Accessories

Mars-Tech Keyless Drill Chuck 1-13mm ... ₹ 1,743.00

MARS-TECH Heavy Duty Keyless Drill chucks are used for CNC machining center and milling machine Special Designed & manufactured against for super heavy torque use. Owning to inspecting strictly & with excellent RUNOUT accuracy and Quality guaranteed the gripping power double than general brand Avoid the drill dropped when used in instaneous change of direction and equipped with spanner hole for tightening prefect safety. Accuracy 50 mm Length within 0.05mm Spanner is optional not included with chuck. YELLOW TIATNIUM COATED JAWS FOR LONG LASTING LIFE.

Grey Torx Screw 4mm 10/12 Mm Long Pack Of 100

Mars-Tech Grey Torx Screw 4mm 10/12 M... ₹ 471.00

Grey Torx Screw are also normal screw quality its just a grey coating Hardened Star Torx Screw for Milling Cutters offered are screws that come with precision design and constructed standards ,These torx screw are hardened upto 50-55 hrc for wear resistance, These Torx screw are mainly used in indexable tools as Boring bar , Insert cutter , milling cutter ,They are precise screw for better grip of carbide insert with pocket.

Mars-Tech ER Nuts ER16 A AND M TYPE pack of 1

Mars-Tech Mars-Tech ER Nuts ER16 A AN... from ₹ 210.00

BOTH type nut hold all ER16 collets from 1 mm to 12 mmMade from alloy steel hardened to 54 – 56rcPrecision ground ID thread and taperER16A Has an id thread of – M22*1.5PER16A Outside diameter is 28 MMNormal key to tighteninginternal cam removes collet when unscrewedMARSTECH CODE IS ER16A HEX TYPE NUT ER16M Collet Nut has an id thread of 19mm X 1.0 pitchER16M Outside diameter is .866 inches (22mm)Outside has castle notches for tighteningER16M Wrench works on this collet nut

Mars-Tech Torx Screw 2.2 MM High Pre... ₹ 106.00

Hardened Star Torx Screw for Milling Cutters offered are screws that come with precision design and constructed standards ,These torx screw are hardened upto 50-55 hrc for wear resistance, These Torx screw are mainly used in indexable tools as Boring bar , Insert cutter , milling cutter ,They are precise screw for better grip of carbide insert with pocket

Mars-Tech Drill chuck Arbor MT Taper ... from ₹ 240.00

Arbor are used for drill chuck kindly choose Male Taper size as per your machine. MT 2 - JT 1 MEANS - MT2 IS MACHINE TAPER , JT1 IS KEYLESS DRILL CHUCK FEMALE TAPER JT1 IS MOSTLY USED FOR SMALL SIZE CHUCK 0-6 MM NEED JT1

Mars-Tech ER 8 COLLET DIN6499B AA 0.... from ₹ 354.00

The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50. ER8 series collets have a capacity of 1mm-5mm. Each ER8 collet has a range of (0.5mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.5mm). For example, ER8-3mm can grab a round shank from 3mm diameter to 2.5mm diameter.

Grey Torx Screw 3.5 mm 8/9/10/12 Mm Long Pack Of 100

Mars-Tech Grey Torx Screw 3.5 mm 8/9/... ₹ 471.00

Grey Torx Screw are also normal screw quality its just a grey coating Hardened Star Torx Screw for Milling Cutters offered are screws that come with precision design and constructed standards ,These torx screw are hardened upto 50-55 hrc for wear resistance, These Torx screw are mainly used in indexable tools as Boring bar , Insert cutter , milling cutter ,They are precise screw for better grip of carbide insert with pocket

Mars-Tech Collet Chuck ER11 A/M type ... from ₹ 1,023.00

Cylindrical Shank / Straight Shank Collet chuck also called Baby collet chuck because of small size and same chuck which comes in BT40 or big tapers , its very useful to increase length of a chuck and also used in turning machine where you have turret sleeve size smaller but straight, its also useful to OEM of machines like Multi Spindle machine and it comes in various sizes to fit in , from Smallest 8 mm to 40 mm are commonly available. This is made from high quality steel and hardened upto 50 hrc for long lasting life ER11 COLLET RANGE FROM 1MM TO 7 MM STANDARD IN VARIATION OF 0.5 MM

Mars-Tech Mars-Tech Torx Key T15 high... ₹ 413.00

T15 hardened torx key t type style small size. This key can be used for T15 size of screw mostly screw used for this size are M3.5 , M4 Quantity 1 means 10 pcs

Mars-Tech Electronic Edge Finder High... ₹ 2,347.00

Electronic Edge Finder 20mm Shank

Torx Screw 3 Mm T8 High Precision ( Pack Of 10 Pcs )

Mars-Tech Torx Screw 3 Mm T8 High Pre... ₹ 106.00

Hardened Star Torx Screw for Milling Cutters offered are screws that come with precision design and constructed standards ,These torx screw are hardened upto 50-55 hrc for wear resistance, These Torx screw are mainly used in indexable tools as Boring bar , Insert cutter , milling cutter ,They are precise screw for better grip of carbide insert with pocket

Mars-Tech Torx Screw 2 mm T6 ( Pack o... ₹ 353.00

Hardened Star Torx Screw for Milling Cutters offered are screws that come with precision design and constructed standards ,These torx screw are hardened upto 50-55 hrc for wear resistance, These Torx screw are mainly used in indexable tools as Boring bar , Insert cutter , milling cutter ,They are precise screw for better grip of carbide insert with pocket 1 Pack is 100 Nos. Choose Length before Adding to Cart

Mars-Tech BT40 locking device Tool Bo... ₹ 2,227.00

BT40 Locking device with Vertical and Horizontal mode to tighten Nut and Pull stud made of Steel and long life. cone for taper is made of aluminium . 3.5 kgs of 1 pc.

Mars-Tech Er32 Spanner Um Type High Q... ₹ 382.00

ER32 UM TYPE Spanner Wrench is made from high quality alloy steel ,Thick material allows high torque without bending,4 point contact ensures no distortion of collet nut while tightening,ER32 Wrench works on all of our UM Type and UM type collet chucks that take ER32 collets

Mars-Tech MARS-TECH ER32 UM NUT pack ... from ₹ 253.00

Holds all ER32 collets from 1 mm to 20 mmMade from alloy steel hardened to 54 – 56rcPrecision ground ID thread and taperHas an id thread of – M40*1.5POutside diameter is 50 MMSUITABLE SPANNER IS ER32UM AND ER32 C TYPE key to tighteninginternal cam removes collet when unscrewedMARSTECH CODE IS ER32UM TYPE NUT

Torx Key Red Color T6,T7,T8,T9,T10,T15,T20

Mars-Tech Torx Key Red Color T6,T7,T8... ₹ 1,180.00

1 pack is one size not mix type if you choose T6 you will get 100 pcs of T6 only if you choose T15 1 qty. you will get 100 pcs Red Flag Type Torx Key T6 TO T20 IN RED COLOR BROWN IRON

Mars-Tech ER40 Spanner UM TYPE And C ... from ₹ 289.00

ER40 UM AND C TYPE Spanner Wrench is made from high quality alloy steel ,Thick material allows high torque without bending,4 point contact ensures no distortion of collet nut while tightening,ER40 Wrench works on all of our UM Type and UM type collet chucks that take ER40 collets

Torx Screw 5 MM T20 High Precision( Pack Of 10 Pcs )

Mars-Tech Torx Screw 5 MM T20 High Pr... from ₹ 106.00

Hardened Star Torx Screw for Milling Cutters offered are screws that come with precision design and constructed standards ,These torx screw are hardened upto 50-55 hrc for wear resistance, These Torx screw are mainly used in indexable tools as Boring bar , Insert cutter , milling cutter ,They are precise screw for better grip of carbide insert with pocket

Torx Key Yellow Color T6,T7,T8,T9,T10,T15,T20 Pack Of 100 NOS.

Torx Key Yellow Color T6,T7,T8,T9,T10,T15,T20

Mars-Tech Torx Key Yellow Color T6,T7... ₹ 1,180.00

Yello Flat Type Torx Key . T6 TO T20 IN Yellow Color , Brown Iron.

Mars-Tech Collet Chuck ER32UM Choose ... from ₹ 1,264.00

Cylindrical Shank / Straight Shank Collet chuck also called Baby collet chuck because of small size and same chuck which comes in BT40 or big tapers , its very useful to increase length of a chuck and also used in turning machine where you have turret sleeve size smaller but straight, its also useful to OEM of machines like Multi Spindle machine and it comes in various sizes to fit in , from Smallest 8 mm to 40 mm are commonly available. This is made from high quality steel and hardened upto 50 hrc for long lasting life ER32 COLLET RANGE FROM 1MM TO 20 MM STANDARD , SUITABLE SPANNER ER32 UM REGO FIX TYPE

Get Extra 1% Discount on Jaibros App only

Find anything you need

GST Input Credit

7-Day Return

Lowest Prices

Highest Quality