Indexable Cutters

Mars-Tech 20 MM Bull Cutter Suitable ... ₹ 1,143.00

20 MM Bull Cutter Suitable To RPMT10T3 R5 Insert 200 mm long pack of 1This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of RPMT10T3/RDKW10T3/R5 OF mostly brand into this.

50 mm Apmt1135 other edge 75 degree insert cutter pack of 1

Mars-Tech 50 mm Apmt1135 other edge 7... ₹ 1,750.00

50 mm Apmt1135 other edge insert 75 degree 4 pocket Dia 50- 4 pocket cutter for APMT135 insert , facemill cutter 50 mm apmt1135 Shank Holder FMB-22 This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use APMT1135 Of Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check the description of the size from other brands to fix this insert.

63mm Apmt1135 other edge 75 degree insert cutter pack of 1

Mars-Tech 63mm Apmt1135 other edge 75... ₹ 2,070.00

63 mm Apmt1135 other edge insert 75 degree 4 pocket Dia 63- 4 pocket cutter for APMT135 insert , facemill cutter 63 mm apmt1135 Shank Holder FMB-22 This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use APMT1135 Of Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check the description of the size from other brands to fix this insert.

Sold out

ONMU080608 TK1510 steel/stainless steel grade pack of 10

Mars-Tech ONMU080608 TK1510 steel/sta... ₹ 3,800.00

ONMU080608 octagonal shape insert suitable to ONMU Milling cutter with 16 multiple edges.

Mars-Tech 200 mm APMT16 cutter ₹ 13,541.00

200 mm cutter suitable to APMT1604 60 mm flange type hole with 4 pcd holes

Mars-Tech Back Chamfer Cutter 45 degr... from ₹ 4,248.00

This is Back Chamfer tools Suitable to SPMG inserts

20mm ball nose suitable insert 10r insert pack of 1(insert not include)

Mars-Tech 20mm ball nose suitable ins... ₹ 4,130.00

SUITABLE TO DIJET INSERTS FULL ROUND INSERT BALLNOSE

16 mm ballnose dijet 150 Length inserted ballnose suitable to dijet insert pack of 1

Mars-Tech 16 mm ballnose dijet 150 Le... ₹ 3,776.00

This is full ballnose radius cutter its 16 mm with R8 radius only suitable to DIJET BNM INSERT JC8003

SDMT1204 Milling Cutter DIA 50,63,80,100 suitable to Widia Insert M690 series pack of 1

Mars-Tech SDMT1204 Milling Cutter DIA... from ₹ 3,100.00

CUTTER WITH THROUGH COOLANT HOLES This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use SDMT1204 Of WIDIA and Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check descriptions of sizes from other brands to fix this insert.

ONMU0806 cutter 50/63/80/100/125/160 pack of 1

Mars-Tech ONMU0806 cutter 50/63/80/10... from ₹ 8,260.00

suitable insert KORLOY/ISCAR/YG1/ZCC ONMU080608 16 EDGE

TPKN16 Milling cutter 50/63/80 mm pack of 1

Mars-Tech TPKN16 Milling cutter 50/63... from ₹ 3,776.00

TPKN16 insert cutter

TFDD12 Carbide Insert Square shape 120408r pack of 10

Tabikut TFDD12 Carbide Insert Squar... ₹ 5,782.00

This is only TFDD chamfer cutter insert Can be used on all cutting material as PMK Steel, Stainless steel and cast iron non ferrous.

TFDD16 Carbide Insert TRIANGLE SHAPE 16T304 pack of 10

Tabikut TFDD16 Carbide Insert TRIAN... ₹ 5,546.00

This is only TFDD chamfer cutter insert Can be used on all cutting material as PMK Steel, Stainless steel and cast iron non ferrous.

0-20 mm 45 degree triangle insert TFDD chamfer cutter pack of 1

Mars-Tech 0-20 mm 45 degree triangle ... ₹ 4,484.00

This chamfer cutter is 45 degree you can chamfer from 0 mm This has a special insert which only fit to this not any general inserts will fit to this.

0-16 mm 45 degree TFDD120408 chamfer cutter pack of 1

Mars-Tech 0-16 mm 45 degree TFDD12040... ₹ 4,602.00

This chamfer cutter is 45 degree you can chamfer from 0 mm This has a special insert which only fit to this not any general inserts will fit to this.

Mars-Tech 100 mm SNMX1206 Insert Face... ₹ 13,841.00

SNMX1206 Facemill Cutter , indexable cutter body RM8 series 8 edges insert cutter body for dia 50 ,63 and 80 mm in 45 degree and 88 degree This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use SNMX1206 Of Korloy and Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.