Dasqua Jaibros
-51% sale
Jaibros Scriber Tip point tungsten carbide tip ₹ 149.00 ₹ 300.00
Steel pocket pen clip. Permanent magnet for picking up items (top end) Knurled Body for a Better Grip. Knurled Aluminium Tip is changeable easily ,Tungsten carbide pin point tip A carbide scribe may seem like an obscure tool, but it's not. What the carpenter's pencil is to building houses, the carbide scribe is to building with metal. As anyone who has marked metal will tell you, a pencil doesn't work and neither do most pens. If you can get a pen to make a line, it can easily be smudged off. Even the trusty Sharpie pen makes a big fat line. But a scribe is perfect. It marks a clean sharp line. And better still, it cuts through dirt, paint, rust, and mill scale. It's the tool to use for clean, accurate lines. Its secret is at the business end, a little sharpened rod of tungsten carbide, a material so hard it can even scribe a line on the surface of a tile. , and its tip is retractable As holds true with other things in life, when it comes to carbide scribes and metal working, little things mean a lot.
-50% sale
Jaibros T-Handle T Type Tap Wrench Set of 3 Pieces Solid Collet Jaws chrome finish white pack of 3 ₹ 300.00 ₹ 600.00
From 1/16" to 5/32", 5/32" to 1/4" & 1/4" to 1/2" in the 3 pieces set. 3 Different Adjustable Tap Wrenches Top Quality, Unused PartsDesigned for Use with Taps, Reamers, Screw Extractors, & Other Tools with Square Shanks Works the Same JAIBROS Set of 3 Pieces quality made t-type tap wrenches with hardened & tempered steel jaws. The knurled cap on the jaws gives you the freedom to tighten the jaws to grip the tap, reamer, drill like a vice for a wide variety of applications. Jaw Opening ranges from 1/16" to 5/32", 5/32" to 1/4" & 1/4" to 1/2" in the 3 pieces set. New T-Handle Tap Wrench Solid Jaw 3 Piece Set Adjustable Tap Wrench Set 3 Different Adjustable Tap Wrenches Top Quality, Unused Parts Designed for Use with Taps, Reamers, Screw Extractors, & Other Tools with Square Shanks Works the Same Adjustable T-Handle Tap Wrench Set - 3 Piece
Sold out -51% sale
Jaibros Feeler Gauge 0.03 to 1.0 mm 26 blades ₹ 249.00 ₹ 500.00
Range from 0.03 to 1.0 mm 26 Blades Material: Steel, Color: BLACK Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don?t worry about that Metric sizes (mm): 0.03, 0.04, 0.05, 0.06,0.07, 0.08, 0.09, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.45, 0.50, 0.55, 0.60, 0.65, 0.70, 0.75, 0.80, 0.85 .0.90 ,1.0 mm A feeler gauge is a tool used to measure gap widths. Feeler gauges are mostly used in engineering to measure the clearance between two parts. They consist of a number of small lengths of steel of different thicknesses with measurements marked on each piece. They are flexible enough that, even if they are all on the same hinge, several can be stacked together to gauge intermediate values. It is common to have two sets for imperial units typically measured in thousandths of an inch and metric measurements. Manufactured using high carbon steel and chrome vanadium steel for strength, durability and resistance to corrosion. This master feeler gauge is constructed of durable harden steel that won t wear down over time. It's 26 blades provide accurate measurement of clearances. Each blade has easy to read etched markings. Every blade with its thickness clearly on it, easy to select.
-34% sale
Jaibros Radius gauge 1 mm to 7 mm 34 leaves ₹ 199.00 ₹ 300.00
The blades used are of the concave and convex shape Quantity of Leaves : 34.0 Very handy and light weight Material: Stainless Steel Radius gauge is used to measure die pattern tools etc to check the radius even a round shanks , Radius of Leaves Included(mm) : 1 mm, 1.25 mm, 1.5 mm, 1.75 mm, 2 mm, 2.25 mm, 2.5 mm, 2.75 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm, 6 mm, 6.5 mm,7 mm Quantity of Leaves : 34.0 The radius measurement is usually in metric form and measured in mm(millimeter). The material used is entirely made up of stainless steel, but a layer or finish of satin chrome can be added since it keeps the radius gauge corrosion free and gives them more rust resistance. The blades used are of the concave and convex shape. It may be swung out of the holder case when necessary readings need to be taken as per the requirement.
-51% sale
Jaibros SCREW PITCH GAUGE 4 to 62 TPI, 0.25 to 6.0 mm combination with 55 degree and metric 60 degree ₹ 249.00 ₹ 500.00
52 Leaves , Narrow design 4 to 62 TPI 0.25 to 6.0 mm thread Combination of 55 degree and Metric 60 degree This product is completely manufactured in stainless steel material
-51% sale
Jaibros Drill gage 1mm to 13 mm ₹ 149.00 ₹ 300.00
DENTIFIES DRILL BITS SIZES- Helpful when working with older, unmarked drill bits and bits too small to fit diameter markings 29 MEASURING HOLES- Identified drill bits from 1mm to 13mm in 0.5 mm increments ETCHED MARKINGS- Black graduations to give high contrast and will not wear off NO MATH- Shows drill sizes in exact milimeter DURABLE- Made from heavy duty, rustproof stainless steel
-61% sale
Jaibros Depth Gauge 150MM/6INCH ₹ 199.00 ₹ 500.00
Mechanical depth gauge upto 150 mm or 6 inch Thread to lock the size , 1 mm Thickness 5 mm Width High Precision Use in many industries and engineering sector to check depth of an object This product is completely manufactured in stainless steel material A depth gauge typical refers to is a precision measurement instrument that is used by mechanical engineers, manufacturing engineers, and machinists among others, to accurately obtain the measurement of the depth of a bored cavity, recess, hole, groove or other similar openings that were created below the surface level of a material.
Sold out -50% sale
Jaibros Bore Gauge UPT 15 mm Stainless Steel Pack Of 2 ₹ 125.00 ₹ 250.00
Bore Gauge Stainless Steel 15 mm Max Range Made of steel Etched marking Bore gauge is used for taper holes and straight holes , its made steel so it will not rust
-38% sale
Jaibros RECTANGULR DEGREE PROTRACTOR ANGEL FINDER STAINLESS STEEL ₹ 249.00 ₹ 400.00
Allows for Precise Measurement of Angles Provides a 0 to 180-Degree Measurement The square head and long extension arm boast stainless steel construction for ultimate durability. Brass center screw will not rust or corrode. The Stainless Steel Protractor from JAIBRSO Level is an essential tool for machinists, carpenters and woodworking hobbyists. Its stainless steel construction gives it strength, durability and the ability to resist rust. This JAIBROS Level 6 in. stainless steel protractor has the length for setting up bevels or for measuring parts in the construction of machinery. The square head makes it possible to anchor the protractor against objects to hold it in place as you take measurements. This Empire Level square head protractor has a 0 to 180 semi-circle scale to measure all angles. Measure an angle with the small stainless steel arm which glides smoothly for precise alignment. Use the black-knurled thumb nut to lock the arm into place as you take measurements. 6 in. stainless steel arm, square head 0 to 180 measurements Use to measure and transfer angles Lightweight design Brass center screw will not rust or corrode Ideal for metalworking
sale
Jaibros Spring Caliper 6 INCH size from ₹ 149.00 ₹ 300.00
Spring calipers - 6 inch - 150 mm made of carbon steel Tips are tempered for hardening to ensure long lasting use. Calipers are one of the oldest type of comparison measuring tools. These are designed for taking comparative measurements and transferring the dimensions to a micrometer, precision rule etc. Insider is used to rule inside of a hole or square to check size Manufactured from selected steel, calipers and dividers have a spring joint for precision settings. The legs pivot on a roller and are tensioned by bow spring. The fulcrum stud has a large bearing surface that prevents side deflection of legs Adjustment is made by opening and closing of the legs by means of an adjusting nut Divider points are hardened 50-55 HRC for increased wear resistance , Made from Carbon Steel  
Sold out -41% sale
Jaibros Tap Guide Cut type Tool to Align Tap for threading Lathe Mill Jig Bore ₹ 149.00 ₹ 250.00
Spring Center Tap Guide Tool to Align Tap for threading Lathe Mill Jig Bore Shank is 1/2" Straight/ Parallel Make In INDIA product. Made of precise hardened alloy steel. Point hardened to 50-55 HRC 12 mm (1/2") shank with a spring loaded centre and 85 mm is overall length. For execution, the center's body should be gripped in a drill chuck or collet, while the hardened point is inserted into the middle of the tapping handle. The stroke of the center will follow the tap, assuring straight and accurate hand tapped threads. One universal size for all tapping applications
-49% sale
Jaibros Try Square 2 inch, 3 inch, 4 inch and 6 inch set stainless steel finish pack of 4 ₹ 920.00 ₹ 1,800.00
This range of squares comes in handy for setting up and checking machinery, checking Carpenter's squares or using as a try square when marking joints or testing faces and edges Blade Thickness is 1.7 mm 4 sizes in 1 box 2",3",4".6" Economial Cost High Quality Make In india product JAIBROS Try Square for Machininst , Carpenter , General Engineering are Carefully crafted from high quality tool steel, these squares are accurate to BS939 Grade B standard. The stock and blade are precision ground to ensure straightness and accuracy, and the spring steel blade is hardened and tempered for increased durability. Set of 4 in a wooden storage case containing 50mm, 75mm, 100mm, 150mm (2in , 3in, 4in, 6in). 50mm (2in)70 x 50 x 8.5mm50 x 31mm1.7mm 75mm (3in)95 x 60 x 8.5mm75 x 41.5mm1.7mm 100mm (4in)120 x 75 x 8.5mm100 x 56mm1.7mm 150mm (6in)173 x 100 x 11mm 150 x 75mm1.7mm
-38% sale
Jaibros Knurling tool pivot head for lathe double head adjustable black pack of 1 ₹ 299.00 ₹ 480.00
Knurls are Hob Cut from High Speed Steel and Heat Treated Two knurls Tool is generally provided with medium knurls but other knurls can also be provided if required Machined ground steel in Shiny Black Finish. Tool holder size is 12 mm and can fit into any lathe post easily. Knurling is a manufacturing process, typically conducted on a lathe, whereby a pattern of straight, angled or crossed lines is cut or rolled into the material. Self-centering Knurling Tool Holder features a knurling head that rotates within a 40 degree arc so equal pressure is automatically applied to both wheels.
Sold out -50% sale
Jaibros Magnetic multi angel magnetic welding clamp ₹ 175.00 ₹ 350.00
Material: Stainless Steel, Color: Multicolor Package Contents: 1-Piece Magnetic Clamp Multiangle Ideal for welders and fabricators Strong magnets hold ferrous metals in place during welding and assembly Clamps incorporate angled edges for accurate alignment Magnetic quick clamp is suitable for holding iron and steel products at various angles

GST Input Credit

Get Business Invoice and get 100% GST Input Credit for your Order.

7-Day Return

If you dont like the Product, Return it within 7 Days and get 100% refund.

Lowest Prices

We are offering Products at Lowest Prices in the Industry*.

Highest Quality

We strive to provide best quality product .