Mars-Tech
All products Accessories All Ballnose Ballnose (45 HRC) Ballnose (55 HRC) Ballnose (60 HRC) Ballnose (65 HRC) Ballnose - 45 HRC Ballnose - 55 HRC Ballnose - 60 HRC BBT40 Holders Boring Heads BPT BT-30 Type BT-40 BCA BT-40 Type Carbide Cutters Carbide Cutters CBN Inserts Ceratizit Chamfer Cutter Chuks SK-40 Type Collet Chuck BT-30 Collet Chuck BT-40 Collet Chuks Collets - ER Type Collets - Tap Cutters - Chamfer Cylndrical Chuks Dasqua Deal of the Day Digital Vernier Dijet Drill Chuks (Keyless) Drills U Type Duracarb Edge Finders Edge Finders Endmill Endmill (45 HRC) Endmill (55 HRC) Endmill (60 HRC) Endmill - 45 HRC Endmill - 55 HRC Endmill - 60 HRC Endmill Ballnose - Micro ER Collets ER Nuts ER Spanners ER Tap Collets Find the Edge Flag Keys Gauges Grooving Insert Grooving Work Hand Tools High Feed Hitachi Inserted Ballnose Inserted Cutters Inserted Endmill Inserts Inserts ISO40 Holders Jaibros Jaibros JXD Keyless Drill Chuck Knob- Pull Studs Korloy Korloy Kyocera Life Locking Device Mars-Tech Measurings Metrology Micro Endmill Ballnose Milling Insert Milling Opertations Miscellaneous Nuts - ER PCD Inserts Pull Studs Single Flute Endmill SK-40 Type Spanners - ER Straight Shank Chucks Superb Screw Tabikut TaeguTec Taparia Taparia Threading Application Threading Insert Tool Boy Tool Holder - Turning Torx Keys Torx Screw Turning Holders Turning Insert Turning Usage U Drill Upsell 1 (Insert for Cutter) Vernier Widia Widia Workshop Tools Yuzuki Z Setter ZCCCT Zero Setter
sale
Mars-Tech 50 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPmt1204 R6 Of Mostly Brand from ₹ 950.00 ₹ 1,800.00
EMRW-6R-50-22-4T suitable to R6 insert This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this , Recommended Suitable insert for this cutter is TABIKUT Carbide Insert 
sale
Mars-Tech EMRW-C25-6R25-150L 25 Mm Bullnose Suitable To RPMT1204 Insert from ₹ 1,000.00 ₹ 2,000.00
This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT1204/RDKW1204,R6 OF mostly brand into this , Suggested insert RPMT1204 OF Tabikut Brand.
-50% sale
Mars-Tech 80 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT1204 R6 Of Mostly Brand ₹ 1,650.00 ₹ 3,300.00
EMRW-6R-80-27-6T suitable to R6 insert This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this , Recommended Suitable insert for this cutter is TABIKUT Carbide Insert 
sale
Mars-Tech 63 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT1204 R6 Of Mostly Brand from ₹ 1,250.00 ₹ 2,500.00
EMRW-6R-63-22-4T suitable to R6 insert This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this , Recommended Suitable insert for this cutter is TABIKUT Carbide Insert 
-50% sale
Mars-Tech 50 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RDMT1204MOTN HITACHI brand ₹ 1,200.00 ₹ 2,400.00
TRS-6R-50-22-4T suitable to hitachi R6 insert This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of Hitachi Brand Insert RDMT1204 MOTN Recommended Suitable insert for this cutter is TABIKUT Carbide Insert 
-56% sale
Mars-Tech 16MM BULLNOSE for 08T2 insert ₹ 800.00 ₹ 1,800.00
EMRT-C16-4R16-200L This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMW08T2/RDKW08T2/R4 OF mostly brand into this ,
-38% sale
Mars-Tech 52 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT1204 R6 Of Mostly Brand ₹ 1,250.00 ₹ 2,000.00
EMRW-6R-52-22-4T suitable to R6 1204 insert This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts RPMT1204/RDKW1204/R6 OF mostly brand into this ,zccct,korloy,taegutec,dijet,kyocera,mitsubishi,
sale
Mars-Tech EMR-C25-5R25- 25 Mm Bullnose Suitable To RPMT10T3 Insert from ₹ 800.00 ₹ 1,600.00
EMRT-C25-5R25-150/200/250 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMW10T3/RPKT103/R5 OF mostly brand into this ,   please note this is not for 1003 , 10T3 Thickness is 3.87 mm and RPMW1003 thickness is 3.18 mm and 10T3 have design on it. 
sale
Mars-Tech 25 mm Bullnose reduce shank 20 mm suitable to RPMW1003 insert from ₹ 800.00 ₹ 1,600.00
EMRW-C20-5R25-150L EMRW-C20-5R25-200L This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMW1003/RDKW103/R5 OF mostly brand into this ,   please note this is not for RPMT10T3 , 10T3 Thickness is 3.87 mm and RPMW1003 thickness is 3.18 mm and 10T3 have design on it. 
Sold out -29% sale
Mars-Tech 160 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT1204 R6 Of Mostly Brand ₹ 6,000.00 ₹ 8,400.00
EMRW-6R-160-40-8T suitable to R6 insert 6 INCH cutter This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this , Recommended Suitable insert for this cutter is TABIKUT Carbide Insert 
Sold out sale
Mars-Tech 20 MM Bull Cutter Suitable To RPMW0802 R4 Insert In 150 And 200 Length from ₹ 800.00 ₹ 1,600.00
EMRW-C20-4R20-150L EMRW-C20-4R20-200L This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMW0802/RDKW0802/R4 OF mostly brand into this ,
sale
Mars-Tech 20 MM bull cutter suitable to RPMW1003 insert in 150 and 200 length from ₹ 500.00 ₹ 1,000.00
EMRW-C20-5R20-150L EMRW-C20-5R20-200L This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMW1003/RDKW103/R5 OF mostly brand into this ,   please note this is not for RPMT10T3 , 10T3 Thickness is 3.87 mm and RPMW1003 thickness is 3.18 mm and 10T3 have design on it. 
-50% sale
Mars-Tech 50 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT12T3 R6 Of Mostly Brand ₹ 1,000.00 ₹ 2,000.00
EMRW-6R-50-22-4T suitable to R6 12T3 insert This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts Or DIJETof RDMT12T3 RPMT12T3/RDKW12T2/R6 OF mostly brand into this , Recommended Suitable insert for this cutter is TABIKUT Carbide Insert 
sale
Mars-Tech 32 MM Bull Nose In 32 Mm Shank - 2 Pocket Suitable To RPMT1204 /R6 from ₹ 1,500.00 ₹ 3,000.00
EMRW-C32-6R32-200L-2T , EMRW-C32-6R32-250L-2T This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT1204/RDKW1204,R6 OF mostly brand into this , Suggested insert RPMT1204 OF Tabikut Brand.
-44% sale
Mars-Tech 125 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT1204 R6 Of Mostly Brand ₹ 3,750.00 ₹ 6,600.00
EMRW-6R-125-40-7T suitable to R6 insert 5 INCH FACING CUTTER This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this , Recommended Suitable insert for this cutter is TABIKUT Carbide Insert 
Mars-Tech 100 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT1204 R6 Of Mostly Brand ₹ 2,500.00
EMRW-6R-100-32-6T suitable to R6 insert This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this , Recommended Suitable insert for this cutter is TABIKUT Carbide Insert 
-49% sale
Mars-Tech 63MM Bull Cutter In 5 Pockets EMRW6R-63-22-5T ₹ 1,550.00 ₹ 3,000.00
EMRW6R-63-22-5T Cutter is suitable to ISO insert of R6 RPMT1204 of mostly brands this is 5 pocket cutter for finishing purpose     
Sold out -50% sale
Mars-Tech 40 MM Bull Nose Extra long 350 MM In 32 Mm Shank - 3 Pocket Suitable To RPMT1204 /R6 ₹ 3,900.00 ₹ 7,800.00
EMRW-C32-6R40-350L-3T  This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT1204/RDKW1204,R6 OF mostly brand into this , Suggested insert RPMT1204 OF Tabikut Brand.
-50% sale
Mars-Tech 50 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT10T3 R5 Of Mostly Brand ₹ 850.00 ₹ 1,700.00
EMRT-5R-50-22-4T SUITABLE TO R5 RPMT10T3  This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT10T3/RPKT10T3/R5 OF mostly brand into this ,   please note this  10T3 Thickness is 3.87 mm and RPMW1003 thickness is 3.18 mm and 10T3 have design on it. also a picture to check both types. 
sale
Mars-Tech 32 MM Bull Nose in 25 mm Shank - 2 pocket suitable to RPMT1204 /R6 from ₹ 1,200.00 ₹ 2,400.00
EMRW-25-6R32-200L-2T , EMRW-C25-6R32-250L-2T This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT1204/RDKW1204,R6 OF mostly brand into this , Suggested insert RPMT1204 OF Tabikut Brand.

GST Input Credit

Get Business Invoice and get 100% GST Input Credit for your Order.

7-Day Return

If you dont like the Product, Return it within 7 Days and get 100% refund.

Lowest Prices

We are offering Products at Lowest Prices in the Industry*.

Highest Quality

We strive to provide best quality product .