8 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1
Related Products
![8 mm Carbide Ballnose 60 HRC](http://jaibros.com/cdn/shop/products/8mmCarbideBallnose_375x.jpg?v=1649674584 375w,//jaibros.com/cdn/shop/products/8mmCarbideBallnose_410x.jpg?v=1649674584 410w,//jaibros.com/cdn/shop/products/8mmCarbideBallnose_520x.jpg?v=1649674584 520w,//jaibros.com/cdn/shop/products/8mmCarbideBallnose_576x.jpg?v=1649674584 576w,//jaibros.com/cdn/shop/products/8mmCarbideBallnose_768x.jpg?v=1649674584 768w,//jaibros.com/cdn/shop/products/8mmCarbideBallnose_992x.jpg?v=1649674584 992w,//jaibros.com/cdn/shop/products/8mmCarbideBallnose_1024x.jpg?v=1649674584 1024w,//jaibros.com/cdn/shop/products/8mmCarbideBallnose_1280x.jpg?v=1649674584 1280w)
Tabikut
8 mm Carbide Ballnose 60 HR...
₹ 974.00
8 mm Carbide Ballnose 60 HRC PACK OF 1Ballnose are 2 flutes and Endmills are 4 flutes
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing
55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS DIFFERENCE IN QUALITY AND MATERIAL, 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL
![8 Mm Carbide Ballnose 55 HRC 2 Flutes ,Shank 8 MM Flute Length 16 Mm Total Length Is 60/75/100/150/200 Mm](http://jaibros.com/cdn/shop/files/JBRS0540_375x.png?v=1711018319 375w,//jaibros.com/cdn/shop/files/JBRS0540_410x.png?v=1711018319 410w,//jaibros.com/cdn/shop/files/JBRS0540_520x.png?v=1711018319 520w,//jaibros.com/cdn/shop/files/JBRS0540_576x.png?v=1711018319 576w,//jaibros.com/cdn/shop/files/JBRS0540_768x.png?v=1711018319 768w,//jaibros.com/cdn/shop/files/JBRS0540_992x.png?v=1711018319 992w,//jaibros.com/cdn/shop/files/JBRS0540_1024x.png?v=1711018319 1024w,//jaibros.com/cdn/shop/files/JBRS0540_1280x.png?v=1711018319 1280w)
Tabikut
8 Mm Carbide Ballnose 55 HR...
from ₹ 632.00
8 mm Carbide Ballnose 55 HRC 2 Flutes, Shank 8 MM Flute Length 16 Mm Total Length Is 60/75/100/150/200 MmSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing
The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes, if the total length increase flute length remains the same as the double diameter.