Turning Holders

STFCL/R TCMT11 Boring Bar dia 10/12/16 pack of 1

Mars-Tech STFCL/R TCMT11 Boring Bar d... from ₹ 472.00

PLEASE CHECK 2ND IMAGE AND ANGEL BEFORE ORDERING. This boring bar comes in different angel which change the usage and application kindly check 2nd image of the product for technical details , spare details and angel degree

MWLNL/R WNMG06 Boring Bar dia 16/20/25 pack of 1

Mars-Tech MWLNL/R WNMG06 Boring Bar d... from ₹ 826.00

PLEASE CHECK 2ND IMAGE AND ANGEL BEFORE ORDERING. This boring bar comes in different angel which change the usage and application kindly check 2nd image of the product for technical details , spare details and angel degree

SDUCL/R Boring bar suitable to Dcmt0702/Dcmt11t3 pack of 1

Mars-Tech SDUCL/R Boring bar suitable... from ₹ 472.00

PLEASE CHECK 2ND IMAGE AND ANGEL BEFORE ORDERING. This boring bar comes in different angel which change the usage and application kindly check 2nd image of the product for technical details , spare details and angel degree Dia 8,10,12,16 comes for DCMT070204 DIA 16 COMES IN BOTH DCMT070204 AND DCMT11T3Dia 16,20,25,32 comes for DCMT11T304 Check Angle of boring bar also.

MCLNR/L CNMG1204 Boring Bar dia 16/20/25/32 pack of 1

Mars-Tech MCLNR/L CNMG1204 Boring Bar... from ₹ 826.00

PLEASE CHECK 2ND IMAGE AND ANGEL BEFORE ORDERING. This boring bar comes in different angel which change the usage and application kindly check 2nd image of the product for technical details , spare details and angel degree

MWLNL/R WNMG0604 Turning Holder wnmg MWLNR/L pack of 1

Mars-Tech MWLNL/R WNMG0604 Turning Ho... ₹ 1,033.00

Turning holders comes in Right hand and left hand check the size also check Shank size 20 mm and 25 mm please choose this by looking at 2nd image for technical angel and spare parts for same. Turning Holder MWLNR/L 2525 M06 Suitable toWNMG0603 Insert.

Step boring bar ccmt dia 8/12/16 pack of 1

Mars-Tech Step boring bar ccmt dia 8/... from ₹ 944.00

Step boring bar are also called reduce shank bar they have bigger size of shank for holding but machining part is reduce size 8 mm bar with 16 mm shank 10 mm bar with 16 mm shank 12 mm bar with 16 mm shank 16 mm bar with 20 mm shank

SCLCR -CCMT1204Turning Holder ccmt SCLCL/R pack of 1

Mars-Tech SCLCR -CCMT1204Turning Hold... ₹ 1,033.00

Turning holders comes in Right hand and left hand check the size also check Shank size 20 mm and 25 mm please choose this by looking at 2nd image for technical angel and spare parts for same. Turning Holder SCLCL/R 2020 K12 Suitable toCCMT1204 Insert.

MVQNL/R -VNMG1604 Turning Holder vnmg MVQNL/R pack of 1

Mars-Tech MVQNL/R -VNMG1604 Turning H... ₹ 1,033.00

Turning holders comes in Right hand and left hand check the size also check Shank size 20 mm and 25 mm please choose this by looking at 2nd image for technical angel and spare parts for same. Turning Holder MVQNL/R 2020 K16 Suitable toVNMG1604 Insert.

SDQCL/R Boring bar suitable to Dcmt0702/Dcmt11t3 pack of 1

Mars-Tech SDQCL/R Boring bar suitable... from ₹ 472.00

PLEASE CHECK 2ND IMAGE AND ANGEL BEFORE ORDERING. This boring bar comes in different angel which change the usage and application kindly check 2nd image of the product for technical details , spare details and angel degree Dia 8,10,12 comes for DCMT070204 Dia 16,20,25,32 comes for DCMT11T304 Check Angle of boring bar also.

SDJCL/R Boring bar suitable to Dcmt0702/Dcmt11t3 pack of 1

Mars-Tech SDJCL/R Boring bar suitable... from ₹ 472.00

PLEASE CHECK 2ND IMAGE AND ANGEL BEFORE ORDERING. This boring bar comes in different angel which change the usage and application kindly check 2nd image of the product for technical details , spare details and angel degree Dia 8,10,12 comes for DCMT070204 Dia 16,20,25 comes for DCMT11T304 Check Angle of boring bar also.

16 mm Internal grooving bar with 2,3,4 mm tdc insert pack of 1

Elevate Tools 16 mm Internal grooving bar... ₹ 2,360.00

CHOOSE SIZE CAREFULLY MINIMUM ENTRY DIAMETER IS 22 MM Internal Grooving bar has different sizes this is suitable to TDC,TDT,TDJ,TDX Suitable to Taegutec Tip Steps to choose size. 1.Entry Diameter of the component and bar entry dia should be less than component entry dia 2. width inside you need for this if you need a 2 mm groove width you should choose 2 mm of grooving insert and if you have width of 3.5 mm you can do with both 2 mm and 3 mm of insert so choose 2 mm or 3 mm 3. Right hand or left hand as per machine or as your requirement

12 MM Threading bar for 11IR insert shank of 16 mm pack of 1

Mars-Tech 12 MM Threading bar for 11I... ₹ 590.00

Right hand internal thread boring bar SNR0012M11 Entry Dia 15 mm Shank Dia 16 mm SCREW - 2.5X6 TORX KEY - T8 Length - 150MM

MCKNL/R CNMG1204 other edge boring bar Boring Bar dia 20/25/32 pack of 1

Mars-Tech MCKNL/R CNMG1204 other edge... from ₹ 1,062.00

PLEASE CHECK ANGEL PICTURE BEFORE ORDERING This boring bar is used for other edge of cnmg which is not used in general usage. you can use this boring bar to use unused side of cnmg insert CNMG1204 Check 2nd image for technical details and spare parts , cnmg also comes in different angles

stunl boring bar TNMG16 Boring Bar dia 16/20 pack of 1

Mars-Tech stunl boring bar TNMG16 Bor... from ₹ 708.00

PLEASE CHECK 2ND IMAGE AND ANGEL BEFORE ORDERING. This boring bar comes in different angel which change the usage and application kindly check 2nd image of the product for technical details , spare details and angel degree This is Screw clamp boring bar only. 3.5x12 mm screw will be used.

1.5mm MGMN150 insert Grooving Holder suitable to MGMN150 Korloy pack of 1

Elevate Tools 1.5mm MGMN150 insert Groovi... ₹ 1,652.00

CHOOSE RIGHT HAND OR LEFT HAND CAREFULLY Grooving holders are used for parting and grooving in the turning machine. 1.5 mm grooving holder suitable to KORLOY profile of insert it can fit to any insert naming MGMN150 mm T max is the maximum grooving capacity of the holder if the grooving capacity is 10 mm it means it can part 20 mm of the round bar maximum.

Mars-Tech Turning Holder tnmg MTFNR/L... ₹ 1,033.00

Turning Holder MTFNL/R2525 M16 Suitable to TNMG160404/04/08/12 Insert. Spare set remain same for right left 2020 shank 2525 shank Black Color , High Quality , Left Hand. Suitable Insert TNMG160408 Try Tabikut Turning Insert.

MCBNL/R Turning Holder suitable to cnmg1204 MCBNL/R pack of 1

Mars-Tech MCBNL/R Turning Holder suit... ₹ 1,033.00

Turning holders comes in Right hand and left hand check the size also check Shank size 20 mm and 25 mm please choose this by looking at 2nd image for technical angel and spare parts for same. Turning Holder MCBNL/R 2020 K12 Suitable toCNMG1204 INSERT.

10 MM Threading Boring bar 16MM SHANK for 11IR threading insert pack of 1

Mars-Tech 10 MM Threading Boring bar ... ₹ 826.00

Right hand internal thread boring bar SNR10M11-A16 SHANK SIZE IS 16 MM , REDUCE SHANK IS 10 MM SUITABLE INSERT IS 11 IR Entry Dia 12mm Shank Dia 16 mm SCREW - 2.5X6 TORX KEY - T8 Length - 150MM

MDPNN -dnmg1506 neutral tool m type pack of 1

Mars-Tech MDPNN -dnmg1506 neutral too... ₹ 1,035.00

MDPNN is DNMG neutral tool DNMG1506

SVJBL/R VBMT16 J angel Boring Bar Dia 16/20/25 pack of 1

Mars-Tech SVJBL/R VBMT16 J angel Bori... from ₹ 1,416.00

PLEASE CHECK 2ND IMAGE AND ANGEL BEFORE ORDERING. This boring bar comes in different angel which change the usage and application kindly check 2nd image of the product for technical details , spare details and angel degree

Get Extra 1% Discount on Jaibros App only

Find anything you need

GST Input Credit

7-Day Return

Lowest Prices

Highest Quality