Non Standard Endmills

Tabikut 6 mm Shank 4 mm Endmill 55 ... ₹ 443.00

6 mm Shank 4 mm Endmill 55 HRC Tabikut pack of 1Carbide Endmill-55 HRC SPECIAL SIZE OF 4 MM CUTTING DIA 6 MM SHANK Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Black Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing

Tabikut 6 mm Shank 3 mm Endmill 55 ... ₹ 443.00

6 mm Shank 3 mm Endmill 55 HRC Tabikut pack of 1Carbide Endmill-55 HRC SPECIAL SIZE OF 3 MM CUTTING DIA 6 MM SHANK Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Black Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle , Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing

Tabikut 6 mm Shank 2 mm Endmill 55 ... ₹ 443.00

6 mm Shank 2 mm Endmill 55 HRC Tabikut pack of 1Carbide Endmill-55 HRC SPECIAL SIZE OF 2 MM CUTTING DIA 6 MM SHANK Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Black Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing

Tabikut 6 mm Shank 1 mm Endmill 55 ... ₹ 443.00

6 mm Shank 1 mm Endmill 55 HRC Tabikut pack of 1Carbide Endmill-55 HRC SPECIAL SIZE OF 1MM CUTTING DIA 6 MM SHANK Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Black Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing

Tabikut 7 mm tabikut Carbide Endmil... ₹ 1,003.00

7 mm tabikut Carbide Endmill 55 HRC 4 Flutes Total Length Is 60 MM pack of 17 mm with 8 mm shank 60 mm overall length Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing

Tabikut 11 mm Carbide Endmill 55 HR... ₹ 1,947.00

11 mm Carbide Endmill 55 HRC 4 Flutes Total Length 75mm pack of 111 MM in 12 mm shank 75 mm total length Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing

Tabikut 6 mm Shank 2 mm ballnose 55... ₹ 443.00

6 mm Shank 2 mm ballnose 55 HRC Tabikut pack of 1Carbide Ballnose-55 HRC SPECIAL SIZE OF 2 MM CUTTING DIA 6 MM SHANK Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Black Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle , Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing

Sold out

6mm Shank 3 mm ballnose 4 Flute 55 HRC Tabikut pack of 1

Tabikut 6mm Shank 3 mm ballnose 4 F... ₹ 543.00

4 flute 6 mm Shank 3 mm ballnose 55 HRC Tabikut pack of 1Carbide Ballnose-55 HRC SPECIAL SIZE OF 3 MM CUTTING DIA 6 MM SHANK Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Black Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing

Tabikut 6 mm Shank 3 mm ballnose 55... ₹ 443.00

6 mm Shank 3 mm ballnose 55 HRC Tabikut pack of 1Carbide Ballnose-55 HRC SPECIAL SIZE OF 3 MM CUTTING DIA 6 MM SHANK Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Black Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing

Tabikut 9 mm Carbide Endmill 55 HRC... ₹ 1,699.00

9 mm Carbide Endmill 55 HRC 4 Flutes Total Length 75mm pack of 19 mm endmill with 10 mm shank Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for nonbreakable packing

6mm Shank 1 mm ballnose 4 Flute 55 HRC Tabikut pack of 1

Tabikut 6mm Shank 1 mm ballnose 4 F... ₹ 543.00

4 flute 6 mm Shank 1 mm ballnose 55 HRC Tabikut pack of 1Carbide Ballnose-55 HRC SPECIAL SIZE OF 1 MM CUTTING DIA 6 MM SHANK Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Black Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing

Tabikut 13 mm Carbide Endmill 55 HR... ₹ 2,893.00

13 mm Carbide Endmill 55 HRC 4 Flutes Total Length 100mm pack of 113 MM in 14 mm shank 100 mm total length Solid Carbide Cutter are used to machine Hard and tough Material , Steel , Alloy Steel , Cast iron , stainless steel and many other material grades. Bronze TiSiN Coating , Endmill for Better Life and wear resistance.35 Degree Helix Angel , Grain Size 0.5μmUsed for Face Mill , Shoulder mill , side mill etc ,Plastic Packaging for non breakable packing

6 mm Shank Endmill with 0.3 mm corner radius 55 HRC Tabikut pack of 1

Tabikut 6 mm Shank Endmill with 0.3... ₹ 343.00

Corner radius of 0.3 mm Carbide Endmill-55 HRC SPECIAL SIZE OF 3/4/5 MM CUTTING DIA 6 MM SHANK All have cutting length of 10 mm , All size are 0.3 mm Corner Radius Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Black Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle , Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing

Tabikut EXTRA LONG Endmills PACK OF 1 from ₹ 802.00

EXTRA LONG ENDMILL ALL ARE IN HRC63 NANO COATING. Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Black Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle , Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing

2.5 mm in 6 mm Shank Endmill 55 HRC Tabikut pack of 1

Tabikut 2.5 mm in 6 mm Shank Endmil... ₹ 443.00

6 mm Shank 2.5 mm Endmill 55 HRC Tabikut pack of 1Carbide Endmill-55 HRC SPECIAL SIZE OF 2 MM CUTTING DIA 6 MM SHANK Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Black Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing

5.5 mm Endmill 55 HRC 4 Flutes Total Length Is 75 MM pack of 1

Tabikut 5.5 mm Endmill 55 HRC 4 Flu... ₹ 1,200.00

5.5 mm tabikut Carbide Endmill 55 HRC 4 Flutes Total Length Is 50 MM pack of 15.5 mm with 6 mm shank 50 mm overall length 15 mm flute length Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing

6.5 mm Endmill 55 HRC 4 Flutes Total Length Is 60 MM pack of 1

Tabikut 6.5 mm Endmill 55 HRC 4 Flu... ₹ 1,200.00

6.5 mm tabikut Carbide Endmill 55 HRC 4 Flutes Total Length Is 60 MM pack of 16.5 mm with 8 mm shank 60 mm overall length 20 mm flute length Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing

6mm Shank 4 mm ballnose 4 Flute 55 HRC Tabikut pack of 1

Tabikut 6mm Shank 4 mm ballnose 4 F... ₹ 543.00

4 flute 6 mm Shank 2.5 mm ballnose 55 HRC Tabikut pack of 1Carbide Ballnose-55 HRC SPECIAL SIZE OF 2.5 MM CUTTING DIA 6 MM SHANK Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Black Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing

Tabikut 6 mm Shank 2.5 mm ballnose ... ₹ 443.00

6 mm Shank 2.5 mm ballnose 55 HRC Tabikut pack of 1Carbide Ballnose-55 HRC SPECIAL SIZE OF 2 MM CUTTING DIA 6 MM SHANK Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Black Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing

5 mm Endmill long flute length 55 HRC 4 Flutes Total Length Is 75 MM pack of 1

Tabikut 5 mm Endmill long flute len... ₹ 1,210.00

5 mm with 30 mm flute length 6 mm shank 75 mm overall length Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing