All products
5 & 6 Flute Endmills
Accessories
Accessories APP
Accessories APP 2
All
Ballnose (45 HRC)
Ballnose (55 HRC)
Ballnose (60 HRC)
Ballnose (65 HRC)
Ballnose (Inserted)
Ballnose 4 Flute (55HRC)
BBT40 Holders
Boring Heads
BPT
BT-30 Type
BT-40 BCA
BT-40 Type
Carbide Cutters
Carbide Drills
Carbide Inserts
CARBIDE15
CBN Inserts
Ceramic
Ceratizit
Cermet Inserts
Chamfer Cutter
Collet Chucks
Collet Chuks
Corner Radius Endmill
Cylndrical Chucks
Dasqua
Deals
Deskar
Dijet
Drilling Insert
Duracarb
Edge Finders
Endmill (3 Flute) DLC
Endmill (45 HRC)
Endmill (65 HRC)
Endmill (Inserted)
Endmill - 55 HRC
Endmill - 60 HRC
Endmill 2 Flute
ER Collets
ER Nuts
ER Spanners
ER Tap Collets
Find the Edge
Gauges
Grooving Inserts
Grooving Work
High Feed Cutter
Hitachi
HRC63(Nano Coated)
Indexable Cutters
Inserted Cutters
INSERTS15
ISO40 Holders
Jaibros
JXD
Keyless Drill Chuck
Korloy
Korloy
Kyocera
Life
Locking Device
Long Neck Cutters
Machine Tools & Accessories
Mars-Tech
Measurings
Metrology
Micro Drills
Micro Endmill Ballnose
Milling Inserts
Milling Opertations
Miscellaneous
Mitsubishi
Multifunction Tools
Non Standard Endmills
Non-Ferrous Inserts
PCD Inserts
Promo Inserts
Pull Studs
Rougher Endmills
Single Flute Endmill
SK-40 Type
Straight Shank Chucks
Tabikut
Tabikut Inserts
TaeguTec
Threading Application
Threading Inserts
Tool Boy
Tools Boy
Torx Keys
Torx Screws
TURNING
Turning Holders
Turning Inserts
Turning Usage
U Drill
Uncoated End & Ball
volume discount
Wholesale Deals
Widia
Yuzuki
ZCCCT
Zero Setter
Mars-Tech
BT40 Pull Stud In Various D...
from ₹ 132.00
BT40 Pull stud used in CNC machines for BT40 holders ISO standard name is MAS403 Pull studs are an important link between machine and tool. The requirements concerning accuracy, rigidity and reliability are very high. Pull studs of minor quality not only decrease the performance of the machine, they are even a safety risk. A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons. made of special steel for higher rigidity proper heat treated ,
Mars-Tech
BT30 pull stud in various d...
₹ 144.00
BT30 pull stud in various degree with hole and without holeBT30 Pull studs are used in CNC machines for BT40 holders ISO standard name is MAS403 Pull studs are an important link between machine and tool. The requirements concerning accuracy, rigidity, and reliability are very high. Pull studs of minor quality not only decrease the performance of the machine but are also even a safety risk. A breaking pull stud might cause severe damage to the machine and workpiece and even injuries to persons. made of special steel for higher rigidity properly heat treated,
Mars-Tech
SK40/DIN69872 Pull Stud Wit...
from ₹ 181.00
SK40/DIN69872 Pull stud used in CNC machines for BT40 holders ISO standard name is MAS403 Pull studs are an important link between machine and tool. The requirements concerning accuracy, rigidity and reliability are very high. Pull studs of minor quality not only decrease the performance of the machine, they are even a safety risk. A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons. made of special steel for higher rigidity proper heat treated ,
Mars-Tech
BT50 Pull Stud In Various D...
from ₹ 361.00
BT50 Pull stud used in CNC machines for BT40 holders ISO standard name is MAS403 Pull studs are an important link between machine and tool. The requirements concerning accuracy, rigidity and reliability are very high. Pull studs of minor quality not only decrease the performance of the machine, they are even a safety risk. A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons. made of special steel for higher rigidity proper heat treated ,
Mars-Tech
MAZAK BT40 Pull Stud With H...
₹ 181.00
Mazak BT40 SK40 Pull stud used in CNC machines for BT40 holders ISO standard name is MAS403 Pull studs are an important link between machine and tool. The requirements concerning accuracy, rigidity and reliability are very high. Pull studs of minor quality not only decrease the performance of the machine, they are even a safety risk. A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons. made of special steel for higher rigidity proper heat treated ,
Mars-Tech
BT40 to ISO40 Adapter
₹ 481.00
The BT40 to ISO40 Adapter allows the machinist to use the same CNC holder in a conventional ISO40 machine by simply changing the retention knob/pull stud for this cheap but effective adapter. So instead of buying a new holder, you just purchase the OTT retention knob/pull stud and exchange the pull stud to convert the holder from BT40 to a standard SK holder for a conventional machine.
REAR THREAD M16X2
Mars-Tech
CAT/CT 40 Pull Stud In Vari...
₹ 192.00
CT/CAT40 Pull stud used in CNC machines for CAT40 holders ISO standard name is MAS403 Pull studs are an important link between machine and tool. The requirements concerning accuracy, rigidity and reliability are very high. Pull studs of minor quality not only decrease the performance of the machine, they are even a safety risk. A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons. made of special steel for higher rigidity proper heat treated ,
Mars-Tech
SK50/DIN69872 Pull Stud Wit...
₹ 421.00
SK50/DIN69872 Pull stud used in CNC machines for BT40 holders ISO standard name is MAS403 Pull studs are an important link between machine and tool. The requirements concerning accuracy, rigidity and reliability are very high. Pull studs of minor quality not only decrease the performance of the machine, they are even a safety risk. A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons. made of special steel for higher rigidity proper heat treated ,
Mars-Tech
BT50 to ISO50 Adapter
₹ 630.00
The BT50 to ISO50 Adapter allows the machinist to use the same CNC holder in a conventional ISO0 machine by simply changing the retention knob/pull stud for this cheap but effective adapter. So instead of buying a new holder, you just purchase the OTT retention knob/pull stud and exchange the pull stud to convert the holder from BT50 to a standard SK holder for a conventional machine.
REAR THREAD M24
Mars-Tech
MAZAK SK40 Pull Stud With H...
₹ 181.00
Mazak SK40 Pull stud used in CNC machines for BT40 holders ISO standard name is MAS403 Pull studs are an important link between machine and tool. The requirements concerning accuracy, rigidity and reliability are very high. Pull studs of minor quality not only decrease the performance of the machine, they are even a safety risk. A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons. made of special steel for higher rigidity proper heat treated ,
Mars-Tech
JIS7388/2/B-1983 PULL STUD ...
₹ 300.00
This is a special pull stud kindly check 2nd image for technical details