Thumbnail for BT40 FMB FMC FMA Face Milling Holder

BT40fmb 32mm Face milling holder arbour

Brand - Mars-Tech

₹ 1,505.00

SKU: JBRS0431

Size

FMB32-70L FMB32-100L FMB32-150L

0 LEFT IN STOCK

Get Rs.50 Off on Prepaid Orders above Rs.500 via Razorpay Gateway. (Discount will be applied During Checkout at Payment Gateway) (No Code Required)

Product description

BT40 facemill holder also called facemill arbour and facemill adaptor

BT40 FMA32 Is mainly used to hold Modular Indexable Cutter with Internal hole of 16 mm any cutter can come with a 32 mm Internal thread but normally 100 mm AND 125 mm Cutters are common in this range.

Made from alloy steel hardened to 54 – 56rc
Balanced to G6.3 at 12,000 rpms
Concentricity is less than .005 micron upto 100 Length and 0.012 upto 200 Length
All critical tool holder surfaces precision ground
Gage length is 50MM,100MM,150MM
Rear thread for pull stud is M16 X 2.0

Products are usually delivered in 3-7 days depending upon your location.

0 have this item in their cart.

Add to cart

Related Product

Mars-Tech BT40 locking device Tool Bo... ₹ 2,227.00

BT40 Locking device with Vertical and Horizontal mode to tighten Nut and Pull stud made of Steel and long life. cone for taper is made of aluminium . 3.5 kgs of 1 pc.

Mars-Tech BT40 Pull Stud In Various D... from ₹ 132.00

BT40 Pull stud used in CNC machines for BT40 holders ISO standard name is MAS403 Pull studs are an important link between machine and tool. The requirements concerning accuracy, rigidity and reliability are very high. Pull studs of minor quality not only decrease the performance of the machine, they are even a safety risk. A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons. made of special steel for higher rigidity proper heat treated ,

Mars-Tech 100 Mm Bull Cutter For Die ... ₹ 3,310.00

100 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT1204 R6 Of Mostly BrandEMRW-6R-100-32-6T suitable for R6 insert100 mm Bull Cutter For Die And Mould Facing Cutter This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this. Recommended Suitable insert for this cutter is TABIKUT Carbide Insert

Mars-Tech BAP400R-100-32-6T Face Mill... ₹ 3,129.00

BAP400R-100-32-6T Face Milling Cutter Dia 100 Modular Type Suitable To APMT11604 Insert face CutterDia 100 cutter for APMT1604 insert , facemill cutter 100 mm apmt1604 Shank Holder FMB-32 BAP400R-100-32-6T EAP400R-100-32-6T, 400R-100-32-6T This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use APMT1604 Of Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Related Products

Mars-Tech BT40 locking device Tool Bo... ₹ 2,227.00

BT40 Locking device with Vertical and Horizontal mode to tighten Nut and Pull stud made of Steel and long life. cone for taper is made of aluminium . 3.5 kgs of 1 pc.

Mars-Tech BT40 Pull Stud In Various D... from ₹ 132.00

BT40 Pull stud used in CNC machines for BT40 holders ISO standard name is MAS403 Pull studs are an important link between machine and tool. The requirements concerning accuracy, rigidity and reliability are very high. Pull studs of minor quality not only decrease the performance of the machine, they are even a safety risk. A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons. made of special steel for higher rigidity proper heat treated ,

Mars-Tech 100 Mm Bull Cutter For Die ... ₹ 3,310.00

100 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT1204 R6 Of Mostly BrandEMRW-6R-100-32-6T suitable for R6 insert100 mm Bull Cutter For Die And Mould Facing Cutter This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this. Recommended Suitable insert for this cutter is TABIKUT Carbide Insert

Mars-Tech BAP400R-100-32-6T Face Mill... ₹ 3,129.00

BAP400R-100-32-6T Face Milling Cutter Dia 100 Modular Type Suitable To APMT11604 Insert face CutterDia 100 cutter for APMT1604 insert , facemill cutter 100 mm apmt1604 Shank Holder FMB-32 BAP400R-100-32-6T EAP400R-100-32-6T, 400R-100-32-6T This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use APMT1604 Of Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

They are must-haves