BT40 ER11A Collet chuck-70L,100L,150L

₹ 1,505.00
SKU: JBRS0297

Size

70 MM LONG 100 MM LONG 150 MM LONG

BT40 ER11A Collet chuck-70L,100L,150L

Brand - Mars-Tech
₹ 1,505.00
SKU: JBRS0297

Size

70 MM LONG 100 MM LONG 150 MM LONG
0 LEFT IN STOCK

Get Rs.50 Off on Prepaid Orders above Rs.500 via Razorpay Gateway. (Discount will be applied During Checkout at Payment Gateway) (No Code Required)

Product description
BT40 ER11A Collet chuck-70L,100L,150L

BT40 Tool Holder accepts all ER11 collets

The thread inside internal stop screw
Made from alloy steel hardened to 54 – 56rc
Balanced to G6.3 at 12,000 rpms
Concentricity is less than .005 microns
All critical tool holder surfaces precision ground
Coolant through capability
The gage length is 70mm

The rear thread for the pull stud is M16 X 2.0

All holders have the capability to become through coolant by simply removing the screw in the center with allen key 


Products are usually delivered in 3-7 days depending upon your location.

0 have this item in their cart.
Add to cart

Add to cart

Related Products

ER 11 COLLET
Mars-Tech ER 11 COLLET DIN6499B AA 0.... from ₹ 253.00
The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding.  Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50. ER11 series collets have a capacity of 1mm-7mm. Each ER11 collet has a range of (0.5mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.5mm). For example, ER11-3mm can grab a round shank from 3mm diameter to 2.5mm diameter.
ER 11 M Type Spanner
Mars-Tech ER 11 M Type Spanner Red Grip from ₹ 181.00
ER11M Wrench is made from high quality alloy steel ,Thick material allows high torque without bending,5 point contact ensures no distortion of collet nut while tightening,ER11 Wrench works on all of our M Type collet chucks that take ER11 collets
ER11M SPANNER
Mars-Tech ER11M SPANNER TYPE pack of 1 ₹ 288.00
ER11M Spanner for ER11 miniature type nut , tighten it and loosen it
Mars-Tech ER Nut ER11
Mars-Tech Mars-Tech ER Nut ER11 A And... from ₹ 198.00
Holds all ER11 collets from 1 mm to 7 mmMade from alloy steel hardened to 54 – 56rcPrecision ground ID thread and taperHEX type Has an id thread of – M14X0.75PHEX NUT Outside diameter is 19 MMNormal key to tighteningER11A-Wrench SPANNER works on this collet nut M TYPE Has an id thread of 13mm X .75 pitchM TYPE Outside diameter is .630 inches (16mm) ER11M-Wrench SPANNER works on this collet nutInternal cam removes collet when unscrewedMARSTECH CODE IS ER11A TYPE NUT

GST Input Credit

Get Business Invoice and get 100% GST Input Credit for your Order.

7-Day Return

If you dont like the Product, Return it within 7 Days and get 100% refund.

Lowest Prices

We are offering Products at Lowest Prices in the Industry*.

Highest Quality

We strive to provide best quality product .
Jaibros is a Registered Trademark owned by HAKUNA MATATA RETAIL PRIVATE LIMITED 2009-