All products
5 & 6 Flute Endmills
Accessories
Accessories APP
Accessories APP 2
All
Ballnose (45 HRC)
Ballnose (55 HRC)
Ballnose (60 HRC)
Ballnose (65 HRC)
Ballnose (Inserted)
Ballnose 4 Flute (55HRC)
BBT40 Holders
Boring Heads
BPT
BT-30 Type
BT-40 BCA
BT-40 Type
Carbide Cutters
Carbide Drills
Carbide Inserts
CARBIDE15
CBN Inserts
Ceramic
Ceratizit
Cermet Inserts
Chamfer Cutter
Collet Chucks
Collet Chuks
Corner Radius Endmill
Cylndrical Chucks
Dasqua
Deals
Deskar
Dijet
Drilling Insert
Duracarb
Edge Finders
Endmill (3 Flute) DLC
Endmill (45 HRC)
Endmill (65 HRC)
Endmill (Inserted)
Endmill - 55 HRC
Endmill - 60 HRC
Endmill 2 Flute
ER Collets
ER Nuts
ER Spanners
ER Tap Collets
Find the Edge
Gauges
Grooving Inserts
Grooving Work
High Feed Cutter
Hitachi
HRC63(Nano Coated)
Indexable Cutters
Inserted Cutters
INSERTS15
ISO40 Holders
Jaibros
JXD
Keyless Drill Chuck
Korloy
Korloy
Kyocera
Life
Locking Device
Long Neck Cutters
Machine Tools & Accessories
Mars-Tech
Measurings
Metrology
Micro Drills
Micro Endmill Ballnose
Milling Inserts
Milling Opertations
Miscellaneous
Mitsubishi
Multifunction Tools
Non Standard Endmills
Non-Ferrous Inserts
PCD Inserts
Promo Inserts
Pull Studs
Rougher Endmills
Single Flute Endmill
SK-40 Type
Straight Shank Chucks
Tabikut
Tabikut Inserts
TaeguTec
Threading Application
Threading Inserts
Tool Boy
Tools Boy
Torx Keys
Torx Screws
TURNING
Turning Holders
Turning Inserts
Turning Usage
U Drill
Uncoated End & Ball
volume discount
Wholesale Deals
Widia
Yuzuki
ZCCCT
Zero Setter
Mars-Tech
SK40 fma22 FMB FMC FMA Face...
from ₹ 1,685.00
SK40 facemill holder also called facemill arbour and facemill adaptor
SK40 FMA22 Is mainly used to hold Modular Indexable Cutter with Internal hole of 16 mm any cutter can come with a 22 mm Internal thread but normally 50 mm AND 63 mm Cutters are common in this range.
Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundGage length is 50MM,100MM,150MM,200MM,250MM,300MMRear thread for pull stud is M16 X 2.0
Mars-Tech
SK40 ER32 Collet Chuck SK40...
from ₹ 1,685.00
SK40 Tool Holder accepts all ER32 collets
ER32 Collets range from 1 mm to 20 mm Thread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundCoolant through capabilityGage length is 70mm,100MM,150MM,200MMRear thread for pull stud is M16 X 2.0
All holders have capability to become through coolant by simply removing screw in the center by allen key
Mars-Tech
SK40 Side Lock Adaptor, Sla...
from ₹ 1,685.00
SK40 SLA holder also called Side lock holder
SK40 Side lock Is mainly used to hold Cylindrical/Straight Shank of anything like Indexable Cutter, Baby chuck, Carbide Drill whatever with straight shank can hold into for better rigidity and strength it range from 16 mm to 40 mm as small diameter of shank can be hold in standard collet chuck.
Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 RPMsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundGage length is 50MM,100MM,150MMRear thread for pull stud is M16 X 2.0
Mars-Tech
SK40 Er16 Collet Chuck Sk40...
from ₹ 1,685.00
SK40 Tool Holder accepts all ER16 collets
ER16 Collets range from 1 mm to 12 mm Thread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundCoolant through capabilityGage length is 70mm,100MM,150MM,200MM
Rear thread for pull stud is M16 X 2.0
All holders have capability to become through coolant by simply removing screw in the center by allen key
Mars-Tech
SK40 Er 25 Collet Chuck Sk4...
from ₹ 1,685.00
SK40 Tool Holder accepts all ER25 collets
ER25 Collets range from 1 mm to 16 mm Thread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundCoolant through capabilityGage length is 70mm,100MM,150MM,200MMRear thread for pull stud is M16 X 2.0
All holders have capability to become through coolant by simply removing screw in the center by allen key
Mars-Tech
SK40 fma27 FMB FMC FMA Face...
from ₹ 1,685.00
SK40 facemill holder also called facemill arbour and facemill adaptor
SK40 FMA27 Is mainly used to hold Modular Indexable Cutter with Internal hole of 16 mm any cutter can come with a 27 mm Internal thread but normally 80 mm AND 100 mm Cutters are common in this range.
Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundGage length is 50MM,100MM,150MM,200MM,250MM,300MMRear thread for pull stud is M16 X 2.0
Mars-Tech
Sk40 Er40 Collet Chuck Sk40...
from ₹ 1,685.00
SK40 Tool Holder accepts all ER40 collets
ER40 Collets range from 3 mm to 26 mm Thread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundCoolant through capabilityGage length is 70mm,100mm,150mm,200mmRear thread for pull stud is M16 X 2.0
All holders have capability to become through coolant by simply removing screw in the center by allen key
Mars-Tech
Sk40 Er20 Collet Chuck Sk40...
from ₹ 1,685.00
SK40 Tool Holder accepts all ER20 collets
ER20 Collets range from 1 mm to 14 mm Thread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundCoolant through capabilityGage length is 70mm,100mm,150mm,200mmRear thread for pull stud is M16 X 2.0
All holders have capability to become through coolant by simply removing screw in the center by allen key
Mars-Tech
Sk40 Morse Taper Adaptor Mt...
₹ 1,685.00
SK40 Morse Taper holder are used to hold Tang type shanks
SK40 morse taper Is mainly used to hold Tang Type Drills and Arbours
Better shank taper - accurate, rigid toolholder-to-spindle mount
Less tool wear and replacement - less scrap
Fully ground flange and V-groove, easy on the tool changers for less spindle and changer maintenance
Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundRear thread for pull stud is M16 X 2.0