GAUGES

Jaibros Bore Gauge UPT 15 mm Steel ... ₹ 148.00

Bore Gauge UPT 15 mm Steel Pack Of 2 Bore Gauge Steel 15 mm Max Range Made of steel Etched marking Bore gauge is used for taper holes and straight holes, its made steel so it will not rust

Jaibros Center Gauge 55 degree Cent... ₹ 235.00

Used to check thread angle and pitch of thread cutting tools. / Use to grind and position thread cutting tool on a lathe 55 degree angle, tempered with a satin-chrome finish Extremely handy for use in grinding and setting screw cutting tools / Hardened with lapped edges and notches Very useful for finding number of threads per inch through graduations in 1/14" and 1/20" of an inch on center gauge Ground gauging surfaces. Center gauge with inch graduations

Jaibros Center Gauge 60 Degree Inch... ₹ 235.00

Used to check thread angle and pitch of thread cutting tools. / Use to grind and position thread cutting tool on a lathe 60 degree angle, tempered with a satin-chrome finish Extremely handy for use in grinding and setting screw cutting tools / Hardened with lapped edges and notches Very useful for finding number of threads per inch through graduations in 1/14" and 1/20" of an inch on center gauge Ground gauging surfaces. Center gauge with inch graduations

Jaibros Center Square tool for cent... from ₹ 413.00

Hardened and tempered blade. Centre square finds and marks the exact centre of round, square and octagonal parts. Heavy beam and angle cut knife edged blades. Place on the end of round bar and scribe lines to determine centre.

Dasqua radius gauge choose from (1 to 7 mm ) pack of 1

Dasqua Dasqua radius gauge choose ... ₹ 682.00

Radius gauge is used to measure die pattern tools etc to check the radius even a round shanks , Radius of Leaves Included(mm) : 1 mm, 1.25 mm, 1.5 mm, 1.75 mm, 2 mm, 2.25 mm, 2.5 mm, 2.75 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm, 6 mm, 6.5 mm,7 mm Quantity of Leaves : 34.0 The radius measurement is usually in metric form and measured in mm(millimeter). The material used is entirely made up of steel, but a layer or finish of satin chrome can be added since it keeps the radius gauge corrosion free and gives them more rust resistance. The blades used are of the concave and convex shape. It may be swung out of the holder case when necessary readings need to be taken as per the requirement. High quality material and precision machining process ensure product quality.• A traceable QC system is worthy of your trust.• Efficient warehouse and logistics management ensure your delivery time.• A two-year warranty makes you without the worries behind.

Dasqua radius gauge choose from (7.5 to 15 mm ) pack of 1

Dasqua Dasqua radius gauge choose ... ₹ 705.00

Radius gauge is used to measure die pattern tools etc to check the radius even a round shanks , Radius of Leaves Included(mm) : 1 mm, 1.25 mm, 1.5 mm, 1.75 mm, 2 mm, 2.25 mm, 2.5 mm, 2.75 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm, 6 mm, 6.5 mm,7 mm Quantity of Leaves : 34.0 The radius measurement is usually in metric form and measured in mm(millimeter). The material used is entirely made up of steel, but a layer or finish of satin chrome can be added since it keeps the radius gauge corrosion free and gives them more rust resistance. The blades used are of the concave and convex shape. It may be swung out of the holder case when necessary readings need to be taken as per the requirement. High quality material and precision machining process ensure product quality.• A traceable QC system is worthy of your trust.• Efficient warehouse and logistics management ensure your delivery time.• A two-year warranty makes you without the worries behind.

Jaibros Depth Gauge 12 Inch 300mm ₹ 294.00

Mechanical depth gauge upto 300 mm or 12 inch Thread to lock the size , 1 mm Thickness 5 mm Width High Precision Use in many industries and engineering sector to check depth of an object This product is completely manufactured in stainless steel material A depth gauge typical refers to is a precision measurement instrument that is used by mechanical engineers, manufacturing engineers, and machinists among others, to accurately obtain the measurement of the depth of a bored cavity, recess, hole, groove or other similar openings that were created below the surface level of a material.

Sold out

Jaibros Depth Gauge 150MM/6INCH pac... ₹ 235.00

Mechanical depth gauge upto 150 mm or 6 inch Thread to lock the size , 1 mm Thickness 5 mm Width High Precision Use in many industries and engineering sector to check depth of an object This product is completely manufactured in stainless steel material A depth gauge typical refers to is a precision measurement instrument that is used by mechanical engineers, manufacturing engineers, and machinists among others, to accurately obtain the measurement of the depth of a bored cavity, recess, hole, groove or other similar openings that were created below the surface level of a material.

Drill gage 1mm to 13 mm stainless steel pack of 1

Jaibros Drill gage 1mm to 13 mm sta... ₹ 294.00

DENTIFIES DRILL BITS SIZES- Helpful when working with older, unmarked drill bits and bits too small to fit diameter markings 29 MEASURING HOLES- Identified drill bits from 1mm to 13mm in 0.5 mm increments ETCHED MARKINGS- Black graduations to give high contrast and will not wear off NO MATH- Shows drill sizes in exact milimeter DURABLE- Made from heavy duty, rustproof steel

Drill Gage inch size 1/16 to 1/2 inch by 64 THS stainless steel pack of 1

Jaibros Drill Gage inch size 1/16 t... ₹ 294.00

IDENTIFIES DRILL BITS SIZES- Helpful when working with older, unmarked drill bits and bits too small to fit diameter markings 29 MEASURING HOLES- Identified drill bits from 1/16 Inch to 1/2 Inch in 1/64th increments ETCHED MARKINGS- Black graduations to give high contrast and will not wear off NO MATH- Shows drill sizes in both inches and decimal equivalents DURABLE- Made from heavy duty, rustproof steel

Jaibros Edge Finder and Center Find... ₹ 755.00

4 PC Edge & Center Finder ; Time saving positing tool for jig borers, milling and other machines Shank Diameter: 3/8", 1/2" ; Hardened and ground on all working surfaces Locates edge quickly-shoulders, grooves, center points and scribed line .200 & .375 tip w/wiggler & Centering point Quantity: 1 (4 PCS) ; Weight: 7 ounce ; Case INCLUDED 4 PC Edge & Center Finder-one double end type 3/8" shank .200 & .375 tip w/wiggler & centering point-one single end type 1/2" shank .200 tip-one single end type 3/8" shank with centering point-one single end type 1/2" shank with centering pointAll parts are hardened and center less ground to precision tolerance

Jaibros Edge finder set of 5 pieces... ₹ 1,062.00

This is set of 5 pieces 3 are single end and 2 are double end Single End size in inches .500"/.500" , .500"/.200" , Cone Single End 3/8"xcone Double End in Cone - 1/2" and 3/8" Hardened, ground and lapped to close tolerances for diameter and concentrically Helps to quickly locate working edges, shoulders, grooves, center points and scribe lines. 5 Piece Edge Finder Set Hardened Steel Made of Tool Steel- Body and contacts both. Hardened, ground and lapped to close tolerances for diameter and concentrically Cone Double End 1/2" x 3/8" Single End cone 3/8" , Single End cylendrical 1/2"x1/2" and 1/2" x.200" Helps to quickly locate working edges, shoulders, grooves, center points and scribe lines. A great time saving tool

Jaibros Feeler gauge inch size set ... ₹ 295.00

Inch size - .0015 , .002 , 0025 , .003 , .004 , .005 , .006 , .007 , .008 , .009 ,.010 , .011 , .012 , .013 , .014 , .015 , .016 , .017 , .018 , .019 , .020 , .021 , .022 , .023 , .024 , .025 Dual marked blade with milimeter and inch size. made from Steel Make In INDIA

Feeler Gauge mm size 0.03 to 1.0 mm 26 blades

Jaibros Feeler Gauge mm size 0.03 t... ₹ 294.00

Range from 0.03 to 1.0 mm 26 Blades Material: Steel, Color: BLACK Warm notice: there is some anti-rust oil on the Steel feeler gauge to prevent it from rusty, please don?t worry about that Metric sizes (mm): 0.03, 0.04, 0.05, 0.06,0.07, 0.08, 0.09, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.45, 0.50, 0.55, 0.60, 0.65, 0.70, 0.75, 0.80, 0.85 .0.90 ,1.0 mm A feeler gauge is a tool used to measure gap widths. Feeler gauges are mostly used in engineering to measure the clearance between two parts. They consist of a number of small lengths of steel of different thicknesses with measurements marked on each piece. They are flexible enough that, even if they are all on the same hinge, several can be stacked together to gauge intermediate values. It is common to have two sets for imperial units typically measured in thousandths of an inch and metric measurements. Manufactured using high carbon steel and chrome vanadium steel for strength, durability and resistance to corrosion. This master feeler gauge is constructed of durable harden steel that won t wear down over time. It's 26 blades provide accurate measurement of clearances. Each blade has easy to read etched markings. Every blade with its thickness clearly on it, easy to select.

Jaibros Fillet Welding GAGE 1/8 to ... ₹ 943.00

➢Measure Fillet Weld Leg Length ➢Measure Fillet Weld Throat Thickness ➢Use for Inspection of Concave and Convex Fillet weld ➢ Sturdy as this Gauge made of Steel ➢All Numerical Values Indication Size are Clear and Can Easily Read Out ➢Most of reading are in Metric(mm) Features: ➢Measure Fillet Weld Leg Length ➢Measure Fillet Weld Throat Thickness ➢Use for Inspection of Concave and Convex Fillet weld ➢ Sturdy as this Gauge made of Stainless Steel ➢All Numerical Values Indication Size are Clear and Can Easily Read Out ➢Most of reading are in Metric(mm)

Sold out

Jaibros Firm Joint Caliper 16 inch/... from ₹ 614.00

Firm Joint Caliper Steel 16 inch 400mm Made of Stainless Steel Make in India

Jaibros Firm Joint caliper 8 inch s... from ₹ 353.00

Firm Joint Caliper 8 inch/200 mm Made of stainless Steel Blade Width 15mm / 0.59";Material : Metal

Jaibros 6 inch 150 mm vernier type depth gauge multipurpose stainless steel white finish pack of 1

Jaibros Jaibros 6 inch 150 mm verni... ₹ 412.00

Mechanical depth gauge upto 150 mm or 6 inch Thread to lock the size , 1 mm Thickness 5 mm Width High Precision Use in many industries and engineering sector to check depth of an object This product is completely manufactured in stainless steel material A depth gauge typical refers to is a precision measurement instrument that is used by mechanical engineers, manufacturing engineers, and machinists among others, to accurately obtain the measurement of the depth of a bored cavity, recess, hole, groove or other similar openings that were created below the surface level of a material.

Jaibros Jaibros Radius Gage 5.5 mm ... ₹ 590.00

The blades used are of the concave and convex shape Quantity of Leaves : 18.0 Handy device for checking radius of tools and dies easier and faster Each leaf is clearly stamped with the radius size A radius gauge, also known as a fillet gauge, is a tool used to measure the radius of an object. The gauge is placed against the edge to be checked and any light leakage between the blade and edge indicates a mismatch that requires correction. Radius gauges require a bright light behind the object to be measured.

JAIBROS thickness gage feeler gauge 13/20/26 blades stainless steel white finish pack of 1

Jaibros JAIBROS thickness gage feel... from ₹ 299.00

CHOOSE BLADES FROM VARIATION Made of stainless steel 13/20/26 blades feeler gauge Taper size blades of 4 inches. Made In India A feeler gauge is a tool used to measure gap widths. Feeler gauges are mostly used in engineering to measure the clearance between two parts. They consist of a number of small lengths of steel of different thicknesses with measurements marked on each piece. They are flexible enough that, even if they are all on the same hinge, several can be stacked together to gauge intermediate values. It is common to have two sets for imperial units typically measured in thousandths of an inch and metric measurements. Manufactured using high carbon steel and chrome vanadium steel for strength, durability and resistance to corrosion. This master feeler gauge is constructed of durable harden steel that won t wear down over time. It's 26 blades provide accurate measurement of clearances. Each blade has easy to read etched markings. Every blade with its thickness clearly on it, easy to select.

Get Extra 1% Discount on Jaibros App only

Find anything you need

GST Input Credit

7-Day Return

Lowest Prices

Highest Quality