Boring Heads

Mars-Tech Fine Boring Bar 400-510 mm ... ₹ 28,950.00

Fine boring bar for bigger hole range Suitable Insert is TCMT1102 (insert not included) Weight of the bar is 5.1 Kg ( holder not included)Boring bar minimum length is 121 mm Suitable holder is BST Type

Mars-Tech Fine Boring Bar 200-310 mm ... ₹ 22,790.00

Fine boring bar for bigger hole range Suitable Insert is TCMT1102 (insert not included) Weight of the bar is 3.1 Kg ( holder not included)Boring bar minimum length is 117 mm Suitable holder is BST Type

EWN100-203 mm range fine boring head pack of 1

Mars-Tech EWN100-203 mm range fine bo... from ₹ 1,900.00

EWN100-203 fine boring head has a range of 100 mm to 153 mm if you put its cartridge you can increase the boring range with same head 6-2 - 126 TO 179 MM Inclusive 6-3 - 150 TO 203 MM inclusive Suitable insert is TCMT/TCGT 1102 Size (Inserts are bought separately)

EWN32-60 mm range fine boring head pack of 1

Mars-Tech EWN32-60 mm range fine bori... from ₹ 1,062.00

EWN32-60 fine boring head has a range of 32 mm to 45 mm if you put its cartridge you can increase the boring range with same head 3-2 - 41 TO 51 MM Inclusive 3-3 - 50 TO 60MM inclusive Suitable insert is TPGH/X 0802 Size (Inserts are bought separately)

SDJ 52-108 mm boring head for finish boring range pack of 1

Mars-Tech SDJ 52-108 mm boring head f... ₹ 15,779.00

SDJ Boring head are finishing cum roughing heads and can work directly after u drill operation. kindly check details size for more details Suitable holding for this is LBK5

Sold out

Mars-Tech C Type Boring Head 100mm ₹ 10,351.00

C-type Boring head with 25 mm Boring Tool Graduation 1 Div. = .01 mm Boring Hole 25 mm Offset - 40mm Boring Capacity - 25 mm to 250 mm Back Thread - 1.5" x 18 TPI Can be used with different Shanks R8,MT2,MT3,ISO30,ISO40,BT40,BT50,ETC. You can use indexable boring bar with 25 mm shank to start minimum diameter of boring. Length of the boring should be LD3 if boring bar is 25 mm depth of boring should limit to 75 mm in order to escape chattering.

Sold out

Mars-Tech C Type Boring Head 75 MM ₹ 8,184.00

C-type Boring head with 20 mm Boring Tool Graduation 1 Div. = .01 mm Boring Hole 20 mm Offset - 25mm Boring Capacity - 20 mm to 200 mm Back Thread - 1.5" x 18 TPI Can be used with different Shanks R8,MT2,MT3,ISO30,ISO40,BT40,BT50,ETC. You can use indexable boring bar with 20 mm shank to start minimum diameter of boring. Length of the boring should be LD3 if boring bar is 20 mm depth of boring should limit to 60 mm in order to escape chattering.

younio acckee fine boring head pack of 1

ACCkee younio acckee fine boring h... from ₹ 1,850.00

this fine boring head without cartridge to check range please check last image for technical part.

Mars-Tech Fine Boring Bar 500-610 mm ... ₹ 32,030.00

Fine boring bar for bigger hole range Suitable Insert is TCMT1102 (insert not included) Weight of the bar is 5.9 Kg ( holder not included)Boring bar minimum length is 121 mm Suitable holder is BST Type

EWN41-74 mm range fine boring head pack of 1

Mars-Tech EWN41-74 mm range fine bori... from ₹ 1,500.00

EWN41-74 fine boring head has a range of 40 mm to 55 mm if you put its cartridge you can increase the boring range with same head 4-2 - 51 TO 66 MM Inclusive 4-3 - 64 TO 79 MM inclusive Suitable insert is TCMT/TCGT 1102 Size (Inserts are bought separately)

EWN20-36 mm range fine boring head pack of 1

Mars-Tech EWN20-36 mm range fine bori... from ₹ 1,062.00

EWN20 fine boring head has a range of 20 mm to 25 mm if you put its cartridge you can increase the boring range with same head 1-2 - 25 TO 31 MM Inclusive 1-3 - 30 TO 36 MM inclusive Suitable insert is TPGH/X 0802 Size (Inserts are bought separately)

EWN25-47 mm range fine boring head pack of 1

Mars-Tech EWN25-47 mm range fine bori... from ₹ 1,062.00

EWN25-47 fine boring head has a range of 25 mm to 33 mm if you put its cartridge you can increase the boring range with same head 2-2 - 32 TO 40 MM Inclusive 2-3 - 39 TO 47MM inclusive Suitable insert is TPGH/X 0802 Size (Inserts are bought separately)

Jaibros Reversible Tapping Attachme... ₹ 18,290.00

Choose MT Shank from Variation Quaity Attachment Designed for Drilling Machiens for Drilling Through & Blind Holes / Drills with STD Taps The Automatic reverse Mechanism has a Double Back out Speed & adjustable Friction Cluth to Avoid breakage of Taps. Supplier in shank MT2/MT3 in tapping capacity range M3- M12. The 2 smaller RODS help you to adjust the Torque / Strength as per tap size. Not for Rdia Drilling Machine Usable on Every Vertical Drilling Machine with Rotation Non Reversing Spindle not for Radial Drilling Machine