Mars-Tech

Mars-Tech 32mm R6 bull nose- 2 Pocket... from ₹ 2,277.00

32 MM Bull Nose In 32 mm Shank - 2 Pocket Suitable To RPMT1204 /R6EMRW-C32-6R32-200L-2T , EMRW-C32-6R32-250L-2T This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of RPMT1204/RDKW1204, R6 OF mostly brand into this, Suggested insert RPMT1204 OF Tabikut Brand.

Mars-Tech 3D TEST FINDER FOR all 3 ax... ₹ 49,560.00

3D TEST FINDER FOR all 3-axis Germany make 12mm shank pack of 1Made in Germany 3D tester for all 3-axis connect with us to know more about the product guarantee and usability it can save lots of time to take offset and many more features. https://www.youtube.com/watch?v=T1vXCwSBZWs Benefits- Ultra-slim design.- Waterproof: IP67- Robust & non-magnetic probe tips- Operates in the X, Y, and Z directions at the same time- Quick and easy to adjust thanks to new alignment technology- Mechanical end stops to protect the measurement unitApplicationIts precise and varied applications enable quick and simple identification of workpiece zero points and length dimensions. As soon as the indicators show "0", the spindle axis is located precisely on the workpiece edge.

3MM MGMN Grooving Holder suitable to MGMN Korloy Insert 3 mm left and right pack of 1

Mars-Tech 3MM MGMN Grooving Holder su... ₹ 1,003.00

3MM MGMN Grooving Holder suitable to MGMN Korloy Insert 3 mm left and a right pack of 1Grooving holders are used for parting and grooving in the turning machine. 3 mm grooving holder suitable to KORLOY profile of insert it can fit to any insert naming MGMN 2 mm T max is the maximum grooving capacity of the holder if the grooving capacity is 19 mm it means it can part 38 mm of the round bar maximum.

3mm tdc tdt tdj Grooving Taegutec Insert 3 mm Left/Right pack of 1

Mars-Tech 3mm tdc tdt tdj Grooving Ta... from ₹ 944.00

3mm tdc Grooving Holder suitable to Taegutec Insert 3 mm Left/Right HANDGrooving holders are used for parting and grooving in the turning machine. 3 mm grooving holder suitable to taegutech profile of insert it can fit to any insert naming TDC TDJ TDT 3 mm T max is the maximum grooving capacity of the holder if the grooving capacity is 19 mm it means it can part 38 mm of the round bar maximum.

40 mm Bull Nose modular R5 and R6 pack of 1

Mars-Tech 40 mm Bull Nose modular R5 ... ₹ 1,888.00

40 MM Bull Nose RPMT10t3 /1204EMRW-40-22-3T- R5 OR R6 This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC not to wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of RPMT1204/RDKW1204, R6 OF mostly brand into this, Suggested insert RPMT1204 OF Tabikut Brand.

40 MM Indexable Inserted Endmill | APMT1604 insert

Mars-Tech 40 MM Indexable Inserted En... from ₹ 1,805.00

40 MM Indexable Inserted Endmill Shank 32 Mm 3 Pocket Suitable To APMT1604This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of APMT1604 into this Different Lengths and Different Shank size please choose before adding to cart HAVE A CLEAR VIEW OF PRODUCT ON VIDEO BELOW

4mm MGMN Grooving Holder suitable to MGMN400 pack of 1

Mars-Tech 4mm MGMN Grooving Holder su... ₹ 1,003.00

4MM MGMN Grooving Holder suitable to MGMN400 MRMN400Grooving holder are used for parting and grooving in turning machine. 4 mm grooving holder suitable to KORLOY profile of insert it can fit to any insert naming MGMN 2 mm T max is maximum grooving capacity of holder if grooving capacity is 20 mm it means it can part 40 mm of round bar maximum.

4mm TDC,TDJ,TDT Grooving Holder suitable to Taegutec Insert 4 mm LEFT/RIGHT HAND

Mars-Tech 4mm TDC,TDJ,TDT Grooving Ho... ₹ 1,003.00

4mm TDC Grooving Holder suitable to Taegutec Insert 4 mm LEFT/RIGHT HANDGrooving holders are used for parting and grooving in the turning machine. 4 mm grooving holder suitable to taegutech profile of insert it can fit to any insert naming TDC TDJ TDT 3 mm T max is the maximum grooving capacity of the holder if the grooving capacity is 20 mm it means it can part 40 mm of the round bar maximum.

Mars-Tech 5 SPANNERS MIS AND ISO25/20... ₹ 1,650.00

5 pcs of SPANNERS ISO25 - 1 QTY ISO20- 1 QTY C TYPE 38-42 - 1 QTY ER20MS -1 QTY ER11MS-1 QTY . DEALS ARE NOT RETURNABLE OR EXCHANGEABLE

50 Mm Bull Cutter For Die And Mould | RPMT10T3

Mars-Tech 50 -R5-10T3 Mm Bull Cutter ... ₹ 1,505.00

FOR TECHNICAL DETAILS GO TO SECOND IMAGE OF PRODUCT EMRT-5R-50-22-4T SUITABLE TO R5 RPMT10T3 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT10T3/RPKT10T3/R5 OF mostly brand into this , please note this 10T3 Thickness is 3.87 mm and RPMW1003 thickness is 3.18 mm and 10T3 have design on it. also a picture to check both types.

50 mm Apmt1135 other edge 75 degree insert cutter pack of 1

Mars-Tech 50 mm Apmt1135 other edge 7... ₹ 1,750.00

50 mm Apmt1135 other edge insert 75 degree 4 pocket Dia 50- 4 pocket cutter for APMT135 insert , facemill cutter 50 mm apmt1135 Shank Holder FMB-22 This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use APMT1135 Of Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check the description of the size from other brands to fix this insert.

Mars-Tech 50 mm Apmt1604 other edge i... ₹ 2,166.00

75 DEGREE APMT1604 other edge cutter 3 pockets.Dia 50- 3 pocket cutter for APMT1604 insert , facemill cutter 50 mm apmt1604 Shank Holder FMB-22 This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use APMT1604 Of Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check the description of the size from other brands to fix this insert.

Mars-Tech 50 mm Bull cutter for die a... ₹ 1,204.00

50 mm Bull cutter for die and mould facing cutter suitable to RPMW1003 R5 of mostly brandEMRW-5R-50-22-4T SUITABLE TO R5 RPMW1003 This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use any ISO inserts of RPMW1003/RPKT1003/R5 OF mostly brand into this, please note this 10T3 Thickness is 3.87 mm and RPMW1003's thickness is 3.18 mm and 10T3 has a design on it. also, a picture to check both types.

Mars-Tech 50 Mm Bull Cutter For Die A... from ₹ 1,204.00

50 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT12T3 R6 Of Mostly BrandEMRW-6R-50-22-4T suitable to R6 12T3 insert This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts Or DIJETof RDMT12T3 RPMT12T3/RDKW12T2/R6 OF mostly brand into this , Recommended Suitable insert for this cutter is TABIKUT Carbide Insert

Mars-Tech 50 Mm Bull Cutter Suitable ... ₹ 1,444.00

50 Mm Bull Cutter Suitable To RDMT1604 MOTN HITACHI BRANDTRS-8R-50-22-3T suitable to RDMT1604 MO TN Hitachi Insert This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use RDMT1604 MOT TN HITACHI BRAND INSERT ONLY

Mars-Tech 50 mm cutter RPMW1003 pack ... ₹ 1,000.00

EMRW6R-50-22-4T suitable to RPMW1003 insert please check images carefully DEALS ARE NOT EXCHANGEABLE NOR RETURNABLE

Sold out

Mars-Tech 50 mm roughing cutter modul... ₹ 11,795.00

50 mm roughing cutter modular type suitable to apmt1604This is Helical Cutter also called a rougher cutter it has more pockets used for milling operation for roughing or plunging which saves time used in roughing operation also This is a 50 mm modular cutter please read the details before ordering BAP400R-50-22-60M-3T-15P Suitable Insert - APMT1604 Shank Diameter for holding - 22 mm fmb holder for holding with the extra long screw you need to purchase extra, you can easily get from a local shop. Cutter Diameter- 50 mm Cutting length Helical length - 60 mm Total Length - 100 mm 3 Pocket - 15 inserts will fit in one time

Sold out

50 mm SDMT1204 Milling Cutter suitable to Widia Insert M690 series pack of 1

Mars-Tech 50 mm SDMT1204 Milling Cutt... ₹ 2,021.00

50 mm SDMT1204 Milling Cutter suitable to Widia Insert M690 series pack of 1SDMT1204 WIDIA milling cutter body dia 50 4 pockets 22 mm hole. This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use SDMT1204 Of WIDIA and Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check descriptions of sizes from other brands to fix this insert.

Mars-Tech 50 mm sdmt1205 High feed cu... ₹ 2,166.00

50 mm sdmt1205 High feed cutter suitable to tabikut Deskar Gesac brandASRF12-50-22-4T , ASRF12-63-22-4T This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use SDMT1205 Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check descriptions of sizes from other brands to fix this insert.

Mars-Tech 50 mm SNMX1206 cutter inser... ₹ 4,754.00

50 mm SNMX1206 cutter insert face mill in 45 degrees and 88 degrees suitable to KORLOY BrandSNMX1206 Facemill Cutter, indexable cutter body RM8 series 8 edges insert cutter body for dia 50,63, and 80 mm in 45-degree and 88 degree This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use SNMX1206 Of Korloy and Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check descriptions of sizes from other brands to fix this insert.