Mars-Tech

STFCL/R TCMT16 Boring Bar dia 16/20/25 pack of 1

Mars-Tech STFCL/R TCMT16 Boring Bar d... from ₹ 708.00

PLEASE CHECK 2ND IMAGE AND ANGEL BEFORE ORDERING. This boring bar comes in different angel which change the usage and application kindly check 2nd image of the product for technical details , spare details and angel degree

SCMCN -CCMT09T3 Turning Holder ccmt SCMCN pack of 1

Mars-Tech SCMCN -CCMT09T3 Turning Hol... ₹ 1,033.00

Turning holders comes in Right hand and left hand check the size also check Shank size 20 mm and 25 mm please choose this by looking at 2nd image for technical angel and spare parts for same. Turning Holder SCMCN 1616 M09 Suitable toCCMT09T3 Insert.

MDQNL/R - dnmg1506 Turning holder pack of 1

Mars-Tech MDQNL/R - dnmg1506 Turning ... ₹ 1,033.00

Turning holders comes in Right hand and left hand check the size also check Shank size 20 mm and 25 mm please choose this by looking at 2nd image for technical angel and spare parts for same. Turning Holder MDQNL/R 2020 M15 Suitable toDNMG1506 Insert.

JIS7388/2/B-1983 PULL STUD special size pack of 1

Mars-Tech JIS7388/2/B-1983 PULL STUD ... ₹ 300.00

This is a special pull stud kindly check 2nd image for technical details

16 mm ballnose dijet 150/200 Length inserted ballnose suitable to dijet insert pack of 1

Mars-Tech 16 mm ballnose dijet 150/20... from ₹ 3,445.00

This is full ballnose radius cutter its 16 mm with R8 radius only suitable to DIJET BNM160 INSERT JC8003

Eccentric Sleeves for U drills pack of 1

Mars-Tech Eccentric Sleeves for U dri... ₹ 1,700.00

Eccentric sleeves are used for u drill to increase size in 0.2 mm and reduce it too like this so you can achieve the target size you need. 20-25 means 20 mm shank of u drill 25 mm of holder inner diameter 20-32 means 20 mm shank of u drill 32 mm of holder inner diameter 25-32 means 25 mm shank of u drill 32 mm of holder inner diameter 25- 40 means 25 mm shank of u drill 40 mm of holder inner diameter 32 -40 means 32 mm shank of u drill 40 mm of holder inner diameter ID STAND FOR INNER DIAMTER OF SLEEVE OD STAND FOR OUTSIDE DIAMTER OF SLEEVE Using the eccentric sleeves, you can vary and adjust the diameter of the hole by +/- 0.2 mm with ease

25 mm Internal grooving bar MGMN200 insert pack of 1

Mars-Tech 25 mm Internal grooving bar... ₹ 2,360.00

CHOOSE SIZE CAREFULLY MINIMUM ENTRY DIAMETER IS 30 MM TMAX IS 5 MM Internal Grooving bar has different sizes this is suitable to MGMN INSERT 2 MM Suitable to KORLOY OR EQUIVALENT Tip Steps to choose size. 1.Entry Diameter of the component and bar entry dia should be less than component entry dia 2. width inside you need for this if you need a 2 mm groove width you should choose 2 mm of grooving insert and if you have width of 3.5 mm you can do with both 2 mm and 3 mm of insert so choose 2 mm or 3 mm 3. Right hand or left hand as per machine or as your requirement

20 mm Internal grooving bar MGMN300 insert pack of 1

Mars-Tech 20 mm Internal grooving bar... ₹ 2,360.00

CHOOSE SIZE CAREFULLY MINIMUM ENTRY DIAMETER IS 25 MM TMAX 6 MM Internal Grooving bar has different sizes this is suitable to MGMN INSERT 3 MM Suitable to KORLOY OR EQUIVALENT Tip Steps to choose size. 1.Entry Diameter of the component and bar entry dia should be less than component entry dia 2. width inside you need for this if you need a 2 mm groove width you should choose 2 mm of grooving insert and if you have width of 3.5 mm you can do with both 2 mm and 3 mm of insert so choose 2 mm or 3 mm 3. Right hand or left hand as per machine or as your requirement

SDMT1204 Milling Cutter DIA 50,63,80,100 suitable to Widia Insert M690 series pack of 1

Mars-Tech SDMT1204 Milling Cutter DIA... from ₹ 3,100.00

CUTTER WITH THROUGH COOLANT HOLES This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use SDMT1204 Of WIDIA and Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check descriptions of sizes from other brands to fix this insert.

Mars-Tech Fine Boring Bar 500-610 mm ... ₹ 32,030.00

Fine boring bar for bigger hole range Suitable Insert is TCMT1102 (insert not included) Weight of the bar is 5.9 Kg ( holder not included)Boring bar minimum length is 121 mm Suitable holder is BST Type

EWN41-74 mm range fine boring head pack of 1

Mars-Tech EWN41-74 mm range fine bori... from ₹ 1,500.00

EWN41-74 fine boring head has a range of 40 mm to 55 mm if you put its cartridge you can increase the boring range with same head 4-2 - 51 TO 66 MM Inclusive 4-3 - 64 TO 79 MM inclusive Suitable insert is TCMT/TCGT 1102 Size (Inserts are bought separately)

EWN20-36 mm range fine boring head pack of 1

Mars-Tech EWN20-36 mm range fine bori... from ₹ 1,062.00

EWN20 fine boring head has a range of 20 mm to 25 mm if you put its cartridge you can increase the boring range with same head 1-2 - 25 TO 31 MM Inclusive 1-3 - 30 TO 36 MM inclusive Suitable insert is TPGH/X 0802 Size (Inserts are bought separately)

EWN25-47 mm range fine boring head pack of 1

Mars-Tech EWN25-47 mm range fine bori... from ₹ 1,062.00

EWN25-47 fine boring head has a range of 25 mm to 33 mm if you put its cartridge you can increase the boring range with same head 2-2 - 32 TO 40 MM Inclusive 2-3 - 39 TO 47MM inclusive Suitable insert is TPGH/X 0802 Size (Inserts are bought separately)

SDZCL/R Boring bar suitable to Dcmt0702/Dcmt11t3 pack of 1

Mars-Tech SDZCL/R Boring bar suitable... from ₹ 472.00

PLEASE CHECK 2ND IMAGE AND ANGEL BEFORE ORDERING. This boring bar comes in different angel which change the usage and application kindly check 2nd image of the product for technical details , spare details and angel degree Dia 10,12 comes for DCMT070204 Dia 16,20,25,32 comes for DCMT11T304 Check Angle of boring bar also.

SRDCN 2020 RC1003 insert holder for turining radius pack of 1

Mars-Tech SRDCN 2020 RC1003 insert ho... ₹ 1,033.00

SRDCN is a Screw clamp holders in 2020 shank SCREW SIZE 4x8 its neutral tool

SRDCN 2020 RC0803 insert holder for turining radius pack of 1

Mars-Tech SRDCN 2020 RC0803 insert ho... ₹ 1,033.00

SRDCN is a Screw clamp holders in 2020 shank SCREW SIZE 3x8 its neutral tool

32 mm ccmt boring bar suitable to ccmt09/12 pack of 1

Mars-Tech 32 mm ccmt boring bar suita... ₹ 2,360.00

DIA 32 MM CCMT BORING BAR COMES WITH 2 INSERTS CCMT09T3 AND CCMT1204

MVQNR/L VNMG1604 boring bar angle Boring Bar dia 25/32 pack of 1

Mars-Tech MVQNR/L VNMG1604 boring bar... from ₹ 1,888.00

PLEASE CHECK 2ND IMAGE AND ANGEL BEFORE ORDERING. This boring bar comes in different angel which change the usage and application kindly check 2nd image of the product for technical details , spare details and angel degree

MVUNL/R VNMG1604 U angel Boring Bar dia 20/25/32 pack of 1

Mars-Tech MVUNL/R VNMG1604 U angel Bo... from ₹ 1,652.00

PLEASE CHECK 2ND IMAGE AND ANGEL BEFORE ORDERING. This boring bar comes in different angel which change the usage and application kindly check 2nd image of the product for technical details , spare details and angel degree YPES

VBMT16 Q angle Boring Bar dia 16/20/25/32 pack of 1

Mars-Tech VBMT16 Q angle Boring Bar d... from ₹ 1,416.00

PLEASE CHECK 2ND IMAGE AND ANGEL BEFORE ORDERING. This boring bar comes in different angel which change the usage and application kindly check 2nd image of the product for technical details , spare details and angel degree

Get Extra 1% Discount on Jaibros App only

Find anything you need

GST Input Credit

7-Day Return

Lowest Prices

Highest Quality