ARBOR
CYLINDRICAL COLLET CHUCK
DRILL CHUCK
EDGE FINDER
ER COLLET
ER Collets
ER NUT
ER SPANNER
ER TAP COLLET
Hydraulic Collet
LOCKING DEVICE
Metrology
PULL STUDS
TORX KEY
TORX KEY HANDLE
TORX KEY HP
TORX SCREW (GREY)
TORX SCREW (HP)
TORX SCREW (NORMAL)
TORX SCREW (UHP)
UHP ER COLLET
Z setter
All products
5 & 6 Flute Endmills
Accessories
Accessories APP
Accessories APP 2
All
Ballnose (45 HRC)
Ballnose (55 HRC)
Ballnose (60 HRC)
Ballnose (65 HRC)
Ballnose (65 HRC)
Ballnose (Inserted)
Ballnose - 45 HRC
Ballnose - 55 HRC
Ballnose - 55 HRC 1
Ballnose - 60 HRC
Ballnose - 60 HRC 1
Ballnose 4 Flute (55HRC)
BBT40 Holders
Boring Heads
BPT
BT-30 Type
BT-40 BCA
BT-40 Type
Carbide Cutters
Carbide Cutters
Carbide Drills
CARBIDE15
CBN Inserts
Ceramic
Ceratizit
Cermet
Chamfer Cutter
Chamfering
Collet Chucks
Collet Chuks
Collet ER Types
Collets - ER Type
Corner Radius Endmill
Cutters High Feed
Cylindrical Chuks
Cylndrical Chuck
Dasqua
Deal of the Day
Deskar
Dijet
Drill Chuck - Keyless
Drilling Insert
Duracarb
Edge Finders
Endmill (3 Flute) DLC
Endmill (45 HRC)
Endmill (55 HRC) 1
Endmill (60 HRC)
Endmill (65 HRC)
Endmill (Inserted)
Endmill - 45 HRC
Endmill - 55 HRC
Endmill - 55 HRC 1
Endmill - 60 HRC
Endmill - 60 HRC 1
Endmill 2 Flute
Endmill Ballnose - Micro
ER Collets
ER Nuts
ER Spanners
ER Tap Collets
Find the Edge
Gauges
Grooving Inserts
Grooving Work
Heads - Boring
High Feed
Hitachi
HRC63(Nano Coated)
Indexable Cutters
Inserted Ballnose
Inserted Cutters
Inserted Endmill
Inserts
INSERTS15
ISO40 Holders
Jaibros
JXD
Keyless Drill Chuck
Knob - Pull Studs
Knob- Pull Studs
Korloy
Korloy
Kyocera
Life
Locking Device
Long Neck Cutters
Mars-Tech
Measurings
Metrology
Micro Drills
Micro Endmill Ballnose
Milling Inserts
Milling Opertations
Miscellaneous
Mitsubishi
Multifunction Tools
Non Standard Endmills
Non-Ferrous
Nuts - ER
Nuts ER
PCD Inserts
Promo Inserts
Pull Studs
Rougher Endmills
Single Flute Endmill
SK-40 Type
Spanner - ER
Spanners - ER
Straight Shank Chucks
Tabikut
Tabikut Inserts
TaeguTec
Threading Application
Threading Inserts
Tool Boy
Tools Boy
Torx Keys
Torx Screws
TURNING
Turning Holders
Turning Inserts
Turning Usage
U Drill
Uncoated End & Ball
volume discount
Wholesale Deals
Widia
Yuzuki
Z Setter
ZCCCT
Zero Pre Setter
Zero Setter
Mars-Tech
Mechanical Ceramic Edge Fin...
₹ 850.00
ceramic edge finder for magnetic componenet as ceramic is non magnetic
Mechanical Edge Finder also called touch point sensor are used for find Zero point of the workpiece and find center of the hole.
Mars-Tech
Ultra Precision Screw 4.5mm...
₹ 295.00
These are best ultra precision screw of MARS-TECH compare to any brand in the market
Mars-Tech
T type edge finder 10x28 mm...
₹ 961.00
Disc diameter is 28 mm and rod attached is 9 mm , holding dia is 10 mm
Mechanical Edge Finder also called touch point sensor are used for find Zero point of the workpiece and find center of the hole.
SCODAK
SCODAK Torque control torx ...
₹ 566.00
THESE BITS CAN ONLY BE USED WITH SCODAK torque control screw driver.
you will get 1 pc of bit
Mars-Tech
BT50 to ISO50 Adapter
₹ 630.00
The BT50 to ISO50 Adapter allows the machinist to use the same CNC holder in a conventional ISO0 machine by simply changing the retention knob/pull stud for this cheap but effective adapter. So instead of buying a new holder, you just purchase the OTT retention knob/pull stud and exchange the pull stud to convert the holder from BT50 to a standard SK holder for a conventional machine.
REAR THREAD M24
Mars-Tech
JIS7388/2/B-1983 PULL STUD ...
₹ 300.00
This is a special pull stud kindly check 2nd image for technical details
SCODAK
SCODAK Torque control torx ...
₹ 3,304.00
Torque control key is used for saving from over tightening of screw
This is T15 size comes with 2 bits long and short for T15
SCODAK
SCODAK Torque control torx ...
₹ 3,304.00
Torque control key is used for saving from over tightening of screw
This is T8 size comes with 2 bits long and short for T8
Mars-Tech
ER 50 COLLET DIA 32 PACK OF 1
₹ 1,866.00
The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50.
ER50 series collets have a capacity of 6mm-34mm. Each ER50 collet has a range of (2 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (1.8mm). For example, ER50-32mm can grab a round shank from 32mm diameter to 30.2mm diameter.
SCODAK
SCODAK Torque control torx ...
₹ 3,304.00
Torque control key is used for saving from over tightening of screw
This is T6 size comes with 2 bits long and short for T6