Carbide Milling Inserts CARBIDE ENDMILL 55 HRC Carbide Ballnose 55 HRC Carbide Turning Insert Carbide Drilling Inserts Carbide Threading insert Carbide Ballnose 45 HRC Carbide Micro Endmill Ballnose Carbide Endmill 60 HRC Carbide Ballnose 60 HRC DEAL Carbide Single Flute Cutters Carbide Endmill 45 HRC Carbide Grooving Insert Carbide PCD insert Rib Cutter Roughing Cutter Corner Radius Endmill DLC 3 Flute Cutter CARBIDE ENDMILL 65 HRC WOOD CUTTER Taper Ballnose Chamfer Cutter Insert Cermet Turning Inserts CBN Insert CARBIDE INSERT Multifunction Drill 2 flute carbide cutter Carbide Ballnose 65 HRC Ballnose 4 Flute Uncoated End & Ball 6 Flute Endmill HRC63 Nano Coated Indexable Cutters Carbide Drills
Back to all products Tabikut
All products 5 & 6 Flute Endmills Accessories Accessories APP Accessories APP 2 All Ballnose (45 HRC) Ballnose (55 HRC) Ballnose (60 HRC) Ballnose (65 HRC) Ballnose (65 HRC) Ballnose (Inserted) Ballnose - 45 HRC Ballnose - 55 HRC Ballnose - 55 HRC 1 Ballnose - 60 HRC Ballnose - 60 HRC 1 Ballnose 4 Flute (55HRC) BBT40 Holders Boring Heads BPT BT-30 Type BT-40 BCA BT-40 Type Carbide Cutters Carbide Cutters Carbide Drills CARBIDE15 CBN Inserts Ceramic Ceratizit Cermet Chamfer Cutter Chamfering Collet Chucks Collet Chuks Collet ER Types Collets - ER Type Corner Radius Endmill Cutters High Feed Cylindrical Chuks Cylndrical Chuck Dasqua Deal of the Day Deskar Dijet Drill Chuck - Keyless Drilling Insert Duracarb Edge Finders Endmill (3 Flute) DLC Endmill (45 HRC) Endmill (55 HRC) 1 Endmill (60 HRC) Endmill (65 HRC) Endmill (Inserted) Endmill - 45 HRC Endmill - 55 HRC Endmill - 55 HRC 1 Endmill - 60 HRC Endmill - 60 HRC 1 Endmill 2 Flute Endmill Ballnose - Micro ER Collets ER Nuts ER Spanners ER Tap Collets Find the Edge Gauges Grooving Inserts Grooving Work Heads - Boring High Feed Hitachi HRC63(Nano Coated) Indexable Cutters Inserted Ballnose Inserted Cutters Inserted Endmill Inserts INSERTS15 ISO40 Holders Jaibros JXD Keyless Drill Chuck Knob - Pull Studs Knob- Pull Studs Korloy Korloy Kyocera Life Locking Device Long Neck Cutters Mars-Tech Measurings Metrology Micro Drills Micro Endmill Ballnose Milling Inserts Milling Opertations Miscellaneous Mitsubishi Multifunction Tools Non Standard Endmills Non-Ferrous Nuts - ER Nuts ER PCD Inserts Promo Inserts Pull Studs Rougher Endmills Single Flute Endmill SK-40 Type Spanner - ER Spanners - ER Straight Shank Chucks Tabikut Tabikut Inserts TaeguTec Threading Application Threading Inserts Tool Boy Tools Boy Torx Keys Torx Screws TURNING Turning Holders Turning Inserts Turning Usage U Drill Uncoated End & Ball volume discount Wholesale Deals Widia Yuzuki Z Setter ZCCCT Zero Pre Setter Zero Setter
1 MM 2 flute cutter 45 hrc pack of 2
1 MM 2 flute cutter 45 hrc pack of 2
1 MM 2 flute cutter 45 hrc pack of 2
Tabikut 1 MM 2 flute cutter 45 hrc ... from ₹ 200.00
1  mm 2 flute endmill used for 50 metal and wood ,plastic sheet , less hardened material 
1 mm 4 flute Ballnose 55 hrc pack of 1
1 mm 4 flute Ballnose 55 hrc pack of 1
Tabikut 1 mm 4 flute Ballnose 55 hr... ₹ 236.00
4 Flutes Ballnose. Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.  Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable packing Size of Carbide Ballnose 55 Hrc: 1mm The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes if the total length increase flute length remains the same double diameter
1 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1
1 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1
Tabikut 1 mm Carbide ballnose 65 HR... ₹ 584.00
1 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1check 2nd image for dimensions  65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size. Helix Angel of 35 degree, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM 2 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns
1 mm endmill uncoated in 6/4 mm shank pack of 1
1 mm endmill uncoated in 6/4 mm shank pack of 1
Tabikut 1 mm endmill uncoated in 6/... ₹ 450.00
2/3/4 Flute uncoated Carbide Endmills are used for non-ferrous materials and soft materials like aluminum, brass, copper, silver, and gold. A uncoated endmill is for longer life on aluminum or sticky material machining.  The large core diameter is more stable  A negative rake angle design enhances the rigidity of the tool TF25 carbide rod for soft material.
1.5 mm 4 flute Ballnose 55 hrc pack of 1
1.5 mm 4 flute Ballnose 55 hrc pack of 1
Tabikut 1.5 mm 4 flute Ballnose 55 ... ₹ 236.00
4 Flutes Ballnose. Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.  Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable packing Size of Carbide Ballnose 55 Hrc: 1.5mm The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes if the total length increase flute length remains the same double diameter
1.5 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1
1.5 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1
Tabikut 1.5 mm Carbide ballnose 65 ... ₹ 584.00
1.5 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1check 2nd image for dimensions  65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size. Helix Angel of 35 degree, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM 2 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns
1.5 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1
1.5mm Carbide Endmill
Carbide End mill
Tabikut 1.5 mm Carbide Endmill 65 H... ₹ 584.00
1.5 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1check 2nd image for dimensions  65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size. Helix Angel of 35 degrees, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM 4 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns
10 MM 2 flute cutter in 10 mm shank 45/55 hrc pack of 1
10 MM 2 flute cutter in 10 mm shank 45/55 hrc pack of 1
10 MM 2 flute cutter in 10 mm shank 45/55 hrc pack of 1
10 MM 2 flute cutter in 10 mm shank 45/55 hrc pack of 1
10 MM 2 flute cutter in 10 mm shank 45/55 hrc pack of 1
10 MM 2 flute cutter in 10 mm shank 45/55 hrc pack of 1
Tabikut 10 MM 2 flute cutter in 10 ... from ₹ 873.00
metal and wood ,plastic sheet , less hardened material
10 mm 4 flute Ballnose 55 hrc pack of 1
10 mm 4 flute Ballnose 55 hrc pack of 1
Tabikut 10 mm 4 flute Ballnose 55 h... ₹ 1,195.00
4 Flutes Ballnose. Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.  Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable packing Size of Carbide Ballnose 55 Hrc: 3mm The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes if the total length increase flute length remains the same double diameter
10 mm 6 flute cutter hrc63 nano coating pack of 1
10 mm 6 flute cutter hrc63 nano coating pack of 1
Tabikut 10 mm 6 flute cutter hrc63 ... from ₹ 1,150.00
CARBIDE ENDMILL 6 FLUTES  75 mm long flute length 25 mm  Can be used on STEEL , STAINLESS STEEL  , CAST IRON , GENERAL MACHINING  USED FOR FINISHING OPERATION.  
10 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1
10 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1
10 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1
10 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1
Tabikut 10 mm Carbide ballnose 65 H... from ₹ 2,561.00
10 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1check 2nd image for dimensions  65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size. Helix Angel of 35 degree, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM 2 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns
10 mm Carbide Endmill 65 HRC 4 Flutes LONG PACK OF 1
10mm Dia Carbide Cutter
10mm Carbide Endmill
10 mm Carbide Endmill 65 HRC 4 Flutes LONG PACK OF 1
10 mm Carbide Endmill 65 HRC 4 Flutes LONG PACK OF 1
Tabikut 10 mm Carbide Endmill 65 HR... from ₹ 2,655.00
10 mm Carbide Endmill 65 HRC 4 Flutes10X75/100 LONG  PACK OF 1check 2nd image for dimensions  65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size. Helix Angel of 35 degrees, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM 4 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns
10 mm Endmill 4 flute different flute length and total length pack of 1
10 mm Endmill 4 flute different flute length and total length pack of 1
10 mm Endmill 4 flute different flute length and total length pack of 1
Tabikut 10 mm Endmill 4 flute diffe... from ₹ 1,440.00
HRC63 Nano Coating is used for hard cutting and its better life than HRC55 cutters.  Nano coating is for higher wear resistance high rigidity, widely used in shallow slot, profile milling, and finish machining
10 mm Uncoated endmill pack of 1
10 mm Uncoated endmill pack of 1
10 mm Uncoated endmill pack of 1
10 mm Uncoated endmill pack of 1
Tabikut 10 mm Uncoated endmill pack... from ₹ 1,100.00
2/3/4 Flute uncoated Carbide Endmills are used for non-ferrous materials and soft materials like aluminum, brass, copper, silver, and gold. A uncoated endmill is for longer life on aluminum or sticky material machining.  The large core diameter is more stable  A negative rake angle design enhances the rigidity of the tool TF25 carbide rod for soft material.
11 MM 2 flute cutter in 12 mm shank 45/55 hrc pack of 1
11 MM 2 flute cutter in 12 mm shank 45/55 hrc pack of 1
Tabikut 11 MM 2 flute cutter in 12 ... from ₹ 873.00
FLUTE LENGTH 35 MM  metal and wood ,plastic sheet , less hardened material
12 MM 2 flute cutter in 12 mm shank 45/55 hrc pack of 1
12 MM 2 flute cutter in 12 mm shank 45/55 hrc pack of 1
12 MM 2 flute cutter in 12 mm shank 45/55 hrc pack of 1
12 MM 2 flute cutter in 12 mm shank 45/55 hrc pack of 1
12 MM 2 flute cutter in 12 mm shank 45/55 hrc pack of 1
12 MM 2 flute cutter in 12 mm shank 45/55 hrc pack of 1
12 MM 2 flute cutter in 12 mm shank 45/55 hrc pack of 1
Tabikut 12 MM 2 flute cutter in 12 ... from ₹ 873.00
metal and wood ,plastic sheet , less hardened material
12 mm 4 flute Ballnose 55 hrc pack of 1
12 mm 4 flute Ballnose 55 hrc pack of 1
Tabikut 12 mm 4 flute Ballnose 55 h... ₹ 1,672.00
4 Flutes Ballnose. Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.  Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable packing Size of Carbide Ballnose 55 Hrc: 12 mm The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes if the total length increase flute length remains the same double diameter
12 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1
12 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1
12 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1
12 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1
Tabikut 12 mm Carbide ballnose 65 H... from ₹ 3,360.00
12 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1 check 2nd image for dimensions  65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size. Helix Angel of 35 degree, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM 2 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns
12 mm Carbide Endmill 65 HRC 4 Flutes LONG PACK OF 1
Carbide Ball nose 55 HRC
12mm Solid Carbide Tools
12 mm Carbide Endmill 65 HRC 4 Flutes LONG PACK OF 1
12 mm Carbide Endmill 65 HRC 4 Flutes LONG PACK OF 1
Tabikut 12 mm Carbide Endmill 65 HR... from ₹ 3,469.00
12 mm Carbide Endmill 65 HRC 4 Flutes 12X75 -12x100 LONG PACK OF 1check 2nd image for dimensions  65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size. Helix Angel of 35 degree, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM 4 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns
12 mm Endmill 4 flute different flute length and total length pack of 1
12 mm Endmill 4 flute different flute length and total length pack of 1
12 mm Endmill 4 flute different flute length and total length pack of 1
Tabikut 12 mm Endmill 4 flute diffe... from ₹ 1,951.00
HRC63 Nano Coating is used for hard cutting and its better life than HRC55 cutters.  Nano coating is for higher wear resistance high rigidity, widely used in shallow slot, profile milling, and finish machining

GST Input Credit

Get Business Invoice and get 100% GST Input Credit for your Order.

7-Day Return

If you receive defective Product, return it within 7 Days and Get 100% refund.

Lowest Prices

We are offering Products at Lowest Prices in the Industry*.

Highest Quality

We strive to provide best quality product .
Jaibros is a Registered Trademark owned by HAKUNA MATATA RETAIL PRIVATE LIMITED 2009-