Thumbnail for 2 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1

2 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1

Brand - Tabikut

₹ 584.00

SKU: JBRS3170

0 LEFT IN STOCK

Get Rs.50 Off on Prepaid Orders above Rs.500 via Razorpay Gateway. (Discount will be applied During Checkout at Payment Gateway) (No Code Required)

Product description

2 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1

check 2nd image for dimensions

65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size.

Helix Angel of 35 degree, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM

2 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns

Products are usually delivered in 3-7 days depending upon your location.

0 have this item in their cart.

Related Product

2 mm Carbide Ballnose 2FLUTES/ 45 HRC PACK OF 2

Tabikut 2 mm Carbide Ballnose 2FLUT... ₹ 293.00

BALLNOSE ARE 2 FLUTES ONLY. Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Wine Coating TiALin Coating, Endmill for Better Life and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable. Pack of 1 means Qty. 1 Pack of 2 means price is for 2 nos.

Tabikut 2 Mm Carbide Ballnose 55 HR... ₹ 434.00

Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel , Cast iron , stainless steel and many other material grades. Bronze TiSiN Coating , Endmill for Better Life and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc. plastic Packaging for non-breakable packing The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes if the total length increase flute length remains the same as the double diameter.

Tabikut 2 Mm Carbide Ballnose 60 HR... ₹ 531.00

UPTO 6 MM 50 mm Length price is for 2 Nos. If you order 1 quantity you will get 2 pcs 460 rs. price is for 2 nos. 1 will cost 230 rs. only. Ballnose are 2 flutes and Endmills are 4 flutes Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. .Bronze TiSiN Coating, Endmill for Better Life, and wear resistance35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing 55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS DIFFERENCE IN QUALITY AND MATERIAL, 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL

Related Products

Tabikut 2 mm Carbide Ballnose 2FLUT... ₹ 293.00

BALLNOSE ARE 2 FLUTES ONLY. Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Wine Coating TiALin Coating, Endmill for Better Life and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable. Pack of 1 means Qty. 1 Pack of 2 means price is for 2 nos.

Tabikut 2 Mm Carbide Ballnose 55 HR... ₹ 434.00

Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel , Cast iron , stainless steel and many other material grades. Bronze TiSiN Coating , Endmill for Better Life and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc. plastic Packaging for non-breakable packing The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes if the total length increase flute length remains the same as the double diameter.

Tabikut 2 Mm Carbide Ballnose 60 HR... ₹ 531.00

UPTO 6 MM 50 mm Length price is for 2 Nos. If you order 1 quantity you will get 2 pcs 460 rs. price is for 2 nos. 1 will cost 230 rs. only. Ballnose are 2 flutes and Endmills are 4 flutes Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. .Bronze TiSiN Coating, Endmill for Better Life, and wear resistance35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing 55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS DIFFERENCE IN QUALITY AND MATERIAL, 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL

They are must-haves