All

Mars-Tech ER 32 COLLET DIN6499B AA 0.... from ₹ 313.00

The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50. ER32 series collets have a capacity of 1mm-20mm. Each ER32 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER32-6mm can grab a round shank from 6mm diameter to 5.1mm diameter.

sale

Mars-Tech 16mm cutter 2 pocket Suitab... from ₹ 662.00 ₹ 3,000.00

This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1135 into this. Different Lengths and Different Shank size please choose before adding to cart

Tabikut 6mm Carbide Endmill 55 HRC ... from ₹ 511.00

6mm Carbide Endmill 55 HRC 4 Flutes Total Length Is 50/75/100/150 MMSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing

Mars-Tech ER 16 COLLET DIN6499B AA 0.... from ₹ 241.00

The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50. ER16 series collets have a capacity of 1mm-12mm. Each ER16 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER16-3mm can grab a round shank from 3mm diameter to 2.1mm diameter.

zccct apmt1135 pdr ybg202/205 pack of 10

ZCCCT zccct apmt1135 pdr ybg202/2... ₹ 885.00

WE SELL ORIGINAL INSERTS ONLY APMT1135 ZCCCT YBG205/202 Carbide insert for Steel and Stainless Steel machining with or without coolant , used in any suitable cutter for BAP300R and this is used in milling machine mainly. Suitable cutter any cutter which suits APMT1135 insert.For steel , mild steel , hrc upto 45 with coolant.APMT1135 for BAP300R cutters brown coatedSUITABLE TO ALL MILLING CUTTER FOR APMT1135

sale

Mars-Tech ER 25 COLLET DIN6499B AA 0.... from ₹ 253.00 ₹ 420.00

The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50. ER25 series collets have a capacity of 1mm-16mm. Each ER25 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER25-3mm can grab a round shank from 3mm diameter to 2.1mm diameter.

Tabikut 8mm Carbide Endmill 55 HRC ... from ₹ 551.00

8mm Carbide Endmill 55 HRC 4 Flutes Total Length Is 60/75/100/150/200 MMSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable packing

Tabikut 10 mm Carbide Endmill 55 HR... from ₹ 865.00

10 mm Carbide Endmill 55 HRCSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing

Mars-Tech Torx Screw 2.5 mm T8 ( Pack... from ₹ 353.00

Hardened Star Torx Screw for Milling Cutters offered are screws that come with precision design and constructed standards ,These torx screw are hardened upto 50-55 hrc for wear resistance, These Torx screw are mainly used in indexable tools as Boring bar , Insert cutter , milling cutter ,They are precise screw for better grip of carbide insert with pocket 1 Packet Contains 100 Pcs , Choose Length

Tabikut 4 mm Carbide Endmill 55 HRC... from ₹ 321.00

4 mm Carbide Endmill 55 HRC 4 Flutes 50/75/100 long.50 mm Length price is for 2 Nos. you order 1 quantity you will get 2 pcs 330 rs. price is for 2 nos. 1 will cost 165 rs. only. Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable packing

Mars-Tech Torx Screw 4 mm T15 ( Pack ... from ₹ 353.00

Hardened Star Torx Screw for Milling Cutters offered are screws that come with precision design and constructed standards ,These torx screw are hardened upto 50-55 hrc for wear resistance, These Torx screw are mainly used in indexable tools as Boring bar , Insert cutter , milling cutter ,They are precise screw for better grip of carbide insert with pocket 4 mm Screw comes in different lengths 8,9,10,12,14,16 Choose Length before adding to cart

Tabikut 3mm Carbide Endmill tabikut... from ₹ 321.00

3mm Carbide Endmill tabikut 55 HRC50 mm Length price is for 2 Nos. If you order 1 quantity you will get 2 pcs 220 rs. price is for 2 nos. 1 will cost 110 rs. only. Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing

Mars-Tech Mechanical Edge Finder 10x4 mm ₹ 258.00

Mechanical Edge Finder also called touch point sensor are used for find Zero point of the workpiece and find center of the hole.

Tabikut 12 mm Carbide Endmill 55 HR... from ₹ 1,278.00

12 mm Carbide Endmill 55 HRC 4 Flutes Total Length Is 75/100/150/200 MMSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill , Shoulder mill, side mill etc, Plastic Packaging for non breakable packing

Mars-Tech 20 mm Indexable Inserted En... from ₹ 1,083.00

This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1135 into this Different Lengths and Different Shank sizes please choose before adding to the cart

sale

Mars-Tech ER 20 COLLET DIN6499B AA 0.... from ₹ 229.00 ₹ 380.00

The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50. ER20 series collets have a capacity of 1mm-14mm. Each ER20 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER20-3mm can grab a round shank from 3mm diameter to 2.1mm diameter.

Torx Screw High Precision 2.5 Mm 6mm Long T8

Torx Screw 2.5 Mm T8 High Precision ( Pack Of 10 Pcs )

Mars-Tech Torx Screw 2.5 Mm T8 High P... from ₹ 89.00

Hardened Star Torx Screw for Milling Cutters offered are screws that come with precision design and constructed standards ,These torx screw are hardened upto 50-55 hrc for wear resistance, These Torx screw are mainly used in indexable tools as Boring bar , Insert cutter , milling cutter ,They are precise screw for better grip of carbide insert with pocket

ZCCCT zccct APMT1604 Carbide Inse... ₹ 1,121.00

WE SELL ORIGINAL INSERTS ONLY APMT1604 ZCCCT YBG205/202 Grade Its a universal grade for most of machining material. Carbide insert for Steel and Stainless Steel machining with or without coolant , used in any suitable cutter for BAP400R and this is used in milling machine mainly. Suitable cutter any cutter which suits APMT1604 insert.For steel , mild steel , hrc upto 45-55 with and without coolantAPMT1604 for BAP400R cutters brown coatedSUITABLE TO ALL MILLING CUTTER FOR APMT1604

Mars-Tech ER 11 COLLET DIN6499B AA 0.... from ₹ 253.00

The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50. ER11 series collets have a capacity of 1mm-7mm. Each ER11 collet has a range of (0.5mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.5mm). For example, ER11-3mm can grab a round shank from 3mm diameter to 2.5mm diameter.

Mars-Tech ER 40 COLLET DIN6499B AA 0.... ₹ 361.00

The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50. ER40 series collets have a capacity of 3mm-26mm. Each ER32 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER40-6mm can grab a round shank from 6mm diameter to 5.1mm diameter.

Get Extra 1% Discount on Jaibros App only

Find anything you need

GST Input Credit

7-Day Return

Lowest Prices

Highest Quality