All

Mars-Tech 50mm Bull Cutter RPMT1204 F... from ₹ 1,324.00

50 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPmt1204 R6 Of Mostly BrandEMRW-6R-50-22-4T suitable for R6 insert This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this, Recommended Suitable insert for this cutter is TABIKUT Carbide Insert

Mars-Tech 63 Mm Bull Cutter For Die A... from ₹ 1,541.00

63 mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT1204 R6 Of Mostly BrandEMRW-6R-63-22-4T suitable to R6 insert This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this, Recommended Suitable insert for this cutter is TABIKUT Carbide Insert

Mars-Tech 80 Mm Bull Cutter For Die A... ₹ 2,347.00

80 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT1204 R6 Of Mostly BrandEMRW-6R-80-27-6T suitable for R6 insert This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this, Recommended Suitable insert for this cutter is TABIKUT Carbide Insert

Mars-Tech 50 Mm Bull Cutter For Die A... from ₹ 1,204.00

50 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT12T3 R6 Of Mostly BrandEMRW-6R-50-22-4T suitable to R6 12T3 insert This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts Or DIJETof RDMT12T3 RPMT12T3/RDKW12T2/R6 OF mostly brand into this , Recommended Suitable insert for this cutter is TABIKUT Carbide Insert

Mars-Tech 160 Mm Bull Cutter For Die ... ₹ 7,222.00

EMRW-6R-160-40-8T suitable to R6 insert 6 INCH cutter This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this , Recommended Suitable insert for this cutter is TABIKUT Carbide Insert

Mars-Tech 125 Mm Bull Cutter For Die ... ₹ 4,514.00

EMRW-6R-125-40-7T suitable to R6 insert 5 INCH FACING CUTTER This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this , Recommended Suitable insert for this cutter is TABIKUT Carbide Insert

50 Mm Bull Cutter For Die And Mould | RPMT10T3

Mars-Tech 50 -R5-10T3 Mm Bull Cutter ... ₹ 1,505.00

FOR TECHNICAL DETAILS GO TO SECOND IMAGE OF PRODUCT EMRT-5R-50-22-4T SUITABLE TO R5 RPMT10T3 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT10T3/RPKT10T3/R5 OF mostly brand into this , please note this 10T3 Thickness is 3.87 mm and RPMW1003 thickness is 3.18 mm and 10T3 have design on it. also a picture to check both types.

Mars-Tech 50 mm Bull cutter for die a... ₹ 1,204.00

50 mm Bull cutter for die and mould facing cutter suitable to RPMW1003 R5 of mostly brandEMRW-5R-50-22-4T SUITABLE TO R5 RPMW1003 This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use any ISO inserts of RPMW1003/RPKT1003/R5 OF mostly brand into this, please note this 10T3 Thickness is 3.87 mm and RPMW1003's thickness is 3.18 mm and 10T3 has a design on it. also, a picture to check both types.