Indexable Cutters

ONMU080608 TK1510 steel/stainless steel grade pack of 10

Mars-Tech ONMU080608 TK1510 steel/sta... ₹ 3,800.00

ONMU080608 octagonal shape insert suitable to ONMU Milling cutter with 16 multiple edges.

Mars-Tech Indexable Inserted Endmill ... ₹ 1,444.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use AOMT123608 For Mitsubishi Brand Insert into this , If any other brand have same insert it can also fixed to this.

Mars-Tech 20 mm Indexable Inserted En... ₹ 1,444.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use JDMT1003 from Hitachi Brand Insert into this , If any other brand have same insert it can also fixed to this.

Sold out

Chamfer Cutter 30 Degree 5-16mm range 20mm shank pack of 1

Mars-Tech Chamfer Cutter 30 Degree 5-... ₹ 1,926.00

chamfer cutter for 30 degree suitable to TCMT16t3 insert look at 2nd image for technical details. CHAMFER CUTTER AFM30-TC16-C20-Z1-DIA 5 TO 16 A chamfer mill, or a chamfer cutter useful for many purposes a drill slop , remove burrs from drill hole , 30 degree angel needed for any machining requirement.

Mars-Tech AJX09-50-22-5T JDMW09 Cutte... ₹ 2,166.00

AJX09-50-22-5T JDMW09 Cutter 50mm in 5 PocketsAJX09 is suitable to JDMW09 insert of any Brand will suit this cutter, this is a high feed insert cutter

Mars-Tech WDMW06T320 High Feed insert... ₹ 1,805.00

SKS-2025-200-S25 , SKS-4050R-08-22 ,SKS-2028-40E-S25,SKS-4063R-08-27,SKS-5080R-10-27 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use WDMW06T320 DIJETBrand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Mars-Tech 80 mm SOMT12T3 Indexable Cu... ₹ 3,370.00

80 mm SOMT12T3 Indexable Cutter Dia 80 Mm Suitable To Mitsubishi InsertSOMT12T3 ASX400-050-A04R DIA 50 CUTTER BODY SUITABLE FOR MITSUBISHI SOMT12T3 ASX400-063-A05R DIA 63 MILLING CUTTER INDEXABLE SOMT12T3 ASX400-080-A06R DIA 80 FACE MILLING CUTTER This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use SOMT12T3 Of Mitsubishi and Tabikut Brand Insert into this, If any other brand have same insert it can also fixed to this. there are many Chinese brands also making the same inserts so you can just check descriptions of sizes from other brands to fix this insert.

LNMU0303 Milling Cutter Body Modular Type Dia 63-10

Mars-Tech LNMU0303-63 mm cutter Body ... ₹ 5,686.00

EXN03-63-22-10T This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use LNMU0303 Tungaloy Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Indexable Inserted High Feed Endmill Dia 32 Mm

Indexable Inserted High Feed Endmill Dia 32 Mm Shank 32 Mm 2 Pocket Suitable To JDMW12 For Mitsubishi Insert

Mars-Tech Indexable Inserted High Fee... ₹ 1,805.00

AJX12-C32-32-200L-2T HIGH FEED CUTTER This is Shoulder and Face Milling Cutter high feed used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use JDMW120420 from Mitsubishi Brand Insert into this , If any other brand have same insert it can also fix to this cutter.

Sold out

Mars-Tech 52 Mm Bull Cutter For Die A... from ₹ 1,204.00

52 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT12T3 R6 Of Mostly BrandEMRW-6R-52-22-4T suitable to R6 12T3 insert This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use any ISO inserts Or DIJETof RDMT12T3 RPMT12T3/RDKW12T3/R6 OF mostly brand into this, Recommended Suitable insert for this cutter is TABIKUT Carbide Insert

Mars-Tech EMRW-C25-5R25-150L 25 Mm Bu... from ₹ 963.00

EMRW-C25-5R25-150/200/250 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMW1003/RDKW103/R5 OF mostly brand into this , please note this is not for RPMT10T3 , 10T3 Thickness is 3.87 mm and RPMW1003 thickness is 3.18 mm and 10T3 have chipbreaker design on it.

Mars-Tech Indexable Inserted Endmill ... ₹ 963.00

R390-016A18-11M This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use R390-11T3 For Sandvik Brand Insert into this , If any other brand have same insert it can also fixed to this.

Sold out

Mars-Tech BDMT11T3 Indexable Inserted... from ₹ 1,204.00

BDMT11T3 Indexable Inserted Endmill Dia 16,20,25 mm in 200 Length for Kyocera BrandThis is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use BDMT11T3 For Kyocera Brand Insert into this, If any other brand have same insert it can also fixed to this.

Mars-Tech Back Chamfer Cutter 45 degr... from ₹ 4,248.00

This is Back Chamfer tools Suitable to SPMG inserts

Mars-Tech 50 mm SNMX1206 cutter inser... ₹ 4,754.00

50 mm SNMX1206 cutter insert face mill in 45 degrees and 88 degrees suitable to KORLOY BrandSNMX1206 Facemill Cutter, indexable cutter body RM8 series 8 edges insert cutter body for dia 50,63, and 80 mm in 45-degree and 88 degree This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use SNMX1206 Of Korloy and Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check descriptions of sizes from other brands to fix this insert.

Indexable Inserted Endmill Dia 25 & 32 Mm

Mars-Tech Indexable Inserted Endmill ... from ₹ 2,227.00

XK01.09Z25.025.02 , XK01.09Z32.032.02 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use SDMT09T3 From ZCCCT Brand Insert into this , If any other brand have same insert it can also fixed to this.

Mars-Tech Indexable Inserted Endmill ... from ₹ 1,866.00

R390-025A25-17M,R390-032A32-17M This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use R390-1704 For Sandvik Brand Insert into this , If any other brand have same insert it can also fixed to this.

20mm ball nose suitable insert 10r insert pack of 1(insert not include)

Mars-Tech 20mm ball nose suitable ins... ₹ 4,130.00

SUITABLE TO DIJET INSERTS FULL ROUND INSERT BALLNOSE

Mars-Tech 16 mm ZCMT10 Insert cutter ... ₹ 1,444.00

16 mm ZCMT10 Insert cutter 200 mm long pack of 1SICL 1610S16-2N-150L SICL 2010S20-2N-200L SICL 2510S25-3N-200L This is a Shoulder & Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, this cutter is suitable to ZCMT1003 from DIJET brand. If any other brand has the same insert you can use it for this cutter.