ARBOR
BBT40
BORING KIT
BST HOLDER
BT30 HOLDER
BT40 HOLDER
C TYPE BORING HEAD
Carbide Boring Bar
Carbide PCD insert
Chamfer Cutter
CYLINDRICAL COLLET CHUCK
DEAL
DRILL CHUCK
EDGE FINDER
ER COLLET
ER Collets
ER NUT
ER SPANNER
ER TAP COLLET
EWN Fine Boring head
EXTENSION
Hydraulic Collet
Indexable Cutters
Indexable Milling Cutter
Indexable Milling Cutters
ISO40 HOLDERS
LOCKING DEVICE
Metrology
Modular Face Mill Cutter
Multifunction Drill
PULL STUDS
SDJ Boring heads
Shank Type Cutter
Steel Boring Bar
TCT Rough Boring Head
Threading Boring Bar
TORX KEY
TORX KEY HANDLE
TORX KEY HP
TORX SCREW (GREY)
TORX SCREW (HP)
TORX SCREW (NORMAL)
TORX SCREW (UHP)
Turning Tool Holders
U Drill
UHP ER COLLET
Z setter
All products
Accessories
Accessories APP
Accessories APP 2
All
Ballnose (45 HRC)
Ballnose (55 HRC)
Ballnose (60 HRC)
Ballnose (65 HRC)
Ballnose (65 HRC)
Ballnose (Inserted)
Ballnose - 45 HRC
Ballnose - 55 HRC
Ballnose - 55 HRC 1
Ballnose - 60 HRC
Ballnose - 60 HRC 1
BBT40 Holders
Boring Heads
BPT
BT-30 Type
BT-40 BCA
BT-40 Type
Carbide Cutters
Carbide Cutters
Carbide Drills
CBN Inserts
Ceramic
Ceratizit
Cermet
Chamfer Cutter
Chamfering
Collet Chucks
Collet Chuks
Collet ER Types
Collets - ER Type
Corner Radius Endmill
Cutters High Feed
Cylindrical Chuks
Cylndrical Chuck
Dasqua
Deal of the Day
Deskar
Dijet
Drill Chuck - Keyless
Drilling Insert
Duracarb
Edge Finders
Endmill (3 Flute) DLC
Endmill (45 HRC)
Endmill (55 HRC) 1
Endmill (60 HRC)
Endmill (65 HRC)
Endmill (Inserted)
Endmill - 45 HRC
Endmill - 55 HRC
Endmill - 55 HRC 1
Endmill - 60 HRC
Endmill - 60 HRC 1
Endmill 2 Flute
Endmill Ballnose - Micro
ER Collets
ER Nuts
ER Spanners
ER Tap Collets
Find the Edge
Gauges
Grooving Inserts
Grooving Work
Heads - Boring
High Feed
Hitachi
Indexable Cutters
Inserted Ballnose
Inserted Cutters
Inserted Endmill
Inserts
ISO40 Holders
Jaibros
JXD
Keyless Drill Chuck
Knob - Pull Studs
Knob- Pull Studs
Korloy
Korloy
Kyocera
Life
Locking Device
Long Neck Cutters
Mars-Tech
Measurings
Metrology
Micro Endmill Ballnose
Milling Inserts
Milling Opertations
Miscellaneous
Mitsubishi
Multifunction Tools
Non Standard Endmills
Non-Ferrous
Nuts - ER
Nuts ER
PCD Inserts
Pull Studs
Rougher Endmills
Single Flute Endmill
SK-40 Type
Spanner - ER
Spanners - ER
Straight Shank Chucks
Tabikut
Tabikut Inserts
TaeguTec
Threading Application
Threading Inserts
Tool Boy
Tools Boy
Torx Keys
Torx Screws
Turning Holders
Turning Inserts
Turning Usage
U Drill
Widia
Yuzuki
Z Setter
ZCCCT
Zero Pre Setter
Zero Setter
Mars-Tech
20 MM Bull Cutter Suitable ...
₹ 1,143.00
20 MM Bull Cutter Suitable To RPMT10T3 R5 Insert 200 mm long pack of 1This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of RPMT10T3/RDKW10T3/R5 OF mostly brand into this.
Mars-Tech
MWLNL/R WNMG06 Boring Bar d...
from ₹ 826.00
PLEASE CHECK 2ND IMAGE AND ANGEL BEFORE ORDERING.
This boring bar comes in different angel which change the usage and application kindly check 2nd image of the product for technical details , spare details and angel degree
Mars-Tech
50 mm Apmt1135 other edge 7...
₹ 1,750.00
50 mm Apmt1135 other edge insert 75 degree 4 pocket Dia 50- 4 pocket cutter for APMT135 insert , facemill cutter 50 mm apmt1135 Shank Holder FMB-22
This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use APMT1135 Of Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check the description of the size from other brands to fix this insert.
Mars-Tech
Step boring bar ccmt dia 8/...
from ₹ 944.00
Step boring bar are also called reduce shank bar they have bigger size of shank for holding but machining part is reduce size
8 mm bar with 16 mm shank
10 mm bar with 16 mm shank
12 mm bar with 16 mm shank
16 mm bar with 20 mm shank
Mars-Tech
STFCL/R TCMT11 Boring Bar d...
from ₹ 472.00
PLEASE CHECK 2ND IMAGE AND ANGEL BEFORE ORDERING.
This boring bar comes in different angel which change the usage and application kindly check 2nd image of the product for technical details , spare details and angel degree
Mars-Tech
Ultra Precision Screw 4.5mm...
₹ 295.00
These are best ultra precision screw of MARS-TECH compare to any brand in the market
Mars-Tech
Turning Holder tnmg MTFNR/L...
₹ 1,033.00
Turning Holder MTFNL/R2525 M16 Suitable to TNMG160404/04/08/12 Insert.
Spare set remain same for right left 2020 shank 2525 shank
Black Color , High Quality , Left Hand.
Suitable Insert TNMG160408 Try Tabikut Turning Insert.
Mars-Tech
stunl boring bar TNMG16 Bor...
from ₹ 708.00
PLEASE CHECK 2ND IMAGE AND ANGEL BEFORE ORDERING.
This boring bar comes in different angel which change the usage and application kindly check 2nd image of the product for technical details , spare details and angel degree
This is Screw clamp boring bar only. 3.5x12 mm screw will be used.
Mars-Tech
MCLNR/L CNMG1204 Boring Bar...
from ₹ 826.00
PLEASE CHECK 2ND IMAGE AND ANGEL BEFORE ORDERING.
This boring bar comes in different angel which change the usage and application kindly check 2nd image of the product for technical details , spare details and angel degree
Mars-Tech
63mm Apmt1135 other edge 75...
₹ 2,070.00
63 mm Apmt1135 other edge insert 75 degree 4 pocket Dia 63- 4 pocket cutter for APMT135 insert , facemill cutter 63 mm apmt1135 Shank Holder FMB-22
This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use APMT1135 Of Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check the description of the size from other brands to fix this insert.
Mars-Tech
SDUCL/R Boring bar suitable...
from ₹ 472.00
PLEASE CHECK 2ND IMAGE AND ANGEL BEFORE ORDERING.
This boring bar comes in different angel which change the usage and application kindly check 2nd image of the product for technical details , spare details and angel degree
Dia 8,10,12,16 comes for DCMT070204
DIA 16 COMES IN BOTH DCMT070204 AND DCMT11T3Dia 16,20,25,32 comes for DCMT11T304
Check Angle of boring bar also.
Mars-Tech
MTUNL/R TNMG1604 Boring Bar...
from ₹ 826.00
PLEASE CHECK 2ND IMAGE AND ANGEL BEFORE ORDERING.
This boring bar comes in different angel which change the usage and application kindly check 2nd image of the product for technical details , spare details and angel degree
Mars-Tech
ONMU080608 TK1510 steel/sta...
₹ 3,800.00
ONMU080608 octagonal shape insert suitable to ONMU Milling cutter with 16 multiple edges.
Mars-Tech
SDJ Spare for all sizes cho...
from ₹ 1,926.00
This is spare part of SDJ boring bar as per size of bars
SDJ25-47 - SPARE NAME - SDJ25 SPARE
SDJ32-66 - SPARE NAME - SDJ32 SPARE
SDJ40-78 - SPARE NAME - SDJ40 SPARE
SDJ52-108 - SPARE NAME - SDJ52 SPARE
SDJ68 - 114 - SPARE NAME - SDJ68 SPARE
SDJ114 - 160 - SPARE NAME - SDJ114 SPARE
Mars-Tech
cbk and lbk extensions pack...
from ₹ 1,295.00
CBK AND LBK extension are used to increase the length of holder
these are used in SDJ , EWN , TCT , TWIN boring head fine and rought
Mars-Tech
EWN53-95 mm range fine bori...
from ₹ 1,600.00
EWN53-95 fine boring head has a range of 53 mm to 75 mm if you put its cartridge you can increase the boring range with same head
5-2 - 70 TO 93 MM Inclusive
5-3 - 89 TO 112 MM inclusive
Suitable insert is TCMT/TCGT 1102 Size (Inserts are bought separately)
Mars-Tech
10 MM Threading bar for 11I...
₹ 590.00
Right hand internal thread boring bar
SNR0012M11
Entry Dia 15 mm
Shank Dia 12 mm
SCREW - 2.5X6
TORX KEY - T8
Length - 150MM
Mars-Tech
MCKNL/R CNMG1204 other edge...
from ₹ 1,062.00
PLEASE CHECK ANGEL PICTURE BEFORE ORDERING
This boring bar is used for other edge of cnmg which is not used in general usage. you can use this boring bar to use unused side of cnmg insert CNMG1204
Check 2nd image for technical details and spare parts , cnmg also comes in different angles
Mars-Tech
MTQNL/R TNMG1604 Boring Bar...
from ₹ 826.00
PLEASE CHECK 2ND IMAGE AND ANGEL BEFORE ORDERING.
This boring bar comes in different angel which change the usage and application kindly check 2nd image of the product for technical details , spare details and angel degree