All

Mechanical Ceramic Edge Finder ceramic 10x10 MM pack of 1

Mars-Tech Mechanical Ceramic Edge Fin... ₹ 1,023.00

ceramic edge finder for magnetic componenet as ceramic is non magnetic Mechanical Edge Finder also called touch point sensor are used for find Zero point of the workpiece and find center of the hole.

12 mm Carbide Endmill 65 HRC 4 Flutes LONG PACK OF 1

Tabikut 12 mm Carbide Endmill 65 HR... from ₹ 3,469.00

12 mm Carbide Endmill 65 HRC 4 Flutes 12X75 -12x100 LONG PACK OF 1check 2nd image for dimensions 65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size. Helix Angel of 35 degree, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM 4 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns

TPGH110302/04L T20 steel and stainless steel grade pack of 10

Tabikut TPGH110302/04L T20 steel an... ₹ 1,912.00

TPGH110302/04L T20 grade is for steel and stainless steel can also work on cast iron used in mostly fine boring heads

Step boring bar ccmt dia 8/12/16 pack of 1

Mars-Tech Step boring bar ccmt dia 8/... from ₹ 944.00

Step boring bar are also called reduce shank bar they have bigger size of shank for holding but machining part is reduce size 8 mm bar with 16 mm shank 10 mm bar with 16 mm shank 12 mm bar with 16 mm shank 16 mm bar with 20 mm shank

SCLCR -CCMT1204Turning Holder ccmt SCLCL/R pack of 1

Mars-Tech SCLCR -CCMT1204Turning Hold... ₹ 1,033.00

Turning holders comes in Right hand and left hand check the size also check Shank size 20 mm and 25 mm please choose this by looking at 2nd image for technical angel and spare parts for same. Turning Holder SCLCL/R 2020 K12 Suitable toCCMT1204 Insert.

MVQNL/R -VNMG1604 Turning Holder vnmg MVQNL/R pack of 1

Mars-Tech MVQNL/R -VNMG1604 Turning H... ₹ 1,033.00

CRM lnmu0303zer cm cp2640T grade pack of 10 (1box)

CRM CRM lnmu0303zer cm cp2640T ... ₹ 1,434.00

CRM original insert this is high feed milling insert

Kyocera TNMG160404/8 MS PR1125 Pack of 10

Kyocera Kyocera TNMG160404/8 MS PR1... ₹ 2,242.00

WE SELL ONLY ORIGINAL INSERTS TNMG Is most common turning insert used for turning application PR1125 Grade is for Stainless Steel ,M10-M30

EWN53-95 mm range fine boring head pack of 1

Mars-Tech EWN53-95 mm range fine bori... from ₹ 1,600.00

EWN53-95 fine boring head has a range of 53 mm to 75 mm if you put its cartridge you can increase the boring range with same head 5-2 - 70 TO 93 MM Inclusive 5-3 - 89 TO 112 MM inclusive Suitable insert is TCMT/TCGT 1102 Size (Inserts are bought separately)

Tabikut 2 mm 4 flute Ballnose 55 hr... ₹ 236.00

4 Flutes Ballnose. Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable packing Size of Carbide Ballnose 55 Hrc: 2mm The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes if the total length increase flute length remains the same double diameter

6 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1

Tabikut 6 mm Carbide ballnose 65 HR... from ₹ 966.00

6 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1check 2nd image for dimensions 65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size. Helix Angel of 35 degree, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM 2 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns

TPGH080202/04L T20 steel and ss grade pack of 10

Tabikut TPGH080202/04L T20 steel an... ₹ 1,912.00

TPGH080202/04L T20 grade is for steel and stainless steel can also work on cast iron used in mostly fine boring heads

Deskar WNMG080408 TM LF9018 steel and stainless steel grade insert pack of 10

Deskar Deskar WNMG080408 TM LF9018... ₹ 1,428.00

DESKAR ORIGINAL INSERTS ONLY we sell only original inserts and grade descriptions for Deskar inserts are below

Taegutec CCMT09T304/08 FG TT5080 pack of 10

TaeguTec Taegutec CCMT09T304/08 FG T... ₹ 2,419.00

WE SELL ONLY ORIGINAL INSERTS CCMT09T304 Is most commonly boring insert used for boring application TT5080 Grade is for Stainless Steel , High temperature alloy , forging. can work on P and M grade of steel and stainless steel.

6mm Shank 3 mm ballnose 4 Flute 55 HRC Tabikut pack of 1

Tabikut 6mm Shank 3 mm ballnose 4 F... ₹ 543.00

4 flute 6 mm Shank 3 mm ballnose 55 HRC Tabikut pack of 1Carbide Ballnose-55 HRC SPECIAL SIZE OF 3 MM CUTTING DIA 6 MM SHANK Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Black Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing

MGMN grooving insert LDA Deskar grooving insert pack of 10

Deskar MGMN grooving insert LDA De... from ₹ 1,010.00

Grooving Insert with Width Kindly Check Size you need in Variation. MGMN comes in many brands but suitable to korloy grooving holder. its and ISO insert.

16 mm Internal grooving bar with 2,3,4 mm tdc insert pack of 1

Elevate Tools 16 mm Internal grooving bar... ₹ 2,360.00

CHOOSE SIZE CAREFULLY MINIMUM ENTRY DIAMETER IS 22 MM Internal Grooving bar has different sizes this is suitable to TDC,TDT,TDJ,TDX Suitable to Taegutec Tip Steps to choose size. 1.Entry Diameter of the component and bar entry dia should be less than component entry dia 2. width inside you need for this if you need a 2 mm groove width you should choose 2 mm of grooving insert and if you have width of 3.5 mm you can do with both 2 mm and 3 mm of insert so choose 2 mm or 3 mm 3. Right hand or left hand as per machine or as your requirement

CBN TNGA160408 for HARDENED STEEL machining pack of 1 inserts

Tabikut CBN TNGA160408 for HARDENED... ₹ 885.00

CBN inserts for Hardened steel This is with 6 corners smooth and interrupted cut

Corner Radius Endmill 3 mm in 0.5 and 1 mm radius pack of 1

Tabikut Corner Radius Endmill 3 mm ... ₹ 295.00

A Corner radius endmill End Mill is usually used to add a specific radius to a workpiece, operation to remove a sharp edge or burr or using in some finishing operation most cutters comes with 0.5 mm , 1 mm 1.5 mm even 2 or 3 mm radius please choose as per the requirment.

CCMT09T304/08 HQ TN30 cermet carbide insert pack of 10

Tabikut CCMT09T304/08 HQ TN30 cerme... ₹ 1,770.00

TN30 Cermet grade for Steel & Stainless Steel MachiningGeneral purpose cermet with superior wear resistance and toughness for steel and stainless steel finishing.Tabikut is known as a leading manufacturer of cermets. Cermet is a composite material combining Ceramic and Metal. Typical materials used in cermets are TiC, TiN, TiCN and NbC. Designed to provide long tool life and excellent surface finishes, cermets combine toughness with superior wear resistance."Great for finishing applications ISO Range - P/M/K (P10-P20)(M10-M20)(K10-K20)IGrade or Coating Type CERMETCoating Layers CermetGrade Color METAL