Tabikut

Tabikut 6 mm 2 flute cutter 45/55 h... from ₹ 230.00

6 mm 2 flute endmill used for 50 long metal and wood

TPGH090202/04L T20 steel and stainless steel grade pack of 10

Tabikut TPGH090202/04L T20 steel an... ₹ 1,912.00

TPGH090202/04L T20 grade is for steel and stainless steel can also work on cast iron used in mostly fine boring heads

Tabikut APMT1604 T15H grade Carbide... ₹ 1,239.00

APMT1604 T15H grade Carbide Insert Tabikut pack of 10APMT1604 T15H . T15H Grade is for general machining steel stainless steel Forging etc. Carbide inserts for Steel and Stainless Steel machining with or without coolant, are used in any suitable cutter for BAP400R, and this is used in milling machines mainly. Suitable cutter any cutter which suits the APMT1604 insert.For steel, mild steel, HRC upto 45-55 with and without coolantAPMT1604 for BAP400R cutters brown coatedSUITABLE TO ALL MILLING CUTTERS FOR APMT1604

4 mm Carbide Endmill 50/75/100 LONG 65 HRC 4 Flutes PACK OF 1

Tabikut 4 mm Carbide Endmill 50/75/... from ₹ 584.00

4 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1check 2nd image for dimensions 65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size. Helix Angel of 35 degree, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM 4 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns

3 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1

Tabikut 3 mm Carbide Endmill 65 HRC... from ₹ 584.00

3 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1check 2nd image for dimensions 65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size. Helix Angel of 35 degrees, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM 4 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns

DNMG150608 TM125 Tabikut steel and stainless steel grade Pack of 10 Steel Grade

Tabikut DNMG150608 TM125 Tabikut st... ₹ 2,218.00

DNMG150608 TM 125 Carbide Insert with 0.8 mm Radius used on Steel , Mild Steel General Parameters are mentioned on box 1 Box contain 10 inserts. This is Steel and stainless steel Grade

TPGH110302/04L T20 steel and stainless steel grade pack of 10

Tabikut TPGH110302/04L T20 steel an... ₹ 1,912.00

TPGH110302/04L T20 grade is for steel and stainless steel can also work on cast iron used in mostly fine boring heads

6 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1

Tabikut 6 mm Carbide Endmill 65 HRC... from ₹ 991.00

6 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1check 2nd image for dimensions 65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size. Helix Angel of 35 degree, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM 4 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns

APMT160430 T20 Carbide Insert 3 mm radius TABIKUT Insert apmt16

Tabikut APMT160430 T20 Carbide Inse... ₹ 2,360.00

3MM RADIUS INSERT WE SELL ORIGINAL INSERTS ONLY APMT160430 T20 grade T20 Grade is for general soft machining and Carbide insert for Steel and Stainless Steel machining with or without coolant , used in any suitable cutter for BAP400R and this is used in milling machine mainly. Suitable cutter any cutter which suits APMT1604 insert.For steel , mild steel , hrc upto 45-55 with and without coolantAPMT1604 for BAP400R cutters brown coatedSUITABLE TO ALL MILLING CUTTER FOR APMT1604

5 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1

Tabikut 5 mm Carbide Endmill 65 HRC... from ₹ 991.00

5 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1check 2nd image for dimensions 65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size. Helix Angel of 35 degrees, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM 4 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns

Corner Radius Endmill 3 mm in 0.5 and 1 mm radius pack of 1

Tabikut Corner Radius Endmill 3 mm ... ₹ 295.00

A Corner radius endmill End Mill is usually used to add a specific radius to a workpiece, operation to remove a sharp edge or burr or using in some finishing operation most cutters comes with 0.5 mm , 1 mm 1.5 mm even 2 or 3 mm radius please choose as per the requirment.

Rib Cutter ballnose 1 mm- 2 flute 55 hrc pack of 1

Tabikut Rib Cutter ballnose 1 mm- 2... ₹ 578.00

Rib cutter also called Long Neck ballnose Cutters are used for deep work of machining these comes with diffrent lengths like 8 mm , 10mm , 12 mm , 14mm , 16mm , 20 mm please select the length before ordering

Tabikut 4 mm 4 flute Ballnose 55 hr... from ₹ 236.00

4 Flutes Ballnose. Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable packing Size of Carbide Ballnose 55 Hrc: 4mm The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes if the total length increase flute length remains the same double diameter

Rib Cutter ballnose 1.5 mm- 2 flute 55 hrc pack of 1

Tabikut Rib Cutter ballnose 1.5 mm-... ₹ 578.00

TNMG160404/8 Cerment insert for finishing pack of 10

Tabikut TNMG160404/8 Cerment insert... ₹ 1,888.00

CT1500 UNCOATED Cermet grade for turning, grooving & parting of alloy steels & stainless steels with high surface quality and long tool life due to high wear resistance and low coefficient of frictionISO Range - P/M/K (P10-P20)(M10-M20)(K10-K20)IGrade or Coating Type CERMETCoating Layers CermetGrade Color METAL PV1505 COATED GRADEPVD coated Cermet grade with excellent wear resistance and low coefficient of friction for high speed finish turning of steels, stainless steels and cast irons with long tool lifeISO Range - P/M/K (P05-P20)(M05-M20)(K05-K20)ISO Range - H/S/NGrade or Coating Type PVD+CERMETCoating Layers TiNGrade Color YELLOW

TNMG160404/08 tk4509 Right hand knife edge pack of 10 pcs

Tabikut TNMG160404/08 tk4509 Right ... ₹ 1,180.00

TNMG160404/08 RS TK 4509 Carbide Insert with 0.8 mm Radius used on Steel , Mild Steel General Parameters are mentioned on box 1 Box contain 10 inserts. This is Steel Grade not cast iron

4 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1

Tabikut 4 mm Carbide ballnose 65 HR... from ₹ 585.00

4 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1check 2nd image for dimensions 65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size. Helix Angel of 35 degree, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM 2 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns

Tabikut 8 mm 2 flute cutter 45/55 h... from ₹ 521.00

8 mm 2 flute endmill used for 60/75/100/150 mm long metal and wood

8 mm Carbide Endmill 65 HRC 4 Flutes LONG PACK OF 1

Tabikut 8 mm Carbide Endmill 65 HRC... from ₹ 1,617.00

8 mm Carbide Endmill 65 HRC 4 Flutes 8X60/100 LONG PACK OF 1check 2nd image for dimensions 65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size. Helix Angel of 35 degree, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM 4 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns

MGMN T15H grade Grooving Insert 2/3/4 mm Suitable steel and stainless steel Pack Of 10

Tabikut MGMN T15H grade Grooving In... from ₹ 1,581.00

T15H GRADE Grooving Insert with 1.5/2/3/4/5 MM Width Kindly Check Size you need in Variation. MGMN comes in many brands but suitable to korloy grooving holder. its and ISO insert.