BBT40 Holders

Mars-Tech ABT40 fmb 22 50/100/150/200... from ₹ 2,887.00

ABT40 fmb 22 50/100/150/200 LongABT40 HOLDER CAN FIT INTO BBT40 CALIBRATED SPINDLE ONLY. ABT40 Holder Taper and Both Faces Are in Contact With Spindle Due to Which Spindle and Holder Act as Single Unit This Allows a Higher "Radial Rigidity" Hence We Get a Good Surface Finish and Dimensional Accuracy While Machining Also Low Vibration at Higher Speed Which Increases the Tool Life Collet Chuck Holder Is Balanced to G6.3-12000 Rpm

Mars-Tech ABT40 ER32um collet chuck 7... from ₹ 3,128.00

ABT40 ER32um collet chuck 70/100/150LABT40 HOLDER CAN FIT INTO BBT40 CALIBRATED SPINDLE ONLY. ABT40 Holder Taper and Both Faces Are in Contact With Spindle Due to Which Spindle and Holder Act as Single Unit This Allows a Higher "Radial Rigidity" Hence We Get a Good Surface Finish and Dimensional Accuracy While Machining Also Low Vibration at Higher Speed Which Increases the Tool Life Collet Chuck Holder Is Balanced to G6.3-12000 Rpm

Mars-Tech ABT40 side lock holder 16/2... ₹ 3,128.00

ABT40 side lock holder 16/20/25/32/40ABT40 HOLDER CAN FIT INTO BBT40 CALIBARATED SPINDLE ONLY. ABT40 Holder Taper and Both Face Are in Contact With Spindle Due to Which Spindle and Holder Act as Single Unit This Allows a Higher "Radial Rigidity" Hence We Get Good Surface Finish and Dimensional Accuracy While Machining Also Low Vibration at Higher Speed Which Increases Tool Life Collet Chuck Holder Is Balanced to G6.3-12000 Rpm

Mars-Tech ABT40 ER16A collet chuck 70... from ₹ 3,128.00

ABT40 ER16A collet chuck 70/100/150LABT40 HOLDER CAN FIT INTO BBT40 CALIBRATED SPINDLE ONLY. ABT40 Holder Taper and Both Faces Are in Contact With Spindle Due to Which Spindle and Holder Act as Single Unit This Allows a Higher "Radial Rigidity" Hence We Get Good Surface Finish and Dimensional Accuracy While Machining Also Low Vibration at Higher Speed Which Increases Tool Life Collet Chuck Holder Is Balanced to G6.3-12000 Rpm

Mars-Tech ABT40 ER40um collet chuck 7... ₹ 3,128.00

ABT40 ER40um collet chuck 70/100ABT40 HOLDER CAN FIT INTO BBT40 CALIBRATED SPINDLE ONLY. ABT40 Holder Taper and Both Faces Are in Contact With Spindle Due to Which Spindle and Holder Act as Single Unit This Allows a Higher "Radial Rigidity" Hence We Get a Good Surface Finish and Dimensional Accuracy While Machining Also Low Vibration at Higher Speed Which Increases the Tool Life Collet Chuck Holder Is Balanced to G6.3-12000 Rpm

Mars-Tech ABT40 fmb27 face mill holder ₹ 3,128.00

ABT40 fmb27 face mill holderABT40 HOLDER CAN FIT INTO BBT40 CALIBRATED SPINDLE ONLY. ABT40 Holder Taper and Both Faces Are in Contact With Spindle Due to Which Spindle and Holder Act as Single Unit This Allows a Higher "Radial Rigidity" Hence We Get Good Surface Finish and Dimensional Accuracy While Machining Also Low Vibration at Higher Speed Which Increases Tool Life Collet Chuck Holder Is Balanced to G6.3-12000 Rpm

Mars-Tech ABT40 mt2 mt3 morse taper a... ₹ 3,128.00

ABT40 mt2 mt3 morse taper adaptorABT40 HOLDER CAN FIT INTO BBT40 CALIBRATED SPINDLE ONLY. ABT40 Holder Taper and Both Faces Are in Contact With Spindle Due to Which Spindle and Holder Act as Single Unit This Allows a Higher "Radial Rigidity" Hence We Get Good Surface Finish and Dimensional Accuracy While Machining Also Low Vibration at Higher Speed Which Increases Tool Life Collet Chuck Holder Is Balanced to G6.3-12000 Rpm

KTA Kta kbt40 er32 Holder Er32/... from ₹ 5,296.00

BBT40 Holder Taper and Both Face Are in Contact With Spindle Due to Which Spindle and Holder Act as Single Unit This Allows a Higher "Radial Rigidity" Hence We Get Good Surface Finish and Dimensional Accuracy While Machining Also Low Vibration at Higher Speed Which Increases Tool Life So These Are Better Than General Bbt40 Holders but It Should Only Be Used With BBT40 Calibarated Spindle Only. Collet Chuck Holder Is Balanced to G2.5-25000 Rpm

Mars-Tech ABT40 ER25um collet chuck 7... from ₹ 3,128.00

ABT40 ER25um collet chuck 70/100/150LABT40 HOLDER CAN FIT INTO BBT40 CALIBRATED SPINDLE ONLY. ABT40 Holder Taper and Both Faces Are in Contact With Spindle Due to Which Spindle and Holder Act as Single Unit This Allows a Higher "Radial Rigidity" Hence We Get Good Surface Finish and Dimensional Accuracy While Machining Also Low Vibration at Higher Speed Which Increases Tool Life Collet Chuck Holder Is Balanced to G6.3-12000 Rpm

KTA Kta kbt40 sla Holder sla25 ... ₹ 4,062.00

BBT40 Holder Taper and Both Face are in Contact with Spindle due to Which Spindle and Holder act as Single Unit this allows a Highter " Radial Rigidity" hence we get good surface finish and dimensional accuracy while maching also low vibration at highter speed which increase tool life. So These are better than general BBT40 Holders but it should only be used with BBT40 Calibarated Spindle Only. Side Lock Holder Is Balanced to G6.3-15000 RPM

Mars-Tech ABT40 ER20A collet chuck 70... ₹ 3,128.00

ABT40 ER20A collet chuck 70/100LABT40 HOLDER CAN FIT INTO BBT40 CALIBRATED SPINDLE ONLY. ABT40 Holder Taper and Both Faces Are in Contact With Spindle Due to Which Spindle and Holder Act as Single Unit This Allows a Higher "Radial Rigidity" Hence We Get Good Surface Finish and Dimensional Accuracy While Machining Also Low Vibration at Higher Speed Which Increases Tool Life Collet Chuck Holder Is Balanced to G6.3-12000 Rpm