Inserted Endmill

sale

16mm Indexable Inserted Endmill 2 Pocket Suitable To APMT1135, Choose different size from variation

Mars-Tech 16mm Indexable Inserted Endmill 2 Pocket Suitable To APMT1135, Choose different size from variation from ₹ 500.00 ₹ 1,000.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of APMT1135 into this Different Lengths and Different Shank size please choose before adding to cart

sale

20 mm Indexable Inserted Endmill Dia 20mm Shank19/20 mm 2 Pocket Suitable To APMT1135

Mars-Tech 20 mm Indexable Inserted Endmill Dia 20mm Shank19/20 mm 2 Pocket Suitable To APMT1135 from ₹ 750.00 ₹ 1,600.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of APMT1135 into this Different Lengths and Different Shank size please choose before adding to cart

sale

12 mm Indexable Inserted Endmill BAP300R-C12-12-130-1T Suitable To APMT1135

Mars-Tech 12 mm Indexable Inserted Endmill BAP300R-C12-12-130-1T Suitable To APMT1135 from ₹ 510.00 ₹ 880.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of APMT1135 into this

sale

10 mm 1 pocket Indexable Inserted Endmill Dia 10 Suitable to APMT1135

Mars-Tech 10 mm 1 pocket Indexable Inserted Endmill Dia 10 Suitable to APMT1135 from ₹ 499.00 ₹ 800.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of APMT1135 into this

sale

25 mm Indexable Inserted Endmill Shank25 Mm 3 Pocket Suitable To APMT1135

Mars-Tech 25 mm Indexable Inserted Endmill Shank25 Mm 3 Pocket Suitable To APMT1135 from ₹ 1,000.00 ₹ 2,000.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of APMT1135 into this Different Lengths and Different Shank size please choose before adding to cart

32 mm Indexable Inserted Endmill Dia 32 mm 3 Pocket Suitable To APMT1604

Mars-Tech 32 mm Indexable Inserted Endmill Dia 32 mm 3 Pocket Suitable To APMT1604 from ₹ 1,100.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of APMT1135 into this Different Lengths and Different Shank size please choose before adding to cart BELOW IS A VIDEO FOR VIEW OF PRODUCT QUALITY AND BASIC DETAILS.

25 mm Indexable Inserted Endmill Shank25 Mm 2 Pocket Suitable To APMT1604 pack of 1

Mars-Tech 25 mm Indexable Inserted Endmill Shank25 Mm 2 Pocket Suitable To APMT1604 pack of 1 from ₹ 900.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of APMT1604 into this Different Lengths and Different Shank size please choose before adding to cart

-50% sale

Mars-Tech BAP400R-50-22-4T Face Milling Cutter Dia 50 Modular Type Suitable To APMT1604 Insert Bull Cutter ₹ 1,000.00 ₹ 2,000.00

Dia 50 cutter for APMT1604 insert , facemill cutter 50 mm apmt1604 Shank Holder FMB-22 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use APMT1604 Of Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert. HAVE A VIDEO VIEW BELOW WITH BASIC DETAILS

-42% sale

Mars-Tech 14 mm Indexable Inserted Endmill marstech Bap300r-c14-14-150-2T Suitable To APMT1135 pack of 1 ₹ 700.00 ₹ 1,200.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of APMT1135 into this

-50% sale

Mars-Tech BAP400R-63-22-4T Face Milling Cutter Dia 63 Modular Type Suitable To APMT1604 Insert Bull Cutter ₹ 1,200.00 ₹ 2,400.00

Dia 63 cutter for APMT1604 insert , facemill cutter 63 mm apmt1604 Shank Holder FMB-22 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use APMT1604 Of Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

sale

22 mm Indexable Inserted Endmill Shank 20 dia 22 Mm 2/3 pockets Suitable To APMT1135

Mars-Tech 22 mm Indexable Inserted Endmill Shank 20 dia 22 Mm 2/3 pockets Suitable To APMT1135 from ₹ 950.00 ₹ 1,900.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of APMT1135 into this

sale

18 mm marstech Indexable Inserted Endmill Shank 16mm 2 Pocket Suitable To APMT1135 pack of 1

Mars-Tech 18 mm marstech Indexable Inserted Endmill Shank 16mm 2 Pocket Suitable To APMT1135 pack of 1 from ₹ 836.00 ₹ 1,540.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of APMT1135 into this HAVE A DETAIL VIEW HERE https://www.youtube.com/watch?v=2wx3B5AEQI0 Different Lengths and Different Shank size please choose before adding to cart

sale

Mars-Tech JDMT07 Milling cutter small diameter for Dia 12 and 14 mm suitablet to JDMT0702 Hitachi Brand Insert. from ₹ 1,500.00 ₹ 3,000.00

ESE-C10-10-100L-2T SCREW 1.8X4 MM T6 KEY ESE-C12-12-120L-2T SCREW 1.8X4 MM T6 KEY ESE-C14-14-150L-3T SCREW 1.8X4 MM T6 KEY This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use JDMT070204 For HITACHI Brand Insert into this , If any other brand have same insert can also fix to this cutter body

-36% sale

Mars-Tech BAP400R-80-27-6T Face Milling Cutter Dia 80 Modular Type Suitable To APMT11604 Insert Bull Cutter ₹ 1,920.00 ₹ 3,000.00

Dia 80 cutter for APMT1604 insert , facemill cutter 80 mm apmt1604 Shank Holder FMB-27 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use APMT1604 Of Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

sale

40 MM Indexable Inserted Endmill Shank 32 Mm 3 Pocket Suitable To APMT1604

Mars-Tech 40 MM Indexable Inserted Endmill Shank 32 Mm 3 Pocket Suitable To APMT1604 from ₹ 1,500.00 ₹ 2,500.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of APMT1604 into this Different Lengths and Different Shank size please choose before adding to cart HAVE A CLEAR VIEW OF PRODUCT ON VIDEO BELOW

Sold out -24% sale

SDMT1204 Milling Cutter dia 80 mm suitable to Widia Insert pack of 1

Mars-Tech SDMT1204 Milling Cutter dia 80 mm suitable to Widia Insert pack of 1 ₹ 2,520.00 ₹ 3,300.00

SDMT1204 WIDIA milling cutter body dia 80 6 pockets 27 mm hole. This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use SDMT1204 Of WIDIA and Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

-50% sale

Mars-Tech BAP400R-100-32-6T Face Milling Cutter Dia 100 Modular Type Suitable To APMT11604 Insert face Cutter ₹ 2,400.00 ₹ 4,800.00

Dia 100 cutter for APMT1604 insert , facemill cutter 100 mm apmt1604 Shank Holder FMB-32 BAP400R-100-32-6T EAP400R-100-32-6T, 400R-100-32-6T This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use APMT1604 Of Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

-63% sale

BAP300R-50-22-6T Face Milling Cutter Dia 50 Modular Type Suitable To APMT1135 Insert Bull Cutter

Mars-Tech BAP300R-50-22-6T Face Milling Cutter Dia 50 Modular Type Suitable To APMT1135 Insert Bull Cutter ₹ 1,850.00 ₹ 5,000.00

Dia 50 cutter for APMT1135 insert , facemill cutter 50 mm apmt1135 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use APMT1135 Of Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert. HAVE A VIEW ON VIDEO FOR BASIC DETAILS

-38% sale

Mars-Tech 32 mm Indexable Inserted Endmill Dia 4 Pocket Suitable To APMT1135 ₹ 1,875.00 ₹ 3,000.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of APMT1135 into this Different Lengths and Different Shank size please choose before adding to cart

-50% sale

Mars-Tech Indexable Inserted Endmill Dia 16 Mm Shank 16 Mm 2 Pocket Suitable To AOMT123608 For Mitsubishi Insert ₹ 1,000.00 ₹ 2,000.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use AOMT123608 For Mitsubishi Brand Insert into this , If any other brand have same insert it can also fixed to this.

Find anything you need

Inserted Endmill

GST Input Credit

7-Day Return

Lowest Prices

Highest Quality