All

GRIP Micro Boring Bars Bca 83-10... ₹ 7,690.00

Micro Boring Bars Are Used for Finishing Purpose .20 microns per division radially Please Check Boring Bar Range and Suitable Length for Your JobCartridge and Insert Not Included Order It Seprately

Dasqua DASQUA High Precision Measu... ₹ 7,516.00

Product description Specifications Product Name: Dial Bore GaugeMeasuring Range: 10~18 mm 5111-1110Graduation: ±0.01 mm / 0.0005’’Depth: 100mm Warranty: Two Years Features • Used to measure close tolerance of holes, taper and roundness• Steel body and interchangeable carbide anvils• Extension rods and washers for fine adjustment in sizes to select a specific range• Dial indicator fully protected by a rugged cover Application Bore gauge sets are the most widely used measurement tools for inside measurement of cylindrical objects such as pipes and cylinders. Unlike transfer gauges (telescope gauge, small-hole gauge, beam gauge), the bore gauge does not require a second time measurement but a direct read when performing the measure, which ensured the accuracy. The bore gauge also goes deep enough by its long extension handle that bests the short reach problem of inside micrometers without compromising to the accuracy. Certainly, the three-point inside micrometer may fulfill all your needs and can be handled easily but it costs a lot more than bore gauges do. Advantage Of DASQUA • High quality material and precision machining process ensure product quality；• A traceable QC system is worthy of your trust；• Efficient warehouse and logistics management ensure your delivery time；• A two-year warranty makes you without the worries behind； Tips Of Assemble The Bore Gauge Attach the indicator to the joint by inserting the indicator’s spindle into the joint;Lock the indicator with the screw when the needle of the indicator turns about 1 revolution;Remove the anvil locking nut and install wanted anvils, combination anvils or washers;Install the knurled locking nut tightly. Package Content 1 x Dial Bore Gauge1 x Protective Case1 x Warranty Letter

-53% sale

Carbide drill from 1 mm to 1.9 mm pack of 1 (1 piece as per size choosen )

HAGG MILL STORE PVT LTD Carbide drill from 1 mm to ... ₹ 715.00 ₹ 1,515.00

You will get 1 piece as per you choose variation size. Carbide Drills hrc 55 with h7 of tolerance.

Mars-Tech U Drill 27.5mm from ₹ 3,245.00

Please choose LXD of drill size as it can change drilling capacity which is most important part of drilling. All Size comes in 2D 3D 4D 5D and Suitable Inserts SPMG and WCMX please check from drop down menu .

Mars-Tech U Drill 26.5 mm from ₹ 3,127.00

WIDIA Widia rpmt1204 pa120 grade ... ₹ 1,652.00

RPMT1204 PA120 widia original inserts

Ccmt060204/08 dm125 grade For TABIKUT Steel Pack Of 10

Tabikut Ccmt060204/08 dm125 grade F... ₹ 1,475.00

CCMT060204/08 Steel Grade Used in boring bar for boring application For all General steel stainless steel operations.

Taegutec CCMT09T304 fg ct3000 (cermet)grade pack of 10

TaeguTec Taegutec CCMT09T304 fg ct30... ₹ 3,186.00

TAEGUTEC ORIGINAL INSERTS FG CT3000 is high finish grade used on steel finishing CCMT is a positive insert used on one side

Mars-Tech 12.5 mm u drill LD3 suitab... ₹ 2,360.00

12.5 MM U DRILL LXD-3 - 37.5 MM DRILLING CAPACITY U Drills can be used directly on the surface without a center hole, parameters mentioned on the leaf inside the box, small size u drills are not common and the suitable insert is also small please read 2nd sheet to understand product usability

Kyocera Kyocera ccmt09t304/08 hq tn... from ₹ 2,124.00

KYOCERA ORIGINAL INSERTSThis grade is used for all general steel and forging for finishing purpose this is an original product.TN60 Grade is universal grade can be used on many kind of material but you can use this on forging steel for finishing purposeCCMT insert is a turning insert positive angel used on boring bars and finishing bores used in boring bars for milling one sided insert with 2 edges commonly used 2 other edge can be used with different kind of boring bar

Kyocera turning insert vnmg160404/08 cq cj225 pack of 10

Kyocera Kyocera turning insert vnmg... ₹ 3,245.00

KYOCERA ORIGINAL INSERTS This grade is used for all general steel and forging for finishing purpose this is an original product.CJ225 Grade is universal grade can be used on many kind of material but you can use this on forging steel for finishing purposeVNMG insert is a turning insert with multiple edges used on both sides.

Mars-Tech Indexable Inserted Endmill ... ₹ 963.00

R390-016A18-11M This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use R390-11T3 For Sandvik Brand Insert into this , If any other brand have same insert it can also fixed to this.

Mars-Tech EMRW-C25-5R25-150L 25 Mm Bu... from ₹ 963.00

EMRW-C25-5R25-150/200/250 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMW1003/RDKW103/R5 OF mostly brand into this , please note this is not for RPMT10T3 , 10T3 Thickness is 3.87 mm and RPMW1003 thickness is 3.18 mm and 10T3 have chipbreaker design on it.

Indexable Inserted High Feed Endmill Dia 32 Mm

Indexable Inserted High Feed Endmill Dia 32 Mm Shank 32 Mm 2 Pocket Suitable To JDMW12 For Mitsubishi Insert

Mars-Tech Indexable Inserted High Fee... ₹ 1,805.00

AJX12-C32-32-200L-2T HIGH FEED CUTTER This is Shoulder and Face Milling Cutter high feed used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use JDMW120420 from Mitsubishi Brand Insert into this , If any other brand have same insert it can also fix to this cutter.

Mars-Tech BT30 Morse Taper Adaptor MT... ₹ 1,505.00

BT30 Morse Taper Adaptor MT Holder MT1 MT2 MT3BT30 Morse Taper holder are used to hold Tang type shanks BT30 morse taper Is mainly used to hold Tang Type Drills and Arbours Better shank taper - accurate, rigid toolholder-to-spindle mount Less tool wear and replacement - less scrap Fully ground flange and V-groove, easy on the tool changers for less spindle and changer maintenance Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundRear thread for pull stud is M12 X 1.75

Mars-Tech 20 mm Indexable Inserted En... ₹ 1,444.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use JDMT1003 from Hitachi Brand Insert into this , If any other brand have same insert it can also fixed to this.

Mars-Tech BT40 CBK 2- 85/115/145 Long... from ₹ 2,166.00

BT40 CBK 2- 85/115/145 Long pack of 1LBK also Called CBK is used for holding of SDJ EWN RBH kind of boring holders it has diffrent lengths to choose from variation balanced upto 12000 RPM

GRIP Micro Boring Bars Bca 46-62... ₹ 5,091.00

Micro Boring Bars Are Used for Finishing Purpose .20 microns per division radially Please Check Boring Bar Range and Suitable Length for Your JobCartridge and Insert Not Included Order It Seprately

3 mm cutter in 3 mm shank pack of 20 pcs

Tabikut 3 mm cutter in 3 mm shank p... ₹ 1,534.00

THROW AWAY PRICE unit cost 65 rs each 3MM 4 FLUTE 45 HRC PURPLE COATED CUTTER CAN BE USED ON STEEL , SS CI AND NON FERROUS. DEALS ARE NOT RETURNABLE AND EXCHANGABLE AT ANY CONDITION