Chamfer Cutter
Chamfer Cutter Insert
Indexable Cutters
Indexable Milling Cutter
Indexable Milling Cutters
Modular Face Mill Cutter
Shank Type Cutter
All products
Accessories
Accessories APP
Accessories APP 2
All
Ballnose (45 HRC)
Ballnose (55 HRC)
Ballnose (60 HRC)
Ballnose (65 HRC)
Ballnose (65 HRC)
Ballnose (Inserted)
Ballnose - 45 HRC
Ballnose - 55 HRC
Ballnose - 55 HRC 1
Ballnose - 60 HRC
Ballnose - 60 HRC 1
Ballnose 4 Flute (55HRC)
BBT40 Holders
Boring Heads
BPT
BT-30 Type
BT-40 BCA
BT-40 Type
Carbide Cutters
Carbide Cutters
Carbide Drills
CARBIDE15
CBN Inserts
Ceramic
Ceratizit
Cermet
Chamfer Cutter
Chamfering
Collet Chucks
Collet Chuks
Collet ER Types
Collets - ER Type
Corner Radius Endmill
Cutters High Feed
Cylindrical Chuks
Cylndrical Chuck
Dasqua
Deal of the Day
Deskar
Dijet
Drill Chuck - Keyless
Drilling Insert
Duracarb
Edge Finders
Endmill (3 Flute) DLC
Endmill (45 HRC)
Endmill (55 HRC) 1
Endmill (60 HRC)
Endmill (65 HRC)
Endmill (Inserted)
Endmill - 45 HRC
Endmill - 55 HRC
Endmill - 55 HRC 1
Endmill - 60 HRC
Endmill - 60 HRC 1
Endmill 2 Flute
Endmill Ballnose - Micro
ER Collets
ER Nuts
ER Spanners
ER Tap Collets
Find the Edge
Gauges
Grooving Inserts
Grooving Work
Heads - Boring
High Feed
Hitachi
Indexable Cutters
Inserted Ballnose
Inserted Cutters
Inserted Endmill
Inserts
INSERTS15
ISO40 Holders
Jaibros
JXD
Keyless Drill Chuck
Knob - Pull Studs
Knob- Pull Studs
Korloy
Korloy
Kyocera
Life
Locking Device
Long Neck Cutters
Mars-Tech
Measurings
Metrology
Micro Endmill Ballnose
Milling Inserts
Milling Opertations
Miscellaneous
Mitsubishi
Multifunction Tools
Non Standard Endmills
Non-Ferrous
Nuts - ER
Nuts ER
PCD Inserts
Promo Inserts
Pull Studs
Rougher Endmills
Single Flute Endmill
SK-40 Type
Spanner - ER
Spanners - ER
Straight Shank Chucks
Tabikut
Tabikut Inserts
TaeguTec
Threading Application
Threading Inserts
Tool Boy
Tools Boy
Torx Keys
Torx Screws
TURNING
Turning Holders
Turning Inserts
Turning Usage
U Drill
Uncoated End & Ball
Widia
Yuzuki
Z Setter
ZCCCT
Zero Pre Setter
Zero Setter
Mars-Tech
32 mm Indexable Inserted En...
from ₹ 2,256.00
32 mm Indexable Inserted Endmill Dia 4 Pocket Suitable To APMT1135This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low , They are hardened 45-50 HRC not to wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of APMT1135 into this
Different Lengths and Different Shank size please choose before adding to cart
Mars-Tech
LNMU0303 Cutter 32mm -150/2...
₹ 3,852.00
EXN03-C32-32-200L-5T ,EXN03-C32-32-150L-5T
This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use LNMU0303 Tungaloy Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.
Mars-Tech
160 Mm Bull Cutter For Die ...
₹ 7,222.00
EMRW-6R-160-40-8T suitable to R6 insert 6 INCH cutter
This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this ,
Recommended Suitable insert for this cutter is TABIKUT Carbide Insert
Mars-Tech
BAP400R-160-40-8T Face Mill...
₹ 6,667.00
BAP400R-160-40-8T Face Milling Cutter Dia 160/6.3 INCH Modular Type Suitable To APMT11604 Insert Face CutterDia 160 cutter for APMT1604 insert , facemill cutter 160 mm apmt1604 Shank Holder FMB-40
BAP400R-160-40-8T EAP400R-160-40-8T, 400R-160-40-8T
This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use APMT1604 Of Tabikut Brand Insert into this, If any other brand have same insert it can also fixed to this. there are many Chinese brands also making the same inserts so you can just check the description of the size from other brands to fix this insert.
Mars-Tech
LNMU0303- 50 mm cutter Mil...
₹ 4,484.00
EXN03-50-22-8T
This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use LNMU0303 Tungaloy Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.
Mars-Tech
jdmw09 25mm Indexable Inser...
₹ 1,192.00
AJX09-C25-25-200L-2T
This is Shoulder and Face Milling Cutter high feed used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use JDMW09 from Mitsubishi Brand Insert into this , If any other brand have same insert it can also fixed to this.
Mars-Tech
125 Mm Bull Cutter For Die ...
₹ 4,514.00
EMRW-6R-125-40-7T suitable to R6 insert 5 INCH FACING CUTTER
This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this ,
Recommended Suitable insert for this cutter is TABIKUT Carbide Insert
Mars-Tech
SDMT1204 Milling Cutter dia...
₹ 3,033.00
SDMT1204 WIDIA milling cutter body dia 80 6 pockets 27 mm hole.
This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use SDMT1204 Of WIDIA and Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.
Mars-Tech
BAP400R-125-40-7T Face Mill...
₹ 4,634.00
BAP400R-125-40-7T Face Milling Cutter Dia 125 Modular Type Suitable To APMT11604 Insert Face CutterDia 125 cutter for APMT1604 insert , facemill cutter 125 mm apmt1604 Shank Holder FMB-40
BAP400R-125-40-7T EAP400R-125-40-7T, 400R-125-40-7T
This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use APMT1604 Of Tabikut Brand Insert into this, If any other brand have same insert it can also fixed to this. there are many Chinese brands also making the same inserts so you can just check description of size from other brands to fix this insert.
Mars-Tech
LNMU0303 40 mm cutter Body ...
₹ 4,484.00
EXN03-40-22-6T
This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use LNMU0303 Tungaloy Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.
Mars-Tech
16 mm ballnose T2139 C16-8R...
from ₹ 2,407.00
This is inserted ballnose suitable to only Walter brand insert with an R8 radius please check your insert before buying.
Insert are not included with the order you need to buy it separately.
150 and 200 Length please check in variation
Mars-Tech
Indexable Inserted Endmill ...
from ₹ 1,204.00
R390-016A16-11M,R390-020A20-11M,R390-025A25-11M
This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use R390-11T3 For Sandvik Brand Insert into this , If any other brand have same insert it can also fixed to this.
Mars-Tech
63MM Bull Cutter In 5 Pocke...
₹ 1,866.00
63MM Bull Cutter In 5 Pockets EMRW6R-63-22-5TEMRW6R-63-22-5T Cutter is suitable for ISO insert of R6 RPMT1204 of most brands this is 5 pocket cutter for finishing purposes
Mars-Tech
R490-1404 Milling indexable...
from ₹ 1,757.00
R490-1404 Milling cutter is suitable to R490 insert of Sandvik Brand or any insert with same size.
The cutters are very high precision quality
Mars-Tech
63 Mm For SDMT1205 High Fee...
₹ 2,347.00
63 Mm For SDMT1205 High Feed Cutter Dia Insert Suitable To Deskar Gesac BrandASRF12-50-22-4T , ASRF12-63-22-4T
This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use SDMT1205 Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making same inserts so you can just check descriptions of size from other brands to fix this insert.
Mars-Tech
63mm SDMT1204 Milling Cutte...
₹ 2,275.00
63mm SDMT1204 Milling Cutter dia 63 mm white pack of 1SDMT1204 WIDIA milling cutter body dia 63 4 pockets 22 mm hole.
This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use SDMT1204 Of WIDIA and Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check descriptions of sizes from other brands to fix this insert.
Mars-Tech
50 mm SDMT1204 Milling Cutt...
₹ 2,021.00
50 mm SDMT1204 Milling Cutter suitable to Widia Insert M690 series pack of 1SDMT1204 WIDIA milling cutter body dia 50 4 pockets 22 mm hole.
This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use SDMT1204 Of WIDIA and Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check descriptions of sizes from other brands to fix this insert.
Mars-Tech
80 mm other edge apmt16 cut...
₹ 3,611.00
80MM APMT1604 OTHER EDGE 75 DEGREE CUTTER 5 POCKET
Dia 80 cutter for APMT1604 insert , facemill cutter 63 mm apmt1604 Shank Holder FMB-27
This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use APMT1604 Of Tabikut Brand Insert into this, If any other brand have same insert it can also fixed to this. there are many Chinese brands also making the same inserts so you can just check descriptions of size from other brands to fix this insert.
Mars-Tech
BAP300R-40-16/22-4T Face Mi...
from ₹ 1,475.00
BAP300R-40-16/22-4T Face Milling Cutter Dia 40 Modular APMT1135 Insert CutterThis is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use APMT1135 Of Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check the description of the size from other brands to fix this insert.
HAVE A CLEAR VIEW OF PRODUCT IN BELOW VIDEO
Mars-Tech
50 mm Apmt1135 other edge 7...
₹ 1,750.00
50 mm Apmt1135 other edge insert 75 degree 4 pocket Dia 50- 4 pocket cutter for APMT135 insert , facemill cutter 50 mm apmt1135 Shank Holder FMB-22
This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use APMT1135 Of Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check the description of the size from other brands to fix this insert.