Back to all products
BT30 HOLDER
All products
5 & 6 Flute Endmills
Accessories
Accessories APP
Accessories APP 2
All
Ballnose (45 HRC)
Ballnose (55 HRC)
Ballnose (60 HRC)
Ballnose (65 HRC)
Ballnose (65 HRC)
Ballnose (Inserted)
Ballnose - 45 HRC
Ballnose - 55 HRC
Ballnose - 55 HRC 1
Ballnose - 60 HRC
Ballnose - 60 HRC 1
Ballnose 4 Flute (55HRC)
BBT40 Holders
Boring Heads
BPT
BT-30 Type
BT-40 BCA
BT-40 Type
Carbide Cutters
Carbide Cutters
Carbide Drills
CARBIDE15
CBN Inserts
Ceramic
Ceratizit
Cermet
Chamfer Cutter
Chamfering
Collet Chucks
Collet Chuks
Collet ER Types
Collets - ER Type
Corner Radius Endmill
Cutters High Feed
Cylindrical Chuks
Cylndrical Chuck
Dasqua
Deal of the Day
Deskar
Dijet
Drill Chuck - Keyless
Drilling Insert
Duracarb
Edge Finders
Endmill (3 Flute) DLC
Endmill (45 HRC)
Endmill (55 HRC) 1
Endmill (60 HRC)
Endmill (65 HRC)
Endmill (Inserted)
Endmill - 45 HRC
Endmill - 55 HRC
Endmill - 55 HRC 1
Endmill - 60 HRC
Endmill - 60 HRC 1
Endmill 2 Flute
Endmill Ballnose - Micro
ER Collets
ER Nuts
ER Spanners
ER Tap Collets
Find the Edge
Gauges
Grooving Inserts
Grooving Work
Heads - Boring
High Feed
Hitachi
HRC63(Nano Coated)
Indexable Cutters
Inserted Ballnose
Inserted Cutters
Inserted Endmill
Inserts
INSERTS15
ISO40 Holders
Jaibros
JXD
Keyless Drill Chuck
Knob - Pull Studs
Knob- Pull Studs
Korloy
Korloy
Kyocera
Life
Locking Device
Long Neck Cutters
Mars-Tech
Measurings
Metrology
Micro Drills
Micro Endmill Ballnose
Milling Inserts
Milling Opertations
Miscellaneous
Mitsubishi
Multifunction Tools
Non Standard Endmills
Non-Ferrous
Nuts - ER
Nuts ER
PCD Inserts
Promo Inserts
Pull Studs
Rougher Endmills
Single Flute Endmill
SK-40 Type
Spanner - ER
Spanners - ER
Straight Shank Chucks
Tabikut
Tabikut Inserts
TaeguTec
Threading Application
Threading Inserts
Tool Boy
Tools Boy
Torx Keys
Torx Screws
TURNING
Turning Holders
Turning Inserts
Turning Usage
U Drill
Uncoated End & Ball
volume discount
Wholesale Deals
Widia
Yuzuki
Z Setter
ZCCCT
Zero Pre Setter
Zero Setter
Mars-Tech
BT30 Er11a-70l,100l Er Coll...
₹ 1,505.00
BT30 Er11a-70l,100l Er Collet Chuck
BT30 Tool Holder accepts all ER11 colletsThread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micronAll critical tool holder surfaces precision groundCoolant through capabilityGage length is 70mm
Rear thread for pull stud is M12 X 1.75
All holders have capability to become through coolant by simply removing screw in the center by allen key
Mars-Tech
BT30 Er20a-70L,100L Er Coll...
₹ 1,505.00
BT30 Er20a-70L,100L Er Collet ChuckBT30 Tool Holder accepts all ER20 collets
ER20 Collets range from 1 mm to 14 mm The thread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundCoolant through capabilityThe gage length is 70mm,100MMRear thread for the pull stud is M12X1.75
Mars-Tech
BT30 ER25UM-70L,100L ER Col...
₹ 1,505.00
BT30 ER25UM-70L,100L ER Collet Chuck
BT30 Tool Holder accepts all ER25 collets
ER25 Collets range from 1 mm to 16 mm The thread inside the internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundCoolant through capabilityThe gage length is 70mm,100MMThe rear thread for the pull stud is M12 X 1.75
All holders have the capability to become through coolant by simply removing the screw in the center with allen key
Mars-Tech
BT30 Er32 Um-70l,100l,150l ...
from ₹ 1,324.00
BT30 Er32 Um-70l,100l,150l Er Collet ChuckBT30 Tool Holder accepts all ER32 collets
ER32 Collets range from 1 mm to 20 mm The thread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundCoolant through capabilityThe gage length is 70mm,100MM,150MMThe rear thread for the pull stud is M12 X 1.75
All holders have the capability to become through coolant by simply removing screw in the center with allen key
Mars-Tech
BT30 FMB 22 mm Face Milling...
₹ 1,505.00
BT30 FMB 22 mm Face Milling Holder ArbourBT30 facemill holder also called facemill arbour and facemill adaptor
BT30 FMA22 Is mainly used to hold Modular Indexable Cutter with Internal hole of 16 mm any cutter can come with a 22 mm Internal thread but normally 50 mm AND 63 mm Cutters are common in this range.
Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundGage length is 45MM,90MMRear thread for pull stud is M12 X 1.75
Mars-Tech
BT30 FMB 27 Face Milling Ho...
₹ 1,505.00
BT30 FMB 27 Face Milling Holder ArbourBT30 face mill holder also called face mill arbour and face mill adaptor
BT30 FMA27 Is mainly used to hold Modular Indexable Cutters with Internal hole of 16 mm any cutter can come with a 27 mm Internal thread but normally 80 mm AND 100 mm Cutters are common in this range.
Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundGage length is 45MM,90MMRear thread for pull stud is M12 X 1.75
Mars-Tech
BT30 FMB 32 face milling Ho...
₹ 1,505.00
BT30 FMB 32 face milling Holder ArbourBT30 face mill holder also called face mill arbour and face mill adaptor
BT30 FMA32 Is mainly used to hold Modular Indexable Cutter with an Internal hole of 16 mm any cutter can come with a 32 mm Internal thread but normally 100 mm AND 125 mm Cutters are common in this range.
Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundGage length is 60MMRear thread for pull stud is M12X1.75
Mars-Tech
BT30 JT6 Adaptor Holder for...
₹ 1,505.00
BT30 JT6 Adaptor Holder for JT6 ArbourBT30 JT6 holders are mainly used to hold JT6 Female Taper , This holder have JT6 Male taper if anything like drill chuck have internal taper of JT6 so it can hold it easily with rigidity.
Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundRear thread for pull stud is M12X 1.75
Mars-Tech
BT30 Morse Taper Adaptor MT...
₹ 1,505.00
BT30 Morse Taper Adaptor MT Holder MT1 MT2 MT3BT30 Morse Taper holder are used to hold Tang type shanks
BT30 morse taper Is mainly used to hold Tang Type Drills and Arbours
Better shank taper - accurate, rigid toolholder-to-spindle mount
Less tool wear and replacement - less scrap
Fully ground flange and V-groove, easy on the tool changers for less spindle and changer maintenance
Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundRear thread for pull stud is M12 X 1.75
Mars-Tech
BT30 Side Lock Adaptor , SL...
₹ 1,505.00
BT30 Side Lock Adaptor, SLA 10,12,16,20,25,32 mm For Cylindrical ShankBT30 SLA holder also called SIDE LOCK HOLDER
BT30 SIDE LOCK Is mainly used to hold a Cylindrical/Straight Shank of anything like an Indexable Cutter , Baby chuck, or Carbide Drill whatever a straight shank can hold for better rigidity and strength range from 16 mm to 32 mm as the small diameter of the shank can be held in a standard collet chuck.
Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundGage length is 50MM,63MM,80MM,90MMThe rear thread for the pull stud is M12 X 1.75
Mars-Tech
BT30ER16A-70L,100L, ER Coll...
₹ 1,505.00
BT30ER16A-70L,100L, ER Collet ChuckBT30 Tool Holder accepts all ER16 collets
ER16 Collets range from 1 mm to 12 mm Thread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundCoolant through capabilityGage length is 70mm,100MM
Rear thread for pull stud is M12 X1.75
All holders have capability to become through coolant by simply removing screw in the center by allen key
Mars-Tech
BT30FMB 16 Face Milling Hol...
₹ 1,505.00
BT30FMB 16 Face Milling Holder Arbour FMA16BT30 face mill holder also called face mill arbour and facemill adaptor
BT30 FMA16 Is mainly used to hold Modular Indexable Cutter with Internal hole of 16 mm any cutter can come with a 16 mm Internal thread but normally 40 mm Cutters are common in this range.
Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundGage length is 40mm,80MMRear thread for pull stud is M12 X 1.75