Shank Type Cutter

10 mm 1 pocket Indexable Inserted Endmill Dia 10 Suitable to APMT1135

10 mm 1 pocket Indexable Inserted Endmill

Mars-Tech 10 mm 1 pocket Indexable In... from ₹ 635.00

This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1135 into this

NICE CUTT 10/12 mm cutter suitable to... ₹ 2,166.00

10/12 mm cutter is suitable for JDMT07 Hitachi Brand Insert. pack of 1NICE CUTT BRAND ESE-C10-10-100L-2T SCREW 1.8X4 MM T6 KEY ESE-C12-12-120L-2T SCREW 1.8X4 MM T6 KEY This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use JDMT070204 For HITACHI Brand Insert into this If any other brand have same insert can also fix to this cutter body

Mars-Tech 12 mm Indexable Inserted En... from ₹ 662.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of APMT1135 into this

14 mm Indexable Endmill Suitable 150 mm long To APMT1135 pack of 1

Mars-Tech 14 mm Indexable Endmill Sui... ₹ 963.00

This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1135 into this

16 mm ballnose T2139 C16-8R-150/200 Length inserted ballnose suitable to walter insert pack of 1

Mars-Tech 16 mm ballnose T2139 C16-8R... from ₹ 2,407.00

This is inserted ballnose suitable to only Walter brand insert with an R8 radius please check your insert before buying. Insert are not included with the order you need to buy it separately. 150 and 200 Length please check in variation

16 mm cutter LNMU0303 - 150 And 200 Long Suitable To LNMU0303 Inserts pack of 1

Mars-Tech 16 mm cutter LNMU0303 - 150... ₹ 1,926.00

EXN03-C16-16-150L-2T , EXN03-C16-16-200L-2T This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use LNMU0303 Tungaloy Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Mars-Tech 16 mm ZCMT10 Insert cutter ... ₹ 1,444.00

16 mm ZCMT10 Insert cutter 200 mm long pack of 1SICL 1610S16-2N-150L SICL 2010S20-2N-200L SICL 2510S25-3N-200L This is a Shoulder & Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, this cutter is suitable to ZCMT1003 from DIJET brand. If any other brand has the same insert you can use it for this cutter.

16mm cutter 2 pocket Suitable To APMT1135 Pack of 10

Mars-Tech 16mm cutter 2 pocket Suitab... from ₹ 4,720.00

This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1135 into this. Different Lengths and Different Shank size please choose before adding to cart

sale

Mars-Tech 16mm cutter 2 pocket Suitab... from ₹ 662.00 ₹ 3,000.00

This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1135 into this. Different Lengths and Different Shank size please choose before adding to cart

Mars-Tech 16mm inserted ballnose for ... ₹ 1,204.00

EMRT-C16-4R16-200L THERE ARE 2 TYPES IF YOU NEED 0803 PLEASE CHECK THE THICKNESS OF THE INSERT 08T2 HAS A THICKNESS OF 2.78 MM ( CHIP BREAKER SURFACE) 0803 HAS A THICKNESS OF 3.18 MM ( PLAIN SURFACE) This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of RPMW08T2/RDKW08T2/0803/R4 OF mostly brand into this.

18 mm mars-tech Indexable Inserted Endmill

Mars-Tech 18 mm Inserted Endmill Shan... from ₹ 1,079.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of APMT1135 into this HAVE A DETAIL VIEW HERE https://www.youtube.com/watch?v=2wx3B5AEQI0 Different Lengths and Different Shank size please choose before adding to cart

20 mm ballnose T2139 C20-10R-150/200 Length inserted ballnose suitable to Walter insert pack of 1

Mars-Tech 20 mm ballnose T2139 C20-10... from ₹ 2,407.00

This is inserted ballnose suitable to only Walter brand insert with an R10 radius please check your insert before buying. Insert are not included with the order you need to buy it separately. 150 and 200 Length please check in variation

Mars-Tech 20 mm Indexable Inserted En... ₹ 1,444.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use JDMT1003 from Hitachi Brand Insert into this , If any other brand have same insert it can also fixed to this.

Mars-Tech 20 mm Indexable Inserted En... from ₹ 1,083.00

This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1135 into this Different Lengths and Different Shank sizes please choose before adding to the cart

Mars-Tech 20 mm ZCMT10 Insert cutter ... ₹ 1,805.00

NOTE: 16mm has 2 pockets. Product Description SICL 1610S16-2N-150L SICL 2010S20-2N-200L SICL 2510S25-3N-200L This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, this cutter is suitable to ZCMT1003 from DIJET brand. If any other brand has the same insert you can use it for this cutter.

Mars-Tech 22 mm Indexable Inserted En... from ₹ 1,143.00

This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machi with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1135 into this

25 mm Indexable Inserted Endmill shank 25 mm

Mars-Tech 25 mm Indexable Endmill Sha... from ₹ 1,264.00

25 mm Indexable Endmill Shank25 Mm 2 Pocket Suitable To APMT1604This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1604 into this Different Lengths and Different Shank sizes please choose before adding to the cart

Mars-Tech 25 mm Indexable Inserted En... from ₹ 1,264.00

This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC not to wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1135 into this Different Lengths and Different Shank sizes please choose before adding to the cart

Mars-Tech 25 mm ZCMT10 Insert cutter ... ₹ 2,166.00

25 mm ZCMT10 Insert cutter 200 mm long pack of 1Note: 25 MM body has 3 Pockets. Product Description SICL 1610S16-2N-150L SICL 2010S20-2N-200L SICL 2510S25-3N-200L This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC not to wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides,this cutter is suitable to ZCMT1003 from DIJET brand. If any other brand have same insert you can use for this cutter.

Mars-Tech 25mm aomt184808 2 Pocket Mi... ₹ 1,866.00

25mm aomt184808 2 Pocket Mitsubishi Insert pack of 1This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS and changing of insert time is also very low, They are hardened 45-50 HRC not to wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use AOMT184808 For Mitsubishi Brand Insert into this , If any other brand have same insert it can also fixed to this.

Get Extra 1% Discount on Jaibros App only

Find anything you need

Shank Type Cutter

GST Input Credit

7-Day Return

Lowest Prices

Highest Quality