Carbide Ballnose 45 HRC
Carbide Ballnose 55 HRC
Carbide Ballnose 60 HRC
Carbide Endmill 45 HRC
CARBIDE ENDMILL 55 HRC
Carbide Endmill 60 HRC
Carbide Micro Endmill Ballnose
Carbide Single Flute Cutters
Taper Ballnose
WOOD CUTTER
All products
Accessories
Accessories APP
Accessories APP 2
All
Ballnose (45 HRC)
Ballnose (55 HRC)
Ballnose (60 HRC)
Ballnose (65 HRC)
Ballnose (65 HRC)
Ballnose (Inserted)
Ballnose - 45 HRC
Ballnose - 55 HRC
Ballnose - 55 HRC 1
Ballnose - 60 HRC
Ballnose - 60 HRC 1
Ballnose 4 Flute (55HRC)
BBT40 Holders
Boring Heads
BPT
BT-30 Type
BT-40 BCA
BT-40 Type
Carbide Cutters
Carbide Cutters
Carbide Drills
CARBIDE15
CBN Inserts
Ceramic
Ceratizit
Cermet
Chamfer Cutter
Chamfering
Collet Chucks
Collet Chuks
Collet ER Types
Collets - ER Type
Corner Radius Endmill
Cutters High Feed
Cylindrical Chuks
Cylndrical Chuck
Dasqua
Deal of the Day
Deskar
Dijet
Drill Chuck - Keyless
Drilling Insert
Duracarb
Edge Finders
Endmill (3 Flute) DLC
Endmill (45 HRC)
Endmill (55 HRC) 1
Endmill (60 HRC)
Endmill (65 HRC)
Endmill (Inserted)
Endmill - 45 HRC
Endmill - 55 HRC
Endmill - 55 HRC 1
Endmill - 60 HRC
Endmill - 60 HRC 1
Endmill 2 Flute
Endmill Ballnose - Micro
ER Collets
ER Nuts
ER Spanners
ER Tap Collets
Find the Edge
Gauges
Grooving Inserts
Grooving Work
Heads - Boring
High Feed
Hitachi
Indexable Cutters
Inserted Ballnose
Inserted Cutters
Inserted Endmill
Inserts
INSERTS15
ISO40 Holders
Jaibros
JXD
Keyless Drill Chuck
Knob - Pull Studs
Knob- Pull Studs
Korloy
Korloy
Kyocera
Life
Locking Device
Long Neck Cutters
Mars-Tech
Measurings
Metrology
Micro Endmill Ballnose
Milling Inserts
Milling Opertations
Miscellaneous
Mitsubishi
Multifunction Tools
Non Standard Endmills
Non-Ferrous
Nuts - ER
Nuts ER
PCD Inserts
Promo Inserts
Pull Studs
Rougher Endmills
Single Flute Endmill
SK-40 Type
Spanner - ER
Spanners - ER
Straight Shank Chucks
Tabikut
Tabikut Inserts
TaeguTec
Threading Application
Threading Inserts
Tool Boy
Tools Boy
Torx Keys
Torx Screws
TURNING
Turning Holders
Turning Inserts
Turning Usage
U Drill
Uncoated End & Ball
Widia
Yuzuki
Z Setter
ZCCCT
Zero Pre Setter
Zero Setter
Tabikut
Micro Endmill 0.1 Mm 4mm Sh...
₹ 1,298.00
Micro Endmill 0.1 mm with 2 Flutes and 4 mm Shank 0.2 mm Flute Length
Tabikut
Micro Ballnose R0.15 Dia 0....
₹ 726.00
Micro Ballnose 0.6 mm (0.3 radisu) with 2 Flutes and 4 mm Shank
Tabikut
6 mm Shank 3 mm ballnose 55...
₹ 443.00
6 mm Shank 3 mm ballnose 55 HRC Tabikut pack of 1Carbide Ballnose-55 HRC SPECIAL SIZE OF 3 MM CUTTING DIA 6 MM SHANK
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Black Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing
Tabikut
11 mm Carbide Endmill 55 HR...
₹ 1,947.00
11 mm Carbide Endmill 55 HRC 4 Flutes Total Length 75mm pack of 111 MM in 12 mm shank 75 mm total length
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing
Tabikut
16 mm Carbide Endmill 45 HR...
₹ 2,275.00
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Wine Coating TiALin Coating, Endmill for Better Life and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable.
Pack of 1 means Qty. 1 Pack of 2 means price is for 2 nos.
Tabikut
2.5 mm Carbide Ballnose 2FL...
₹ 293.00
BALLNOSE ARE 2 FLUTES ONLY.
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Wine Coating TiALin Coating, Endmill for Better Life and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable.
Pack of 1 means Qty. 1 Pack of 2 means price is for 2 nos.
Tabikut
6 mm Shank 2 mm ballnose 55...
₹ 443.00
6 mm Shank 2 mm ballnose 55 HRC Tabikut pack of 1Carbide Ballnose-55 HRC SPECIAL SIZE OF 2 MM CUTTING DIA 6 MM SHANK
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Black Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle , Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing
Tabikut
9 mm Carbide Endmill 55 HRC...
₹ 1,699.00
9 mm Carbide Endmill 55 HRC 4 Flutes Total Length 75mm pack of 19 mm endmill with 10 mm shank
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for nonbreakable packing
Tabikut
16 mm Carbide Ballnose 55 H...
from ₹ 3,446.00
16 mm Carbide Ballnose 55 HRC 2 Flutes, Shank 16 MM Flute Length 40 Mm Total Length Is 100/150 MmSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing
The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes , if total length increase flute length remain same of double of diameter.
Tabikut
18 Mm Carbide Endmill 55 HR...
from ₹ 4,071.00
18 Mm Carbide Endmill 55 HRC 18 MM In 18 Mm Shank 4 Flutes Total Length Is 100/150 MMSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing
Tabikut
Taper ballnose 2 mm with 6 ...
₹ 885.00
Taper ballnose 2 mm Dia 1 mm Radius with taper flute length of 20 mmused for steel and stainless steel grade
Tabikut
6mm Shank 2mm Ballnose in ...
₹ 425.00
6mm Shank 2mm Ballnose in 2 flutes (45HRC)Carbide BALLNOSE 2 FLUTES 45 HRC
Solid Carbide Cutter is used to machining Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Black Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable packing
Tabikut
13 mm Carbide Endmill 55 HR...
₹ 2,893.00
13 mm Carbide Endmill 55 HRC 4 Flutes Total Length 100mm pack of 113 MM in 14 mm shank 100 mm total length
Solid Carbide Cutter are used to machine Hard and tough Material , Steel , Alloy Steel , Cast iron , stainless steel and many other material grades.
Bronze TiSiN Coating , Endmill for Better Life and wear resistance.35 Degree Helix Angel , Grain Size 0.5μmUsed for Face Mill , Shoulder mill , side mill etc ,Plastic Packaging for non breakable packing
Tabikut
Taper ballnose 3 mm with 6 ...
₹ 885.00
Taper ballnose 3 mm Dia 1.5 mm Radius with taper flute length of 20 mmused for steel and stainless steel grade
Tabikut
6 mm ballnose for wood cutt...
₹ 614.00
6 mm ball nose for wood cutting router cutting tool pack of 1This 6 mm ballnose is mainly used for non-ferrous materials like wood and mdf board used on router machine.
Tabikut
Micro Endmill 0.9 Mm 4mm Sh...
₹ 561.00
Micro Endmill 0.9 mm with 2 Flutes and 4 mm Shank 1.8 mm Flute Length
HRC60
Tabikut
Taper ballnose 1.5 mm with ...
₹ 885.00
Taper ballnose 1.5 mm Dia 0.75 mm Radius with taper flute length of 28 mmused for steel and stainless steel grade
Tabikut
2mmx75mm long Carbide Endmi...
₹ 350.00
Solid Carbide Cutter are used to machine Hard and tough Material , Steel , Alloy Steel , Cast iron , stainless steel and many other material grades.
Bronze TiSiN Coating , Endmill for Better Life and wear resistance.35 Degree Helix Angel , Grain Size 0.5μmUsed for Face Mill , Shoulder mill , side mill etc. ,Plastic Packaging for non breakable packing
Tabikut
6mm Shank 2.5 mm Ballnose I...
₹ 425.00
6mm Shank 2.5 mm Ballnose In 2 Flutes (45HRC)Carbide BALLNOSE 2 FLUTES 45 HRC
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Black Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing
Tabikut
8 mm Single Flute Endmill C...
from ₹ 1,520.00
8 mm Single Flute Endmill Carbide Pack Of 1ENDMILL -DIAMETER 8mm-SHANK DIAMETER 8mm-FLUTES 1-FLUTE LENGTH-25/32/42/52-TOTAL LENGTH -/60/80/90
CEMENTED CARBIDE: These end mills are made from ultra-fine grain cemented carbide material with good milling, and cutting performance, ensuring high work efficiency.
FIT FOR MANY MACHINES: Fit for many milling machines or CNC cutting machines.
SHARP: Single flute-designed end mill with a sharp cutting edge would offer a smooth cutting surface and chip clearing.
HANDEL DIFFERENT MATERIAL: These end mills can be used for cutting acrylic, PVC, MDF, density board, Wood, Gold, Aluminium, and many other soft materials