Carbide Milling Inserts
CARBIDE ENDMILL 55 HRC
Carbide Ballnose 55 HRC
Carbide Turning Insert
Carbide Drilling Inserts
Carbide Threading insert
Carbide Ballnose 45 HRC
Carbide Micro Endmill Ballnose
Carbide Endmill 60 HRC
Carbide Ballnose 60 HRC
DEAL
Carbide Single Flute Cutters
Carbide Endmill 45 HRC
Carbide Grooving Insert
Carbide PCD insert
Rib Cutter
Roughing Cutter
Corner Radius Endmill
DLC 3 Flute Cutter
CARBIDE ENDMILL 65 HRC
WOOD CUTTER
Taper Ballnose
Chamfer Cutter Insert
Cermet Turning Inserts
CBN Insert
CARBIDE INSERT
Multifunction Drill
2 flute carbide cutter
Carbide Ballnose 65 HRC
Ballnose 4 Flute
Uncoated End & Ball
6 Flute Endmill
Back to all products
Tabikut
All products
5 & 6 Flute Endmills
Accessories
Accessories APP
Accessories APP 2
All
Ballnose (45 HRC)
Ballnose (55 HRC)
Ballnose (60 HRC)
Ballnose (65 HRC)
Ballnose (65 HRC)
Ballnose (Inserted)
Ballnose - 45 HRC
Ballnose - 55 HRC
Ballnose - 55 HRC 1
Ballnose - 60 HRC
Ballnose - 60 HRC 1
Ballnose 4 Flute (55HRC)
BBT40 Holders
Boring Heads
BPT
BT-30 Type
BT-40 BCA
BT-40 Type
Carbide Cutters
Carbide Cutters
Carbide Drills
CARBIDE15
CBN Inserts
Ceramic
Ceratizit
Cermet
Chamfer Cutter
Chamfering
Collet Chucks
Collet Chuks
Collet ER Types
Collets - ER Type
Corner Radius Endmill
Cutters High Feed
Cylindrical Chuks
Cylndrical Chuck
Dasqua
Deal of the Day
Deskar
Dijet
Drill Chuck - Keyless
Drilling Insert
Duracarb
Edge Finders
Endmill (3 Flute) DLC
Endmill (45 HRC)
Endmill (55 HRC) 1
Endmill (60 HRC)
Endmill (65 HRC)
Endmill (Inserted)
Endmill - 45 HRC
Endmill - 55 HRC
Endmill - 55 HRC 1
Endmill - 60 HRC
Endmill - 60 HRC 1
Endmill 2 Flute
Endmill Ballnose - Micro
ER Collets
ER Nuts
ER Spanners
ER Tap Collets
Find the Edge
Gauges
Grooving Inserts
Grooving Work
Heads - Boring
High Feed
Hitachi
HRC63(Nano Coated)
Indexable Cutters
Inserted Ballnose
Inserted Cutters
Inserted Endmill
Inserts
INSERTS15
ISO40 Holders
Jaibros
JXD
Keyless Drill Chuck
Knob - Pull Studs
Knob- Pull Studs
Korloy
Korloy
Kyocera
Life
Locking Device
Long Neck Cutters
Mars-Tech
Measurings
Metrology
Micro Endmill Ballnose
Milling Inserts
Milling Opertations
Miscellaneous
Mitsubishi
Multifunction Tools
Non Standard Endmills
Non-Ferrous
Nuts - ER
Nuts ER
PCD Inserts
Promo Inserts
Pull Studs
Rougher Endmills
Single Flute Endmill
SK-40 Type
Spanner - ER
Spanners - ER
Straight Shank Chucks
Tabikut
Tabikut Inserts
TaeguTec
Threading Application
Threading Inserts
Tool Boy
Tools Boy
Torx Keys
Torx Screws
TURNING
Turning Holders
Turning Inserts
Turning Usage
U Drill
Uncoated End & Ball
volume discount
Wholesale Deals
Widia
Yuzuki
Z Setter
ZCCCT
Zero Pre Setter
Zero Setter
Tabikut
11IR 1.25 ISO Internal Thr...
₹ 2,537.00
This is Internal Threading Insert for turning machine 1.25 ISO standard threading.
High profile accuracy.
Parameters are mentioned on the Box back side
suitable to mostly steel grade , stainless steel grade
Prevents chip curling, thus less tool breakage.
Tabikut
11IR 1.5 ISO Internal Threa...
₹ 2,537.00
This is Internal Threading Insert for turning machine 1.5 ISO standard threading.
High profile accuracy.
Parameters are mentioned on the Box back side
suitable to mostly steel grade , stainless steel grade
Prevents chip curling, thus less tool breakage.
Tabikut
11IR A60 ISO Internal Threa...
₹ 2,537.00
0.5 -1.5 mm pitch , TPI 48-16
High profile accuracy.
Parameters are mentioned on the Box back side
suitable to mostly steel grade , stainless steel grade
Prevents chip curling, thus less tool breakage.
Tabikut
12 mm 3 flute endmill 75/10...
from ₹ 1,739.00
12 mm 3 flute endmill 75/100 mm long DLC coated pack of 13 Flute Carbide Endmills are used for non-ferrous materials and soft materials like aluminum, brass, copper, silver & gold.
These DLC-coated endmills are for longer life on aluminum or sticky material machining.
The advantage of DLC coating is it reduces friction and makes the chip evacuation more smooth and better surface quality
The large core diameter is more stable
A negative rake angle design enhances the rigidity of the tool
TF25 carbide rod for soft material.
Tabikut
12 mm 4 flute Ballnose 55 h...
₹ 1,672.00
4 Flutes Ballnose.
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable packing
Size of Carbide Ballnose 55 Hrc: 12 mm
The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes if the total length increase flute length remains the same double diameter
Tabikut
12 mm 6 flute cutter HRC55 ...
₹ 1,540.00
CARBIDE ENDMILL 6 FLUTES
75 mm long flute length 25 mm
Can be used on STEEL , STAINLESS STEEL , CAST IRON , GENERAL MACHINING
USED FOR FINISHING OPERATION.
Tabikut
12 mm Carbide Ballnose 45 H...
from ₹ 992.00
12 mm Carbide Ballnose 45 HRC 2 flutes 60/100 Length PACK OF 1Ballnose are 2 Flutes only
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Wine Coating T478iALin Coating, Endmill for Better Life and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmThey are used for Face mills, Shoulder mills, side mills etc ,Plastic Packaging for non-breakable.
Pack of 1 means Qty. 1 Pack of 2 means price is for 2 nos.
Tabikut
12 Mm Carbide Ballnose 55 H...
from ₹ 1,291.00
12 Mm Carbide Ballnose 55 HRC 2 Flutes, Shank 12 MM Flute Length 24 Mm Total Length Is 75/100/150/200 MmSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill , Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing
Flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes, if the total length increase flute length remains same of double of diameter.
Tabikut
12 mm Carbide ballnose 65 H...
from ₹ 3,360.00
12 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1
check 2nd image for dimensions
65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size.
Helix Angel of 35 degree, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM
2 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns
Tabikut
12 mm Carbide Endmill 45 HR...
from ₹ 1,023.00
12 mm Carbide Endmill 45 HRC 4 Flutes 75/100 PACK OF 1Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Wine Coating TiALin Coating, Endmill for Better Life and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmThey are used for Face mills, Shoulder mills, side mills, etc, and Plastic Packaging for non-breakable.
Pack of 1 means Qty. 1 Pack of 2 means price is for 2 nos.
Tabikut
12 mm Carbide Endmill 55 HR...
from ₹ 1,278.00
12 mm Carbide Endmill 55 HRC 4 Flutes Total Length Is 75/100/150/200 MMSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill , Shoulder mill, side mill etc, Plastic Packaging for non breakable packing
Tabikut
12 mm Carbide Endmill 65 HR...
from ₹ 3,469.00
12 mm Carbide Endmill 65 HRC 4 Flutes 12X75 -12x100 LONG PACK OF 1check 2nd image for dimensions
65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size.
Helix Angel of 35 degree, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM
4 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns
Tabikut
12 mm Corner Radius Endmill...
from ₹ 900.00
45 HRC
A Corner radius endmill End Mill is usually used to add a specific radius to a workpiece, operation to remove a sharp edge or burr
or using in some finishing operation
most cutters comes with 0.5 mm , 1 mm 1.5 mm even 2 or 3 mm radius please choose as per the requirment.
Tabikut
12 mm Endmill long flute le...
₹ 4,212.00
12 mm with 50 mm flute length 12 mm shank 100 mm overall length
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing
Tabikut
12 mm Uncoated endmill pack...
from ₹ 1,250.00
2/3/4 Flute uncoated Carbide Endmills are used for non-ferrous materials and soft materials like aluminum, brass, copper, silver, and gold.
A uncoated endmill is for longer life on aluminum or sticky material machining.
The large core diameter is more stable
A negative rake angle design enhances the rigidity of the tool
TF25 carbide rod for soft material.
Tabikut
12MM 25 mm flute length 75 ...
₹ 3,988.00
Throw away price for 423 rs. each
12MM 2 FLUTE UNCOATED 25 MM FLUTE LENGTH
TOTAL LENGTH IS 75 MM ,
DEALS ARE NOT EXCHANGEABLE OR RETURNABLE AT ANY CONDITON
Tabikut
12MM 3D U DRILL DEAL PACK OF 5
₹ 8,850.00
12 MM U DRILL LD3 suitable to SOMT04
SELLING DUE TO HIGH PRODUCTION ITEM.
REGUALR PRICE IS 2000 RS. DEAL PRICE 1500 RS.
QUALITY IS ABSOLUTELY HIGH
NO RETURN OR EXCHANGE ON DEALS
Tabikut
12mm Carbide Ballnose 60 HR...
₹ 2,213.00
Ballnose are 2 flutes and Endmills are 4 flutes
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel , Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable packing
55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS DIFFERENCE IN QUALITY AND MATERIAL, 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL
Tabikut
12mm Carbide Endmill 60 HRC...
from ₹ 2,006.00
12mm Carbide Endmill 60 HRC 4 FlutesSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non breakable packing
Tabikut
12mm Rougher cutter in 75&1...
from ₹ 1,978.00
12mm Rougher cutter in 75&100 mm length pack of 1Rougher cutter are used for roughing cut on component and they are also preferred to use inside holes there you need chip evacuation better and doing a finish cut later.
These are true 55 HRC cutter used on steel and stainless steel material can also work on cast iron and aluminium.