2 flute carbide cutter
ARBOR
Ballnose 4 Flute
BBT40
BORING KIT
BST HOLDER
BT30 HOLDER
BT40 BCA
BT40 HOLDER
C TYPE BORING HEAD
CALIPER
Carbide Ballnose 45 HRC
Carbide Ballnose 55 HRC
Carbide Ballnose 60 HRC
Carbide Ballnose 65 HRC
Carbide Drilling Inserts
Carbide Drills
Carbide Endmill 45 HRC
CARBIDE ENDMILL 55 HRC
Carbide Endmill 60 HRC
CARBIDE ENDMILL 65 HRC
Carbide Grooving Insert
CARBIDE INSERT
Carbide Micro Endmill Ballnose
Carbide Milling Inserts
Carbide PCD insert
Carbide Single Flute Cutters
Carbide Threading insert
Carbide Turning Insert
CBN Insert
Cermet Turning Inserts
Chamfer Cutter
Chamfer Cutter Insert
Corner Radius Endmill
CYLINDRICAL COLLET CHUCK
DEAL
DLC 3 Flute Cutter
DRILL CHUCK
EDGE FINDER
ER COLLET
ER Collets
ER NUT
ER SPANNER
ER TAP COLLET
EWN Fine Boring head
EXTENSION
GAUGES
Grooving Bar
Hydraulic Collet
Indexable Cutters
Indexable Milling Cutter
Indexable Milling Cutters
ISO40 HOLDERS
KNURLING TOOL
LOCKING DEVICE
Metrology
Modular Face Mill Cutter
Multifunction Drill
PULL STUDS
Rib Cutter
Rough Boring Head
Roughing Cutter
SDJ Boring heads
Shank Type Cutter
SK40 HOLDERS
Steel Boring Bar
Tapping Attachment
TCT Rough Boring Head
Threading Boring Bar
TORX KEY
TORX KEY HANDLE
TORX KEY HP
TORX SCREW (GREY)
TORX SCREW (HP)
TORX SCREW (NORMAL)
TORX SCREW (UHP)
Turning Tool Holders
U Drill
UHP ER COLLET
Uncoated End & Ball
WOOD CUTTER
Yuzuki
Z setter
ACCkee
BERLT
BPT
CMT
CRM
Dasqua
Deskar
Dijet
Doilf
Duracarb
Elevate Tools
GRIP
HAGG MILL STORE PVT LTD
HARLINGEN
Jaibros
JXD
Kataria
Korloy
KTA
Kyocera
Mars-Tech
Mitsubishi
NICE CUTT
SCODAK
Tabikut
TaeguTec
WIDIA
WoodCut
WS PCD
YG1
YL
Yuzuki
ZCCCT
All products
Accessories
Accessories APP
Accessories APP 2
All
Ballnose (45 HRC)
Ballnose (55 HRC)
Ballnose (60 HRC)
Ballnose (65 HRC)
Ballnose (65 HRC)
Ballnose (Inserted)
Ballnose - 45 HRC
Ballnose - 55 HRC
Ballnose - 55 HRC 1
Ballnose - 60 HRC
Ballnose - 60 HRC 1
Ballnose 4 Flute (55HRC)
BBT40 Holders
Boring Heads
BPT
BT-30 Type
BT-40 BCA
BT-40 Type
Carbide Cutters
Carbide Cutters
Carbide Drills
CARBIDE15
CBN Inserts
Ceramic
Ceratizit
Cermet
Chamfer Cutter
Chamfering
Collet Chucks
Collet Chuks
Collet ER Types
Collets - ER Type
Corner Radius Endmill
Cutters High Feed
Cylindrical Chuks
Cylndrical Chuck
Dasqua
Deal of the Day
Deskar
Dijet
Drill Chuck - Keyless
Drilling Insert
Duracarb
Edge Finders
Endmill (3 Flute) DLC
Endmill (45 HRC)
Endmill (55 HRC) 1
Endmill (60 HRC)
Endmill (65 HRC)
Endmill (Inserted)
Endmill - 45 HRC
Endmill - 55 HRC
Endmill - 55 HRC 1
Endmill - 60 HRC
Endmill - 60 HRC 1
Endmill 2 Flute
Endmill Ballnose - Micro
ER Collets
ER Nuts
ER Spanners
ER Tap Collets
Find the Edge
Gauges
Grooving Inserts
Grooving Work
Heads - Boring
High Feed
Hitachi
Indexable Cutters
Inserted Ballnose
Inserted Cutters
Inserted Endmill
Inserts
INSERTS15
ISO40 Holders
Jaibros
JXD
Keyless Drill Chuck
Knob - Pull Studs
Knob- Pull Studs
Korloy
Korloy
Kyocera
Life
Locking Device
Long Neck Cutters
Mars-Tech
Measurings
Metrology
Micro Endmill Ballnose
Milling Inserts
Milling Opertations
Miscellaneous
Mitsubishi
Multifunction Tools
Non Standard Endmills
Non-Ferrous
Nuts - ER
Nuts ER
PCD Inserts
Promo Inserts
Pull Studs
Rougher Endmills
Single Flute Endmill
SK-40 Type
Spanner - ER
Spanners - ER
Straight Shank Chucks
Tabikut
Tabikut Inserts
TaeguTec
Threading Application
Threading Inserts
Tool Boy
Tools Boy
Torx Keys
Torx Screws
TURNING
Turning Holders
Turning Inserts
Turning Usage
U Drill
Uncoated End & Ball
Widia
Yuzuki
Z Setter
ZCCCT
Zero Pre Setter
Zero Setter
WS PCD
WS PCD insert APKT160404 Pa...
₹ 1,156.00
WS BRAND INSERT
PCD inserts are used for mirror finish on aluminum.
This box has 2 inserts
Tabikut
TCMT16T304 HQ TN30 Cermet i...
₹ 1,888.00
TN30 Cermet grade for Steel & Stainless Steel MachiningGeneral purpose cermet with superior wear resistance and toughness for steel and stainless steel finishing.Tabikut is known as a leading manufacturer of cermets. Cermet is a composite material combining Ceramic and Metal. Typical materials used in cermets are TiC, TiN, TiCN and NbC. Designed to provide long tool life and excellent surface finishes, cermets combine toughness with superior wear resistance."Great for finishing applications
ISO Range - P/M/K (P10-P20)(M10-M20)(K10-K20)IGrade or Coating Type CERMETCoating Layers CermetGrade Color METAL
Tabikut
WNMG080408 specially stainl...
₹ 1,947.00
This is best suitable to STAINLESS STEEL GRADE INSERTS
it can be used on steel but on ss its far better life.
Doilf
DOILF DCGW11T304 pcd insert...
₹ 1,652.00
DCGW11T304 (Suitable Hodler DCMT11T3) PACK OF 2 BOX
Used on Aluninium for Finishing Purpose
Tabikut
2 mm 4 flute Ballnose 55 hr...
₹ 236.00
4 Flutes Ballnose.
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable packing
Size of Carbide Ballnose 55 Hrc: 2mm
The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes if the total length increase flute length remains the same double diameter
Tabikut
1 mm 4 flute Ballnose 55 hr...
₹ 236.00
4 Flutes Ballnose.
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable packing
Size of Carbide Ballnose 55 Hrc: 1mm
The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes if the total length increase flute length remains the same double diameter
TaeguTec
TaeguTec RNMU1205 ML TT9080...
₹ 5,664.00
TAEGUTEC ORIGINAL INSERT
TT9080 GRADE IS GENERAL GRADE USED FOR STEEL / STAINLESS STEEL / FORGING / ETC.
Double-sided economical round inserts for general milling applications with max. 8 index per side (total 16 corners) when the depth of cut is limited.
ITS A DOUBLE SIDED R6 INSERT but it must use on its cutter only.
TAEGU TEC ORIGINAL INSERTS
Tabikut
6 mm Carbide ballnose 65 HR...
from ₹ 966.00
6 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1check 2nd image for dimensions
65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size.
Helix Angel of 35 degree, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM
2 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns
Mars-Tech
cbk and lbk extensions pack...
from ₹ 1,295.00
CBK AND LBK extension are used to increase the length of holder
these are used in SDJ , EWN , TCT , TWIN boring head fine and rought
Tabikut
18 Mm Carbide Endmill 55 HR...
from ₹ 4,071.00
18 Mm Carbide Endmill 55 HRC 18 MM In 18 Mm Shank 4 Flutes Total Length Is 100/150 MMSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing
Mars-Tech
MCKNL/R CNMG1204 other edge...
from ₹ 1,062.00
PLEASE CHECK ANGEL PICTURE BEFORE ORDERING
This boring bar is used for other edge of cnmg which is not used in general usage. you can use this boring bar to use unused side of cnmg insert CNMG1204
Check 2nd image for technical details and spare parts , cnmg also comes in different angles
Mars-Tech
stunl boring bar TNMG16 Bor...
from ₹ 708.00
PLEASE CHECK 2ND IMAGE AND ANGEL BEFORE ORDERING.
This boring bar comes in different angel which change the usage and application kindly check 2nd image of the product for technical details , spare details and angel degree
This is Screw clamp boring bar only. 3.5x12 mm screw will be used.
Mars-Tech
SCLCR -CCMT1204Turning Hold...
₹ 1,033.00
Turning holders comes in Right hand and left hand check the size
also check Shank size 20 mm and 25 mm please choose this by looking at 2nd image for technical angel and spare parts for same.
Turning Holder SCLCL/R 2020 K12 Suitable toCCMT1204 Insert.
WIDIA
Widia XPHT160408 PA120 inse...
₹ 2,950.00
WIDIA ORIGINAL INSERTS
XPHT is Milling insert used for face milling and milling operations
PA120 Grade is general grade for steel grades alloy steel mostly iron grades
08 is the radius for this inserts.
WIDIA
Widia apmt160408PDR MR2500 ...
₹ 1,699.00
APMT160408 MR2500 widia original inserts
MR2500 grade is used for general steel and stainless steel
Make In India product.
Elevate Tools
1.5mm MGMN150 insert Groovi...
₹ 1,652.00
CHOOSE RIGHT HAND OR LEFT HAND CAREFULLY Grooving holders are used for parting and grooving in the turning machine.
1.5 mm grooving holder suitable to KORLOY profile of insert it can fit to any insert naming MGMN150 mm
T max is the maximum grooving capacity of the holder if the grooving capacity is 10 mm it means it can part 20 mm of the round bar maximum.
Tabikut
16ER/IR 1.25 ISO External/I...
₹ 2,537.00
SELECT EXTERNAL AND INTERNAL CAREFULLY.
High profile accuracy.
Parameters are mentioned on the Box back side
suitable to mostly steel grade, stainless steel grade
Prevents chip curling, thus less tool breakage.
Mars-Tech
Turning Holder tnmg MTFNR/L...
₹ 1,033.00
Turning Holder MTFNL/R2525 M16 Suitable to TNMG160404/04/08/12 Insert.
Spare set remain same for right left 2020 shank 2525 shank
Black Color , High Quality , Left Hand.
Suitable Insert TNMG160408 Try Tabikut Turning Insert.
Doilf
MGMN grooving PCD insert in...
₹ 1,416.00
PCD inserts are used for mirror finish on aluminium.
MGMN can suit on KORLOY HOLDER
This box has 2 inserts