BT40 fmb 22 mm Face milling holder arbour pack of 1

₹ 1,505.00
SKU: JBRS0418

Size

FMB22-50L FMB22-100L FMB22-150L FMB22-200L FMB22-250L FMB22-300L FMB22-350L EXTENSION 22-50L EXTENSION 22-100L

BT40 fmb 22 mm Face milling holder arbour pack of 1

Brand - Mars-Tech
₹ 1,505.00
SKU: JBRS0418

Size

FMB22-50L FMB22-100L FMB22-150L FMB22-200L FMB22-250L FMB22-300L FMB22-350L EXTENSION 22-50L EXTENSION 22-100L
0 LEFT IN STOCK

Get Rs.50 Off on Prepaid Orders above Rs.500 via Razorpay Gateway. (Discount will be applied During Checkout at Payment Gateway) (No Code Required)

Product description

BT40 facemill holder also called facemill arbour and facemill adaptor 

BT40 FMA22 Is mainly used to hold Modular Indexable Cutter with Internal hole of 16 mm any cutter can come with a 22 mm Internal thread but normally 50 mm AND 63 mm Cutters are common in this range. 

Made from alloy steel hardened to 54 – 56rc
Balanced to G6.3 at 12,000 rpms
Concentricity is less than .005 micron upto 100 Length and 0.012 upto 200 Length
All critical tool holder surfaces precision ground
Gage length is 50MM,100MM,150MM,200MM,250MM,300MM
Rear thread for pull stud is M16 X 2.0

Products are usually delivered in 3-7 days depending upon your location.

0 have this item in their cart.
Add to cart

Add to cart

Related Products

50 Mm Bull Cutter For Die And Mould
Mars-Tech 50mm Bull Cutter RPMT1204 F... from ₹ 1,324.00
50 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPmt1204 R6 Of Mostly BrandEMRW-6R-50-22-4T suitable for R6 insert This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this, Recommended Suitable insert for this cutter is TABIKUT Carbide Insert 
52mm bull cutter
Mars-Tech 52 Mm Bull Cutter For Die A... ₹ 1,505.00
52 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT1204 R6 Of Mostly BrandEMRW-6R-52-22-4T suitable to R6 1204 insert This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use any ISO inserts RPMT1204/RDKW1204/R6 OF mostly brand into this, acct, Chorley, targeted, dijet, Kyocera, Mitsubishi.
63 mm Bull Cutter
Mars-Tech 63 Mm Bull Cutter For Die A... from ₹ 1,541.00
63 mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT1204 R6 Of Mostly BrandEMRW-6R-63-22-4T suitable to R6 insert This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this, Recommended Suitable insert for this cutter is TABIKUT Carbide Insert 
BAP300R-50-22-6T Face Milling Cutter
Mars-Tech BAP300R-50-22-6T Face Milli... ₹ 2,227.00
BAP300R-50-22-6T Face Milling Cutter Dia 50 Modular Type Suitable To APMT1135 Insert Bull CutterDia 50 cutter for APMT1135 insert, face mill cutter 50 mm apmt1135 This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use APMT1135 Of Tabikut Brand Insert into this If any other brand have same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check the description of the size from other brands to fix this insert.

GST Input Credit

Get Business Invoice and get 100% GST Input Credit for your Order.

7-Day Return

If you dont like the Product, Return it within 7 Days and get 100% refund.

Lowest Prices

We are offering Products at Lowest Prices in the Industry*.

Highest Quality

We strive to provide best quality product .
Jaibros is a Registered Trademark owned by HAKUNA MATATA RETAIL PRIVATE LIMITED 2009-