Jaibros Mars-Tech
-50% sale
Mars-Tech Mechanical Edge Finder 10x4 mm ₹ 165.00 ₹ 330.00
Mechanical Edge Finder also called touch point sensor are used for find Zero point of the workpiece and find center of the hole.
-50% sale
Mars-Tech Mechanical Edge Finder 10x10 MM ₹ 165.00 ₹ 330.00
Mechanical Edge Finder also called touch point sensor are used for find Zero point of the workpiece and find center of the hole.
-22% sale
Jaibros Marking Block lathe with LED light 12 inch ₹ 780.00 ₹ 1,000.00
This work same as gauge but with an LED Batteries not included Led will lighten when it will touch the surface.
-34% sale
Jaibros Radius gauge 1 mm to 7 mm 34 leaves ₹ 199.00 ₹ 300.00
The blades used are of the concave and convex shape Quantity of Leaves : 34.0 Very handy and light weight Material: Stainless Steel Radius gauge is used to measure die pattern tools etc to check the radius even a round shanks , Radius of Leaves Included(mm) : 1 mm, 1.25 mm, 1.5 mm, 1.75 mm, 2 mm, 2.25 mm, 2.5 mm, 2.75 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm, 6 mm, 6.5 mm,7 mm Quantity of Leaves : 34.0 The radius measurement is usually in metric form and measured in mm(millimeter). The material used is entirely made up of stainless steel, but a layer or finish of satin chrome can be added since it keeps the radius gauge corrosion free and gives them more rust resistance. The blades used are of the concave and convex shape. It may be swung out of the holder case when necessary readings need to be taken as per the requirement.
-51% sale
Jaibros SCREW PITCH GAUGE 4 to 62 TPI, 0.25 to 6.0 mm combination with 55 degree and metric 60 degree ₹ 249.00 ₹ 500.00
52 Leaves , Narrow design 4 to 62 TPI 0.25 to 6.0 mm thread Combination of 55 degree and Metric 60 degree This product is completely manufactured in stainless steel material
-50% sale
Jaibros BORE GAUGE UPT 15 MM STAINLESS STEEL PACK OF 2 ₹ 125.00 ₹ 250.00
Bore Gauge Stainless Steel 15 mm Max Range Made of steel Etched marking Bore gauge is used for taper holes and straight holes , its made steel so it will not rust
-50% sale
Jaibros Magnetic multi angel magnetic welding clamp ₹ 175.00 ₹ 350.00
Material: Stainless Steel, Color: Multicolor Package Contents: 1-Piece Magnetic Clamp Multiangle Ideal for welders and fabricators Strong magnets hold ferrous metals in place during welding and assembly Clamps incorporate angled edges for accurate alignment Magnetic quick clamp is suitable for holding iron and steel products at various angles
sale
Jaibros Spring Caliper 6 INCH size from ₹ 149.00 ₹ 300.00
Spring calipers - 6 inch - 150 mm made of carbon steel Tips are tempered for hardening to ensure long lasting use. Calipers are one of the oldest type of comparison measuring tools. These are designed for taking comparative measurements and transferring the dimensions to a micrometer, precision rule etc. Insider is used to rule inside of a hole or square to check size Manufactured from selected steel, calipers and dividers have a spring joint for precision settings. The legs pivot on a roller and are tensioned by bow spring. The fulcrum stud has a large bearing surface that prevents side deflection of legs Adjustment is made by opening and closing of the legs by means of an adjusting nut Divider points are hardened 50-55 HRC for increased wear resistance , Made from Carbon Steel  
-51% sale
Jaibros Drill gage 1mm to 13 mm ₹ 149.00 ₹ 300.00
DENTIFIES DRILL BITS SIZES- Helpful when working with older, unmarked drill bits and bits too small to fit diameter markings 29 MEASURING HOLES- Identified drill bits from 1mm to 13mm in 0.5 mm increments ETCHED MARKINGS- Black graduations to give high contrast and will not wear off NO MATH- Shows drill sizes in exact milimeter DURABLE- Made from heavy duty, rustproof stainless steel
-57% sale
Mars-Tech Z SETTER ₹ 5,650.00 ₹ 13,000.00
Z SETTER 50 MM MAGNETIC  Have the central measuing part of the zero setter presetter against a plain surface and aligned if with the outer reference surface. Turn the dial gauge for zero setting. have the cutter touched against the Z zero setter. Once the indicator positio at zero the distance between the tool tip to workpiece is 50mm, +-0.005 mm
sale
Jaibros Firm Joint caliper 8 inch from ₹ 199.00 ₹ 250.00
Firm Joint Caliper 8 inch/200 mm  Made of stainless Steel Blade Width 15mm / 0.59";Material : Metal
-41% sale
Jaibros Tap Guide Cut type Tool to Align Tap for threading Lathe Mill Jig Bore ₹ 149.00 ₹ 250.00
Spring Center Tap Guide Tool to Align Tap for threading Lathe Mill Jig Bore Shank is 1/2" Straight/ Parallel Make In INDIA product. Made of precise hardened alloy steel. Point hardened to 50-55 HRC 12 mm (1/2") shank with a spring loaded centre and 85 mm is overall length. For execution, the center's body should be gripped in a drill chuck or collet, while the hardened point is inserted into the middle of the tapping handle. The stroke of the center will follow the tap, assuring straight and accurate hand tapped threads. One universal size for all tapping applications
sale
Jaibros Spring Caliper 10 inch /250 MM from ₹ 180.00 ₹ 390.00
Spring calipers - inside - 10 inch - 250 mm made of carbon steel Tips are tempered for hardening to ensure long lasting use. Calipers are one of the oldest type of comparison measuring tools. These are designed for taking comparative measurements and transferring the dimensions to a micrometer, precision rule etc. Insider is used to rule inside of a hole or square to check size Manufactured from selected steel, calipers and dividers have a spring joint for precision settings. The legs pivot on a roller and are tensioned by bow spring. The fulcrum stud has a large bearing surface that prevents side deflection of legs Adjustment is made by opening and closing of the legs by means of an adjusting nut Divider points are hardened 50-55 HRC for increased wear resistance , Made from Carbon Steel
sale
Jaibros Spring Caliper Flat 8 inch /200 MM from ₹ 199.00 ₹ 400.00
Spring calipers -  8 inch - 200 mm made of carbon steel Tips are tempered for hardening to ensure long lasting use.

GST Input Credit

Get Business Invoice and get 100% GST Input Credit for your Order.

7-Day Return

If you dont like the Product, Return it within 7 Days and get 100% refund.

Lowest Prices

We are offering Products at Lowest Prices in the Industry*.

Highest Quality

We strive to provide best quality product .