Endmill (Inserted)

sale

Mars-Tech 16mm cutter 2 pocket Suitab... from ₹ 662.00 ₹ 3,000.00

This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1135 into this. Different Lengths and Different Shank size please choose before adding to cart

Mars-Tech 20 mm Indexable Inserted En... from ₹ 1,083.00

This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1135 into this Different Lengths and Different Shank sizes please choose before adding to the cart

10 mm 1 pocket Indexable Inserted Endmill Dia 10 Suitable to APMT1135

10 mm 1 pocket Indexable Inserted Endmill

Mars-Tech 10 mm 1 pocket Indexable In... from ₹ 635.00

This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1135 into this

25 mm Indexable Inserted Endmill shank 25 mm

Mars-Tech 25 mm Indexable Endmill Sha... from ₹ 1,264.00

25 mm Indexable Endmill Shank25 Mm 2 Pocket Suitable To APMT1604This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1604 into this Different Lengths and Different Shank sizes please choose before adding to the cart

Sold out

Mars-Tech 12 mm Indexable Inserted En... from ₹ 662.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of APMT1135 into this

Mars-Tech 25 mm Indexable Inserted En... from ₹ 1,264.00

This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC not to wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1135 into this Different Lengths and Different Shank sizes please choose before adding to the cart

32 mm Indexable Inserted Endmill APMT1604

Mars-Tech 32 mm Indexable Inserted En... from ₹ 1,444.00

32 mm Indexable Inserted Endmill Dia 32 mm 3 Pocket Suitable To APMT1604This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of APMT1135 into this Different Lengths and Different Shank size please choose before adding to cart BELOW IS A VIDEO FOR VIEW OF PRODUCT QUALITY AND BASIC DETAILS.

14 mm Indexable Endmill Suitable 150 mm long To APMT1135 pack of 1

Mars-Tech 14 mm Indexable Endmill Sui... ₹ 963.00

This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1135 into this

BAP400R-50-22-4T Face Milling Cutter Dia 50 Modular Type Suitable To APMT1604 Insert Bull Cutter

Mars-Tech BAP400R-50-22-4T Face Milli... ₹ 1,299.00

BAP400R-50-22-4T Face Milling Cutter Dia 50 Modular Type Suitable To APMT1604 Insert Bull CutterDia 50 cutter for APMT1604 insert , facemill cutter 50 mm apmt1604 Shank Holder FMB-22 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use APMT1604 Of Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert. HAVE A VIDEO VIEW BELOW WITH BASIC DETAILS

BAP400R-63-22-4T Face Milling Cutter Dia

Mars-Tech BAP400R-63-22-4T Face Milli... ₹ 1,540.00

BAP400R-63-22-4T Face Milling Cutter Dia 63 Modular Type Suitable To APMT1604 Insert Bull CutterDia 63 cutter for APMT1604 insert , facemill cutter 63 mm apmt1604 Shank Holder FMB-22 This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use APMT1604 Of Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Mars-Tech 8/10/12/14 mm cutter suitab... from ₹ 1,805.00

8/10/12 mm cutter is suitable for JDMT07 Hitachi Brand Insert.ESE-C10-10-100L-2T SCREW 1.8X4 MM T6 KEY ESE-C12-12-120L-2T SCREW 1.8X4 MM T6 KEY ESE-C14-14-150L-3T SCREW 1.8X4 MM T6 KEY This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use JDMT070204 For HITACHI Brand Insert into this If any other brand have same insert can also fix to this cutter body

18 mm mars-tech Indexable Inserted Endmill

Mars-Tech 18 mm Inserted Endmill Shan... from ₹ 1,079.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of APMT1135 into this HAVE A DETAIL VIEW HERE https://www.youtube.com/watch?v=2wx3B5AEQI0 Different Lengths and Different Shank size please choose before adding to cart

Mars-Tech 22 mm Indexable Inserted En... from ₹ 1,143.00

This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machi with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1135 into this

40 MM Indexable Inserted Endmill | APMT1604 insert

Mars-Tech 40 MM Indexable Inserted En... from ₹ 1,805.00

40 MM Indexable Inserted Endmill Shank 32 Mm 3 Pocket Suitable To APMT1604This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of APMT1604 into this Different Lengths and Different Shank size please choose before adding to cart HAVE A CLEAR VIEW OF PRODUCT ON VIDEO BELOW

Mars-Tech BAP400R-80-27-6T Face Milli... ₹ 2,347.00

Dia 80 cutter for APMT1604 insert , facemill cutter 80 mm apmt1604 Shank Holder FMB-27 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use APMT1604 Of Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Mars-Tech BAP400R-100-32-6T Face Mill... ₹ 3,129.00

BAP400R-100-32-6T Face Milling Cutter Dia 100 Modular Type Suitable To APMT11604 Insert face CutterDia 100 cutter for APMT1604 insert , facemill cutter 100 mm apmt1604 Shank Holder FMB-32 BAP400R-100-32-6T EAP400R-100-32-6T, 400R-100-32-6T This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use APMT1604 Of Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Mars-Tech BAP400R-40-16/22-4T Face Mi... from ₹ 1,444.00

BAP400R-40-16/22-4T Face Milling Cutter Dia 40 Modular APMT1604 Insert CutterDia 40 cutter for APMT1604 insert , facemill cutter 40 mm apmt1604 Shank Holder FMB-22 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use APMT1604 Of Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert. HAVE A CLEAR VIEW ON VIDEO BELOW

Mars-Tech BAP300R-50-22-6T Face Milli... ₹ 2,227.00

BAP300R-50-22-6T Face Milling Cutter Dia 50 Modular Type Suitable To APMT1135 Insert Bull CutterDia 50 cutter for APMT1135 insert, face mill cutter 50 mm apmt1135 This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use APMT1135 Of Tabikut Brand Insert into this If any other brand have same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check the description of the size from other brands to fix this insert.

NICE CUTT 10/12 mm cutter suitable to... ₹ 2,166.00

10/12 mm cutter is suitable for JDMT07 Hitachi Brand Insert. pack of 1NICE CUTT BRAND ESE-C10-10-100L-2T SCREW 1.8X4 MM T6 KEY ESE-C12-12-120L-2T SCREW 1.8X4 MM T6 KEY This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use JDMT070204 For HITACHI Brand Insert into this If any other brand have same insert can also fix to this cutter body

Sold out

Mars-Tech 63mm Apmt1604 other edge in... ₹ 2,166.00

63 MM APMT1604 OTHER EDGE CUTTER 4 POCKET 75 DEGREE Dia 63 cutter for APMT1604 insert , facemill cutter 63 mm apmt1604 Shank Holder FMB-22 This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides , you can use APMT1604 Of Tabikut Brand Insert into this If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Get Extra 1% Discount on Jaibros App only

Find anything you need

Endmill (Inserted)

GST Input Credit

7-Day Return

Lowest Prices

Highest Quality