Mars-Tech
-50% sale
Mars-Tech BT30 Side Lock Adaptor , SLA 10,12,16,20,25,32 mm For Cylendrical Shank ₹ 1,250.00 ₹ 2,500.00
BT30 SLA holder also called SIDE LOCK HOLDER BT30 SIDE LOCK Is mainly used to hold Cylendrical/Straight Shank of anything like Indexable Cutter , Baby chuck , Carbide Drill whatever with straight shank can hold into for better rigidity and strength it range from 16 mm to 32 mm as small diameter of shank can be hold in standard collet chuck.  Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundGage length is 50MM,63MM,80MM,90MMRear thread for pull stud is M12 X 1.75
-50% sale
Mars-Tech BT30 FMB FMC FMA Face Milling Holder Arbour FMA22 ₹ 1,250.00 ₹ 2,500.00
BT30 facemill holder also called facemill arbour and facemill adaptor  BT30 FMA22 Is mainly used to hold Modular Indexable Cutter with Internal hole of 16 mm any cutter can come with a 22 mm Internal thread but normally 50 mm AND 63 mm Cutters are common in this range.  Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundGage length is 45MM,90MMRear thread for pull stud is M12 X 1.75
sale
Mars-Tech BT30 Er Collet Chuck Bt30 Er32 Um-70l,100l,150l from ₹ 1,100.00 ₹ 2,200.00
BT30 Tool Holder accepts all ER32 collets ER32 Collets range from 1 mm to 20 mm Thread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundCoolant through capabilityGage length is 70mm,100MM,150MMRear thread for pull stud is M12 X 1.75 All holders have capability to become through coolant by simply removing screw in the center by allen key
Mars-Tech BT30 ER Collet Chuck BT30 ER25UM-70L,100L ₹ 1,250.00
BT30 Tool Holder accepts all ER25 collets ER25 Collets range from 1 mm to 16 mm Thread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundCoolant through capabilityGage length is 70mm,100MMRear thread for pull stud is M12 X 1.75 All holders have capability to become through coolant by simply removing screw in the center by allen key
-50% sale
Mars-Tech BT30 Morse Taper Adaptor MT Holder MT1 MT2 MT3 ₹ 1,250.00 ₹ 2,500.00
BT30 Morse Taper holder are used to hold Tang type shanks  BT30 morse taper Is mainly used to hold Tang Type Drills and Arbours   Better shank taper - accurate, rigid toolholder-to-spindle mount Less tool wear and replacement - less scrap Fully ground flange and V-groove, easy on the tool changers for less spindle and changer maintenance Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundRear thread for pull stud is M12 X 1.75
-50% sale
Mars-Tech BT30 FMB FMA16 BT30 FMB FMC FMA Face Milling Holder Arbour FMA16 ₹ 1,250.00 ₹ 2,500.00
BT30 facemill holder also called facemill arbour and facemill adaptor  BT30 FMA16 Is mainly used to hold Modular Indexable Cutter with Internal hole of 16 mm any cutter can come with a 16 mm Internal thread but normally 40 mm Cutters are common in this range.  Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundGage length is 40mm,80MMRear thread for pull stud is M12 X 1.75
Sold out -50% sale
Mars-Tech BT30 ER Collet Chuck BT30 ER16A-70L,100L, ₹ 1,250.00 ₹ 2,500.00
BT30 Tool Holder accepts all ER16 collets ER16 Collets range from 1 mm to 12 mm Thread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundCoolant through capabilityGage length is 70mm,100MM Rear thread for pull stud is M12 X1.75 All holders have capability to become through coolant by simply removing screw in the center by allen key 
-50% sale
Mars-Tech BT30 JT6 Adaptor Holder for JT6 Arbour ₹ 1,250.00 ₹ 2,500.00
BT30 JT6 holders are mainly used to hold JT6 Female Taper , This holder have JT6 Male taper if anything like drill chuck have internal taper of JT6 so it can hold it easily with rigidity.  Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundRear thread for pull stud is M12X 1.75
-50% sale
Mars-Tech BT30 FMB FMC FMA Face Milling Holder Arbour FMA32 ₹ 1,250.00 ₹ 2,500.00
BT30 facemill holder also called facemill arbour and facemill adaptor  BT30 FMA32 Is mainly used to hold Modular Indexable Cutter with Internal hole of 16 mm any cutter can come with a 32 mm Internal thread but normally 100 mm AND 125 mm Cutters are common in this range.  Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundGage length is 60MMRear thread for pull stud is M12X1.75
-50% sale
Mars-Tech BT30 FMB FMC FMA Face Milling Holder Arbour FMA27 ₹ 1,250.00 ₹ 2,500.00
BT30 facemill holder also called facemill arbour and facemill adaptor  BT30 FMA27 Is mainly used to hold Modular Indexable Cutter with Internal hole of 16 mm any cutter can come with a 27 mm Internal thread but normally 80 mm AND 100 mm Cutters are common in this range.  Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundGage length is 45MM,90MMRear thread for pull stud is M12 X 1.75
-50% sale
Mars-Tech Bt30 Er Collet Chuck Bt30 Er20a-70L,100L ₹ 1,250.00 ₹ 2,500.00
BT30 Tool Holder accepts all ER20 collets ER20 Collets range from 1 mm to 14 mm Thread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundCoolant through capabilityGage length is 70mm,100MMRear thread for pull stud is M12X1.75
Sold out -50% sale
Mars-Tech BT30 Er Collet Chuck Bt30 Er11a-70l,100l ₹ 1,250.00 ₹ 2,500.00
BT30 Tool Holder accepts all ER11 colletsThread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micronAll critical tool holder surfaces precision groundCoolant through capabilityGage length is 70mm Rear thread for pull stud is M12 X 1.75 All holders have capability to become through coolant by simply removing screw in the center by allen key

GST Input Credit

Get Business Invoice and get 100% GST Input Credit for your Order.

7-Day Return

If you dont like the Product, Return it within 7 Days and get 100% refund.

Lowest Prices

We are offering Products at Lowest Prices in the Industry*.

Highest Quality

We strive to provide best quality product .