ARBOR
CYLINDRICAL COLLET CHUCK
DRILL CHUCK
EDGE FINDER
ER COLLET
ER Collets
ER NUT
ER SPANNER
ER TAP COLLET
Hydraulic Collet
LOCKING DEVICE
Metrology
PULL STUDS
TORX KEY
TORX KEY HANDLE
TORX KEY HP
TORX SCREW (GREY)
TORX SCREW (HP)
TORX SCREW (NORMAL)
TORX SCREW (UHP)
UHP ER COLLET
Z setter
All products
Accessories
Accessories APP
Accessories APP 2
All
Ballnose (45 HRC)
Ballnose (55 HRC)
Ballnose (60 HRC)
Ballnose (65 HRC)
Ballnose (65 HRC)
Ballnose (Inserted)
Ballnose - 45 HRC
Ballnose - 55 HRC
Ballnose - 55 HRC 1
Ballnose - 60 HRC
Ballnose - 60 HRC 1
Ballnose 4 Flute (55HRC)
BBT40 Holders
Boring Heads
BPT
BT-30 Type
BT-40 BCA
BT-40 Type
Carbide Cutters
Carbide Cutters
Carbide Drills
CARBIDE15
CBN Inserts
Ceramic
Ceratizit
Cermet
Chamfer Cutter
Chamfering
Collet Chucks
Collet Chuks
Collet ER Types
Collets - ER Type
Corner Radius Endmill
Cutters High Feed
Cylindrical Chuks
Cylndrical Chuck
Dasqua
Deal of the Day
Deskar
Dijet
Drill Chuck - Keyless
Drilling Insert
Duracarb
Edge Finders
Endmill (3 Flute) DLC
Endmill (45 HRC)
Endmill (55 HRC) 1
Endmill (60 HRC)
Endmill (65 HRC)
Endmill (Inserted)
Endmill - 45 HRC
Endmill - 55 HRC
Endmill - 55 HRC 1
Endmill - 60 HRC
Endmill - 60 HRC 1
Endmill 2 Flute
Endmill Ballnose - Micro
ER Collets
ER Nuts
ER Spanners
ER Tap Collets
Find the Edge
Gauges
Grooving Inserts
Grooving Work
Heads - Boring
High Feed
Hitachi
Indexable Cutters
Inserted Ballnose
Inserted Cutters
Inserted Endmill
Inserts
INSERTS15
ISO40 Holders
Jaibros
JXD
Keyless Drill Chuck
Knob - Pull Studs
Knob- Pull Studs
Korloy
Korloy
Kyocera
Life
Locking Device
Long Neck Cutters
Mars-Tech
Measurings
Metrology
Micro Endmill Ballnose
Milling Inserts
Milling Opertations
Miscellaneous
Mitsubishi
Multifunction Tools
Non Standard Endmills
Non-Ferrous
Nuts - ER
Nuts ER
PCD Inserts
Promo Inserts
Pull Studs
Rougher Endmills
Single Flute Endmill
SK-40 Type
Spanner - ER
Spanners - ER
Straight Shank Chucks
Tabikut
Tabikut Inserts
TaeguTec
Threading Application
Threading Inserts
Tool Boy
Tools Boy
Torx Keys
Torx Screws
TURNING
Turning Holders
Turning Inserts
Turning Usage
U Drill
Uncoated End & Ball
Widia
Yuzuki
Z Setter
ZCCCT
Zero Pre Setter
Zero Setter
Mars-Tech
Ultra Precision Screw 2mm x...
₹ 295.00
These are best ultra precision screw of MARS-TECH compare to any brand in the market
Mars-Tech
ER 32 COLLET SET 1 MM TO 20...
₹ 7,015.00
THIS SET HAS 20 COLLETS 1 MM TO 20 MM EACH 1 NOS. PACKED IN PLASTIC BOX
The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50.
ER32 series collets have a capacity of 1mm-20mm. Each ER32 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER32-6mm can grab a round shank from 6mm diameter to 5.1mm diameter.
Mars-Tech
BT40 to ISO40 Adapter
₹ 481.00
The BT40 to ISO40 Adapter allows the machinist to use the same CNC holder in a conventional ISO40 machine by simply changing the retention knob/pull stud for this cheap but effective adapter. So instead of buying a new holder, you just purchase the OTT retention knob/pull stud and exchange the pull stud to convert the holder from BT40 to a standard SK holder for a conventional machine.
REAR THREAD M16X2
Mars-Tech
BT30 Locking Device Tool Bo...
₹ 2,227.00
BT30 Locking Device Tool Boy , Bt30 Fixture Clamping Fixture Of Bt30BT30 Locking device with Vertical and Horizontal modes to tighten Nut and Pull studs made of Steel and long life. cone for taper is made of aluminium. 3.5 kgs of 1 pc.
Mars-Tech
ER16 Collet set 1 mm to 10 ...
₹ 2,660.00
THIS SET HAS 10 COLLETS 1 MM TO 10 MM EACH 1 NOS.
The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50.
ER32 series collets have a capacity of 1mm-20mm. Each ER32 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER32-6mm can grab a round shank from 6mm diameter to 5.1mm diameter.
Dasqua
DASQUA Digital zero setter ...
₹ 7,363.00
DIGITAL ZERO SETTING DEVICE
With magnetic base.
To adjust the tools to the 0-position to determine the reference point of the machine spindle.
No feeler gauge or starting contact is needed.
Spring loaded setting face.
Mechanical zero-setting instrument for CNC machine centers.
Low spring force to prevent cutting tool from damage.
1809-1005
Jaibros
Edge Finder and Center Find...
₹ 1,769.00
Edge Finder and Center finder for small hole
tool presetter for Z Y axis
High Quality Low price , Make In India product.
Center & edge finder set sizes as under " Edge finder set - 8 pcs set - in a pouch packing 1. 1/2" .5000" plain edge finder single end 2. 1/2" .2000" edge finder single end 3. 3/8" .2000" edge finder single end 4. 1/2" cone hole center finder single end 5. 3/8" cone hole center finder single end 6. 1/2" .2000" edge finder double end 7. 3/8" .2000" cone center finder double end 8. 1/2" .5000" cone center finder double end Made from precision ground hardened tool steel.
Mars-Tech
Ultra Precision Screw 4.5mm...
₹ 295.00
These are best ultra precision screw of MARS-TECH compare to any brand in the market
Mars-Tech
ER8 Ccollet DIN6499B AA 0....
₹ 590.00
The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.005 micron or less. ,ER collet sizes start at ER8 through ER50.
ER8 series collets have a capacity of 1mm-5mm. Each ER8 collet has a range of (0.5mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.5mm). For example, ER8-3mm can grab a round shank from 3mm diameter to 2.5mm diameter.
Mars-Tech
Mars-Tech Torx Key T9 high ...
₹ 413.00
T9 hardened Torx key t-type style small size.
This key can be used for the T9 size of screw most screws used for this size are rare it can be 3 mm or 2.5 mm
Quantity 1 means 10 pcs
Mars-Tech
Torx Screw 1.6X4mm Hp Pack ...
₹ 236.00
Hardened Star Torx Screw for Milling Cutters offered are screws that come with precision design and constructed standards ,These torx screw are hardened upto 50-55 hrc for wear resistance, These Torx screw are mainly used in indexable tools as Boring bar , Insert cutter , milling cutter ,They are precise screw for better grip of carbide insert with pocket
Mars-Tech
Torx Screw 6 MM T25 High Pr...
₹ 236.00
Hardened Star Torx Screw for Milling Cutters offered are screws that come with precision design and constructed standards ,These torx screw are hardened upto 50-55 hrc for wear resistance, These Torx screw are mainly used in indexable tools as Boring bar , Insert cutter , milling cutter ,They are precise screw for better grip of carbide insert with pocket
Mars-Tech
Z setter 50 mm analog type ...
₹ 6,319.00
Z SETTER 50 MM MAGNETIC
Have the central measuing part of the zero setter presetter against a plain surface and aligned if with the outer reference surface. Turn the dial gauge for zero setting. have the cutter touched against the Z zero setter.
Once the indicator positio at zero the distance between the tool tip to workpiece is 50mm, +-0.005 mm
Mars-Tech
CAT/CT 40 Pull Stud In Vari...
₹ 192.00
CT/CAT40 Pull stud used in CNC machines for CAT40 holders ISO standard name is MAS403 Pull studs are an important link between machine and tool. The requirements concerning accuracy, rigidity and reliability are very high. Pull studs of minor quality not only decrease the performance of the machine, they are even a safety risk. A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons. made of special steel for higher rigidity proper heat treated ,
YL
Keyless Drill Chuck 0.3-13m...
₹ 3,700.00
RANGE FROM 0.3 TO 13 MM
HEAVY DUTY WITH YELLOW TITANIUM COATED JAWS.
YL Heavy Duty Keyless Drill chucks are used for CNC machining center and milling machine
Special Designed & manufactured against for super heavy torque use.
Owning to inspecting strictly & with excellent RUNOUT accuracy and Quality guaranteed the gripping power double than general brand
Avoid the drill dropped when used in instaneous change of direction and equipped with spanner hole for tightening prefect safety.
Accuracy 50 mm Length within 0.05mm
Spanner is optional not included with chuck.
Mars-Tech
ER20M SPANNER TYPE pack of 1
₹ 288.00
ER20M Spanner for ER20 miniature type nut , tighten it and loosen it
Mars-Tech
SK50/DIN69872 Pull Stud Wit...
₹ 421.00
SK50/DIN69872 Pull stud used in CNC machines for BT40 holders ISO standard name is MAS403 Pull studs are an important link between machine and tool. The requirements concerning accuracy, rigidity and reliability are very high. Pull studs of minor quality not only decrease the performance of the machine, they are even a safety risk. A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons. made of special steel for higher rigidity proper heat treated ,
Mars-Tech
BT50 Locking device , BT50 ...
₹ 4,814.00
BT50 locking device BT50 Locking device with Vertical and Horizontal mode to tighten Nut and Pull stud made of Steel and long life. cone for taper is made of aluminium . 10 kgs of 1 pc.
SCODAK
SCODAK Torque control torx ...
₹ 566.00
THESE BITS CAN ONLY BE USED WITH SCODAK torque control screw driver.
you will get 1 pc of bit
Mars-Tech
Mechanical Ceramic Edge Fin...
₹ 1,023.00
ceramic edge finder for magnetic componenet as ceramic is non magnetic
Mechanical Edge Finder also called touch point sensor are used for find Zero point of the workpiece and find center of the hole.