All

Tabikut 2 flute 6 mm cutter 45/55 h... from ₹ 270.00

6 mm 2 flute endmill used for 50/75/100/150mm long metal and wood

JAIBROS thickness gage feeler gauge 13/20/26 blades stainless steel white finish pack of 1

Jaibros JAIBROS thickness gage feel... from ₹ 299.00

CHOOSE BLADES FROM VARIATION Made of stainless steel 13/20/26 blades feeler gauge Taper size blades of 4 inches. Made In India A feeler gauge is a tool used to measure gap widths. Feeler gauges are mostly used in engineering to measure the clearance between two parts. They consist of a number of small lengths of steel of different thicknesses with measurements marked on each piece. They are flexible enough that, even if they are all on the same hinge, several can be stacked together to gauge intermediate values. It is common to have two sets for imperial units typically measured in thousandths of an inch and metric measurements. Manufactured using high carbon steel and chrome vanadium steel for strength, durability and resistance to corrosion. This master feeler gauge is constructed of durable harden steel that won t wear down over time. It's 26 blades provide accurate measurement of clearances. Each blade has easy to read etched markings. Every blade with its thickness clearly on it, easy to select.

Mars-Tech 20 MM Bull Cutter Suitable ... ₹ 1,143.00

20 MM Bull Cutter Suitable To RPMT10T3 R5 Insert 200 mm long pack of 1This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of RPMT10T3/RDKW10T3/R5 OF mostly brand into this.

16 ER/IR AG60 External/Internal Threading CRM carbide Insert pack of 10

CRM 16 ER/IR AG60 External/Inte... ₹ 2,242.00

SELECT EXTERNAL OR INTERNAL CAREFULLY. CRM EXTERNAL HAS YELLOW BOX AND INTERNAL HAS BLUE BOX High profile accuracy. Parameters are mentioned on the Box back side suitable to mostly steel grade , stainless steel grade Prevents chip curling, thus less tool breakage.

Tabikut APMT1604 T15H grade Carbide... ₹ 1,239.00

APMT1604 T15H grade Carbide Insert Tabikut pack of 10APMT1604 T15H . T15H Grade is for general machining steel stainless steel Forging etc. Carbide inserts for Steel and Stainless Steel machining with or without coolant, are used in any suitable cutter for BAP400R, and this is used in milling machines mainly. Suitable cutter any cutter which suits the APMT1604 insert.For steel, mild steel, HRC upto 45-55 with and without coolantAPMT1604 for BAP400R cutters brown coatedSUITABLE TO ALL MILLING CUTTERS FOR APMT1604

50 mm Apmt1135 other edge 75 degree insert cutter pack of 1

Mars-Tech 50 mm Apmt1135 other edge 7... ₹ 1,750.00

50 mm Apmt1135 other edge insert 75 degree 4 pocket Dia 50- 4 pocket cutter for APMT135 insert , facemill cutter 50 mm apmt1135 Shank Holder FMB-22 This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use APMT1135 Of Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check the description of the size from other brands to fix this insert.

3 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1

Tabikut 3 mm Carbide Endmill 65 HRC... from ₹ 584.00

3 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1check 2nd image for dimensions 65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size. Helix Angel of 35 degrees, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM 4 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns

TPGH090202/04L T20 steel and stainless steel grade pack of 10

Tabikut TPGH090202/04L T20 steel an... ₹ 1,912.00

TPGH090202/04L T20 grade is for steel and stainless steel can also work on cast iron used in mostly fine boring heads

5 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1

Tabikut 5 mm Carbide Endmill 65 HRC... from ₹ 991.00

5 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1check 2nd image for dimensions 65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size. Helix Angel of 35 degrees, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM 4 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns

4 mm Carbide Endmill 50/75/100 LONG 65 HRC 4 Flutes PACK OF 1

Tabikut 4 mm Carbide Endmill 50/75/... from ₹ 584.00

4 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1check 2nd image for dimensions 65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size. Helix Angel of 35 degree, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM 4 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns

6 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1

Tabikut 6 mm Carbide Endmill 65 HRC... from ₹ 991.00

6 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1check 2nd image for dimensions 65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size. Helix Angel of 35 degree, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM 4 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns

ENMX1206T3 GM Carbide Insert ZCCCT YBD9320 Grade pack of 10

ZCCCT ENMX1206T3 GM Carbide Inser... ₹ 1,888.00

THIS IS EQUAL TO LNMU0303 HIGH FEED MILLING INSERTS WITH 4 CUTTING EDGES Carbide insert for Steel and Stainless Steel machining with or without coolant , used in any suitable cutter for LNMU and this is used in milling machine mainly. Suitable cutter any cutter which suits LNMU0303 insert.

MR WIDIA CCMT09T304/08 MRT2 MR2500T PACK OF 10

WIDIA MR WIDIA CCMT09T304/08 MRT2... ₹ 1,345.00

CCMT09T304/08 MRT2 MR2500P carbide insert MR2500 grade is used for general steel and stainless steel Make In India product.

Dasqua Vernier Caliper Manual (Monoblock) pack of 1

Dasqua Dasqua Vernier Caliper Manu... from ₹ 1,656.00

Strictly made in accordance with DIN862Hardened Ground and lapped Measuring SurfacesSilky Smooth Movement ThroughoutSolid Stainless Steel ConstructionDistinct Lines and Figures agains the Satin Chrome Finish make reading easy4 way measurement jaws for outside , inside , depth and step measurement0 – 150 mm , 0 – 6 ” Graduation 0.05mm / 1/128″Jaw Length 50 mm

SPGT060204 CH T15 drilling insert for ss and steel grade pack of 10

Tabikut SPGT060204 CH T15 drilling ... ₹ 2,124.00

This SPGT insert is equivalent to SPMG this one is with chip breaker and better compatible with stainless steel This is multi-grade used for all kinds of material. SPMG060204 suitable to 15.5MM, 16MM, 16.5MM, 17MM, 17.5MM, 18MM, 18.5MM, 19MM, 19.5MM, 20MM, 20.5MM, 21MM, 21.5MM u drills LD 2, 3, 4, 5 Cutting speed Vc 150-220 m/min, feed 0.05-0.12, This is for the general purpose you need to make hit and trial suitable to your material.

APMT160430 T20 Carbide Insert 3 mm radius TABIKUT Insert apmt16

Tabikut APMT160430 T20 Carbide Inse... ₹ 2,360.00

3MM RADIUS INSERT WE SELL ORIGINAL INSERTS ONLY APMT160430 T20 grade T20 Grade is for general soft machining and Carbide insert for Steel and Stainless Steel machining with or without coolant , used in any suitable cutter for BAP400R and this is used in milling machine mainly. Suitable cutter any cutter which suits APMT1604 insert.For steel , mild steel , hrc upto 45-55 with and without coolantAPMT1604 for BAP400R cutters brown coatedSUITABLE TO ALL MILLING CUTTER FOR APMT1604

STFCL/R TCMT11 Boring Bar dia 10/12/16 pack of 1

Mars-Tech STFCL/R TCMT11 Boring Bar d... from ₹ 472.00

PLEASE CHECK 2ND IMAGE AND ANGEL BEFORE ORDERING. This boring bar comes in different angel which change the usage and application kindly check 2nd image of the product for technical details , spare details and angel degree

SPGT07T308 CH T15 drilling insert for ss and steel grade pack of 10

Tabikut SPGT07T308 CH T15 drilling ... ₹ 2,242.00

This SPGT insert is equivalent to SPMG this one is with chip breaker and better compatible with stainless steel SPGT07T308 U drill mostly range from 22mm,22.5MM,23MM,23.5MM,24MM,24.5MM,25MM,25.5MM,26MM,26.5MM,27MM, 27.5mm Cutting speed Vc 150-220 m/min , feed 0.05-0.12 this is general recommendation you need to do some trial to find out best suitable parameters. This is multi grade used on mostly all material

8 mm Carbide Endmill 65 HRC 4 Flutes LONG PACK OF 1

Tabikut 8 mm Carbide Endmill 65 HRC... from ₹ 1,617.00

8 mm Carbide Endmill 65 HRC 4 Flutes 8X60/100 LONG PACK OF 1check 2nd image for dimensions 65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size. Helix Angel of 35 degree, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM 4 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns

63mm Apmt1135 other edge 75 degree insert cutter pack of 1

Mars-Tech 63mm Apmt1135 other edge 75... ₹ 2,070.00

63 mm Apmt1135 other edge insert 75 degree 4 pocket Dia 63- 4 pocket cutter for APMT135 insert , facemill cutter 63 mm apmt1135 Shank Holder FMB-22 This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use APMT1135 Of Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check the description of the size from other brands to fix this insert.