Carbide Milling Inserts CARBIDE ENDMILL 55 HRC Carbide Ballnose 55 HRC Carbide Turning Insert Carbide Drilling Inserts Carbide Threading insert Carbide Ballnose 45 HRC Carbide Micro Endmill Ballnose Carbide Endmill 60 HRC Carbide Ballnose 60 HRC DEAL Carbide Single Flute Cutters Carbide Endmill 45 HRC Carbide Grooving Insert Carbide PCD insert Rib Cutter Roughing Cutter Corner Radius Endmill DLC 3 Flute Cutter CARBIDE ENDMILL 65 HRC WOOD CUTTER Taper Ballnose Chamfer Cutter Insert Cermet Turning Inserts CBN Insert CARBIDE INSERT Multifunction Drill 2 flute carbide cutter Carbide Ballnose 65 HRC Ballnose 4 Flute Uncoated End & Ball
Back to all products Tabikut
All products Accessories Accessories APP Accessories APP 2 All Ballnose (45 HRC) Ballnose (55 HRC) Ballnose (60 HRC) Ballnose (65 HRC) Ballnose (65 HRC) Ballnose (Inserted) Ballnose - 45 HRC Ballnose - 55 HRC Ballnose - 55 HRC 1 Ballnose - 60 HRC Ballnose - 60 HRC 1 Ballnose 4 Flute (55HRC) BBT40 Holders Boring Heads BPT BT-30 Type BT-40 BCA BT-40 Type Carbide Cutters Carbide Cutters Carbide Drills CARBIDE15 CBN Inserts Ceramic Ceratizit Cermet Chamfer Cutter Chamfering Collet Chucks Collet Chuks Collet ER Types Collets - ER Type Corner Radius Endmill Cutters High Feed Cylindrical Chuks Cylndrical Chuck Dasqua Deal of the Day Deskar Dijet Drill Chuck - Keyless Drilling Insert Duracarb Edge Finders Endmill (3 Flute) DLC Endmill (45 HRC) Endmill (55 HRC) 1 Endmill (60 HRC) Endmill (65 HRC) Endmill (Inserted) Endmill - 45 HRC Endmill - 55 HRC Endmill - 55 HRC 1 Endmill - 60 HRC Endmill - 60 HRC 1 Endmill 2 Flute Endmill Ballnose - Micro ER Collets ER Nuts ER Spanners ER Tap Collets Find the Edge Gauges Grooving Inserts Grooving Work Heads - Boring High Feed Hitachi Indexable Cutters Inserted Ballnose Inserted Cutters Inserted Endmill Inserts INSERTS15 ISO40 Holders Jaibros JXD Keyless Drill Chuck Knob - Pull Studs Knob- Pull Studs Korloy Korloy Kyocera Life Locking Device Long Neck Cutters Mars-Tech Measurings Metrology Micro Endmill Ballnose Milling Inserts Milling Opertations Miscellaneous Mitsubishi Multifunction Tools Non Standard Endmills Non-Ferrous Nuts - ER Nuts ER PCD Inserts Promo Inserts Pull Studs Rougher Endmills Single Flute Endmill SK-40 Type Spanner - ER Spanners - ER Straight Shank Chucks Tabikut Tabikut Inserts TaeguTec Threading Application Threading Inserts Tool Boy Tools Boy Torx Keys Torx Screws TURNING Turning Holders Turning Inserts Turning Usage U Drill Uncoated End & Ball volume discount Wholesale Deals Widia Yuzuki Z Setter ZCCCT Zero Pre Setter Zero Setter
Sold out
1mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1
Solid Carbide Endmill
1mm Carbide Endmill
Tabikut 1mm Carbide Endmill 65 HRC ... ₹ 584.00
1mm Carbide Endmill 65 HRC 4 Flutes  PACK OF 1Check 2nd image for dimensions 65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size. Helix Angel of 35 degrees, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM 4 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns  
2 flute 16 mm cutter 45 hrc pack of 1
Tabikut 2 flute 16 mm cutter 45 hrc... ₹ 2,183.00
16 mm 2 flute endmill used for 100 mm long metal and wood 
2 flute 20 mm cutter uncoated pack of 1
Tabikut 2 flute 20 mm cutter uncoat... ₹ 3,405.00
20 mm 2 flute endmill used for 100 mm long metal and wood aluminium
2 flute 6 mm cutter 45/55 hrc pack of 1
2 flute 6 mm cutter 45/55 hrc pack of 1
2 flute 6 mm cutter 45/55 hrc pack of 1
2 flute 6 mm cutter 45/55 hrc pack of 1
2 flute 6 mm cutter 45/55 hrc pack of 1
2 flute 6 mm cutter 45/55 hrc pack of 1
2 flute 6 mm cutter 45/55 hrc pack of 1
2 flute 6 mm cutter 45/55 hrc pack of 1
2 flute 6 mm cutter 45/55 hrc pack of 1
2 flute 6 mm cutter 45/55 hrc pack of 1
Tabikut 2 flute 6 mm cutter 45/55 h... from ₹ 270.00
6 mm 2 flute endmill used for 50/75/100/150mm long metal and wood 
2 flute 8 mm cutter 45/55 hrc pack of 1
2 flute 8 mm cutter 45/55 hrc pack of 1
2 flute 8 mm cutter 45/55 hrc pack of 1
2 flute 8 mm cutter 45/55 hrc pack of 1
2 flute 8 mm cutter 45/55 hrc pack of 1
2 flute 8 mm cutter 45/55 hrc pack of 1
2 flute 8 mm cutter 45/55 hrc pack of 1
2 flute 8 mm cutter 45/55 hrc pack of 1
2 flute 8 mm cutter 45/55 hrc pack of 1
Tabikut 2 flute 8 mm cutter 45/55 h... from ₹ 551.00
8 mm 2 flute endmill used for 60/75/100/150 mm long metal and wood 
2 mm 4 flute Ballnose 55 hrc pack of 1
2 mm 4 flute Ballnose 55 hrc pack of 1
Tabikut 2 mm 4 flute Ballnose 55 hr... ₹ 236.00
4 Flutes Ballnose. Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.  Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable packing Size of Carbide Ballnose 55 Hrc: 2mm The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes if the total length increase flute length remains the same double diameter
2 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1
2 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1
Tabikut 2 mm Carbide ballnose 65 HR... ₹ 584.00
2 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1check 2nd image for dimensions  65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size. Helix Angel of 35 degree, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM 2 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns
2 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1
Carbide Endmill 65 HRC
2mm Carbide Endmill
Tabikut 2 mm Carbide Endmill 65 HRC... ₹ 584.00
2 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1check 2nd image for dimensions  65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size. Helix Angel of 35 degrees, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM 4 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns
2 mm endmill 3 flute uncoated in 6 mm shank pack of 1
Tabikut 2 mm endmill 3 flute uncoat... ₹ 450.00
2/3/4 Flute uncoated Carbide Endmills are used for non-ferrous materials and soft materials like aluminum, brass, copper, silver, and gold. A uncoated endmill is for longer life on aluminum or sticky material machining.  The large core diameter is more stable  A negative rake angle design enhances the rigidity of the tool TF25 carbide rod for soft material.
2.5 mm 4 flute Ballnose 55 hrc pack of 1
2.5 mm 4 flute Ballnose 55 hrc pack of 1
Tabikut 2.5 mm 4 flute Ballnose 55 ... ₹ 236.00
4 Flutes Ballnose. Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.  Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable packing Size of Carbide Ballnose 55 Hrc: 3mm The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes if the total length increase flute length remains the same double diameter
2.5 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1
2.5 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1
Tabikut 2.5 mm Carbide ballnose 65 ... ₹ 584.00
2.5 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1check 2nd image for dimensions  65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size. Helix Angel of 35 degree, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM 2 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns
Sold out
2.5 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1
2.5mm Solid Carbide Ball nose
2.5mm Carbide Endmill
Carbide Ballnose 65 HRC
Tabikut 2.5 mm Carbide Endmill 65 H... ₹ 584.00
2.5 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1check 2nd image for dimensions  65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size. Helix Angel of 35 degree, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM 4 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns
2.5mmx75/100 mm long Carbide Endmill 55 HRC PACK OF 1
2.5mmx75/100 mm long Carbide Endmill 55 HRC PACK OF 1
2.5mmx75/100 mm long Carbide Endmill 55 HRC PACK OF 1
Tabikut 2.5mmx75/100 mm long Carbid... ₹ 350.00
Solid Carbide Cutter are used to machine Hard and tough Material , Steel , Alloy Steel , Cast iron , stainless steel and many other material grades.  Bronze TiSiN Coating , Endmill for Better Life and wear resistance.35 Degree Helix Angel , Grain Size 0.5μmUsed for Face Mill , Shoulder mill , side mill etc ,Plastic Packaging for non breakable packing
25.4 mm 1 inch carbide cutter pack of 1
25.4 mm 1 inch carbide cutter pack of 1
25.4 mm 1 inch carbide cutter pack of 1
Tabikut 25.4 mm 1 inch carbide cutt... ₹ 8,120.00
This is 25.4 mm 1 Inch size carbide endmill 4 flutes  60 HRC coated , used for steel stainless steel and cast iron 
2mmx75mm long Carbide Endmill 55 HRC PACK OF 1
2mmx75mm long Carbide Endmill 55 HRC PACK OF 1
Tabikut 2mmx75mm long Carbide Endmi... ₹ 350.00
Solid Carbide Cutter are used to machine Hard and tough Material , Steel , Alloy Steel , Cast iron , stainless steel and many other material grades.  Bronze TiSiN Coating , Endmill for Better Life and wear resistance.35 Degree Helix Angel , Grain Size 0.5μmUsed for Face Mill , Shoulder mill , side mill etc. ,Plastic Packaging for non breakable packing
Sold out
3 MM 2 flute cutter 45/55 hrc pack of 2
3 MM 2 flute cutter 45/55 hrc pack of 2
3 MM 2 flute cutter 45/55 hrc pack of 2
3 MM 2 flute cutter 45/55 hrc pack of 2
3 MM 2 flute cutter 45/55 hrc pack of 2
3 MM 2 flute cutter 45/55 hrc pack of 2
3 MM 2 flute cutter 45/55 hrc pack of 2
3 MM 2 flute cutter 45/55 hrc pack of 2
Tabikut 3 MM 2 flute cutter 45/55 h... from ₹ 236.00
3  mm 2 flute endmill used for 50/75/100 mm long metal and wood ,plastic sheet , less hardened material 
3 mm 4 flute Ballnose 55 hrc pack of 1
3 mm 4 flute Ballnose 55 hrc pack of 1
Tabikut 3 mm 4 flute Ballnose 55 hr... ₹ 236.00
4 Flutes Ballnose. Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.  Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable packing Size of Carbide Ballnose 55 Hrc: 3mm The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes if the total length increase flute length remains the same double diameter
3 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1
3 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1
3 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1
3 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1
3 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1
3 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1
3 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1
3 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1
Tabikut 3 mm Carbide ballnose 65 HR... from ₹ 585.00
3 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1check 2nd image for dimensions  65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size. Helix Angel of 35 degree, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM 2 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns
3 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1
Carbide 65 HRC Endmill
3 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1
3mm Carbide Endmill
3 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1
3 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1
3 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1
3 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1
Tabikut 3 mm Carbide Endmill 65 HRC... from ₹ 584.00
3 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1check 2nd image for dimensions  65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size. Helix Angel of 35 degrees, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM 4 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns
3 mm unocated endmill pack of 2
Tabikut 3 mm unocated endmill pack ... ₹ 295.00
2/3/4 Flute uncoated Carbide Endmills are used for non-ferrous materials and soft materials like aluminum, brass, copper, silver, and gold. A uncoated endmill is for longer life on aluminum or sticky material machining.  The large core diameter is more stable  A negative rake angle design enhances the rigidity of the tool TF25 carbide rod for soft material.

GST Input Credit

Get Business Invoice and get 100% GST Input Credit for your Order.

7-Day Return

If you receive defective Product, return it within 7 Days and Get 100% refund.

Lowest Prices

We are offering Products at Lowest Prices in the Industry*.

Highest Quality

We strive to provide best quality product .
Jaibros is a Registered Trademark owned by HAKUNA MATATA RETAIL PRIVATE LIMITED 2009-