Buy BT-30 Type Tool Holders for Your CNC Machining Needs

Mars-Tech BT30 Er32 Um-70l,100l,150l ... from ₹ 1,324.00

BT30 Er32 Um-70l,100l,150l Er Collet ChuckBT30 Tool Holder accepts all ER32 collets ER32 Collets range from 1 mm to 20 mm The thread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundCoolant through capabilityThe gage length is 70mm,100MM,150MMThe rear thread for the pull stud is M12 X 1.75 All holders have the capability to become through coolant by simply removing screw in the center with allen key

Mars-Tech BT30 Side Lock Adaptor , SL... ₹ 1,505.00

BT30 Side Lock Adaptor, SLA 10,12,16,20,25,32 mm For Cylindrical ShankBT30 SLA holder also called SIDE LOCK HOLDER BT30 SIDE LOCK Is mainly used to hold a Cylindrical/Straight Shank of anything like an Indexable Cutter , Baby chuck, or Carbide Drill whatever a straight shank can hold for better rigidity and strength range from 16 mm to 32 mm as the small diameter of the shank can be held in a standard collet chuck. Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundGage length is 50MM,63MM,80MM,90MMThe rear thread for the pull stud is M12 X 1.75

Mars-Tech BT30 FMB 22 mm Face Milling... ₹ 1,505.00

BT30 FMB 22 mm Face Milling Holder ArbourBT30 facemill holder also called facemill arbour and facemill adaptor BT30 FMA22 Is mainly used to hold Modular Indexable Cutter with Internal hole of 16 mm any cutter can come with a 22 mm Internal thread but normally 50 mm AND 63 mm Cutters are common in this range. Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundGage length is 45MM,90MMRear thread for pull stud is M12 X 1.75

Mars-Tech BT30ER16A-70L,100L, ER Coll... ₹ 1,505.00

BT30ER16A-70L,100L, ER Collet ChuckBT30 Tool Holder accepts all ER16 collets ER16 Collets range from 1 mm to 12 mm Thread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundCoolant through capabilityGage length is 70mm,100MM Rear thread for pull stud is M12 X1.75 All holders have capability to become through coolant by simply removing screw in the center by allen key

Mars-Tech BT30 ER25UM-70L,100L ER Col... ₹ 1,505.00

BT30 ER25UM-70L,100L ER Collet Chuck BT30 Tool Holder accepts all ER25 collets ER25 Collets range from 1 mm to 16 mm The thread inside the internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundCoolant through capabilityThe gage length is 70mm,100MMThe rear thread for the pull stud is M12 X 1.75 All holders have the capability to become through coolant by simply removing the screw in the center with allen key

Mars-Tech BT30 Morse Taper Adaptor MT... ₹ 1,505.00

BT30 Morse Taper Adaptor MT Holder MT1 MT2 MT3BT30 Morse Taper holder are used to hold Tang type shanks BT30 morse taper Is mainly used to hold Tang Type Drills and Arbours Better shank taper - accurate, rigid toolholder-to-spindle mount Less tool wear and replacement - less scrap Fully ground flange and V-groove, easy on the tool changers for less spindle and changer maintenance Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundRear thread for pull stud is M12 X 1.75

Sold out

Mars-Tech BT30 JT6 Adaptor Holder for... ₹ 1,505.00

BT30 JT6 Adaptor Holder for JT6 ArbourBT30 JT6 holders are mainly used to hold JT6 Female Taper , This holder have JT6 Male taper if anything like drill chuck have internal taper of JT6 so it can hold it easily with rigidity. Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundRear thread for pull stud is M12X 1.75

Mars-Tech BT30 FMB 27 Face Milling Ho... ₹ 1,505.00

BT30 FMB 27 Face Milling Holder ArbourBT30 face mill holder also called face mill arbour and face mill adaptor BT30 FMA27 Is mainly used to hold Modular Indexable Cutters with Internal hole of 16 mm any cutter can come with a 27 mm Internal thread but normally 80 mm AND 100 mm Cutters are common in this range. Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundGage length is 45MM,90MMRear thread for pull stud is M12 X 1.75

Mars-Tech BT30FMB 16 Face Milling Hol... ₹ 1,505.00

BT30FMB 16 Face Milling Holder Arbour FMA16BT30 face mill holder also called face mill arbour and facemill adaptor BT30 FMA16 Is mainly used to hold Modular Indexable Cutter with Internal hole of 16 mm any cutter can come with a 16 mm Internal thread but normally 40 mm Cutters are common in this range. Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundGage length is 40mm,80MMRear thread for pull stud is M12 X 1.75

Mars-Tech BT30 Er20a-70L,100L Er Coll... ₹ 1,505.00

BT30 Er20a-70L,100L Er Collet ChuckBT30 Tool Holder accepts all ER20 collets ER20 Collets range from 1 mm to 14 mm The thread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundCoolant through capabilityThe gage length is 70mm,100MMRear thread for the pull stud is M12X1.75

Mars-Tech BT30 Er11a-70l,100l Er Coll... ₹ 1,505.00

BT30 Er11a-70l,100l Er Collet Chuck BT30 Tool Holder accepts all ER11 colletsThread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micronAll critical tool holder surfaces precision groundCoolant through capabilityGage length is 70mm Rear thread for pull stud is M12 X 1.75 All holders have capability to become through coolant by simply removing screw in the center by allen key

Mars-Tech BT30 FMB 32 face milling Ho... ₹ 1,505.00

BT30 FMB 32 face milling Holder ArbourBT30 face mill holder also called face mill arbour and face mill adaptor BT30 FMA32 Is mainly used to hold Modular Indexable Cutter with an Internal hole of 16 mm any cutter can come with a 32 mm Internal thread but normally 100 mm AND 125 mm Cutters are common in this range. Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundGage length is 60MMRear thread for pull stud is M12X1.75