High Quality Carbide Cutters At Best Price In India – Page 2

3 Mm -3/4mm SHANK Carbide Endmill 60 HRC 4 Flutes

Tabikut 3 Mm -3/4mm SHANK Carbide E... from ₹ 442.00

3 Mm -3/4mm SHANK Carbide Endmill 60 HRC 4 Flutes , PACK OF 2 75 MM long is Pack of 1Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing 55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS DIFFRENCE IN QUALITY AND MATERIAL, 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL

Tabikut 2.5 mm Carbide Endmill 55 H... ₹ 342.00

Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing

Tabikut 6 MM Carbide Endmill 60 HRC... from ₹ 814.00

6 MM Carbide Endmill 60 HRC 50/75 mm long 4 FlutesUPTO 6 MM 50 mm Length price is for 2 Nos. If you order 1 quantity you will get 2 pcs 990 rs. price is for 2 nos. 1 will cost 495 rs. only. Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc , Plastic Packaging for non-breakable packing

Tabikut 16 mm Carbide Endmill 55 HR... from ₹ 3,127.00

Solid CARBIDE CUTTER are used to machine Hard and tough Material, Steel, Alloy Steel, Cast iron, stainless steel and many other material grades.

5 Mm Carbide Ballnose 55 HRC 2 Flutes ,Shank 5 MM Flute Length 10 Mm Total Length Is 50/75/100 Mm

Tabikut 5 Mm Carbide Ballnose 55 HR... from ₹ 348.00

5 Mm Carbide Ballnose 55 HRC 2 Flutes, Shank 5 MM Flute Length 10 Mm Total Length Is 50/75/100 MmSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes, if the total length increase flute length remains same of double of diameter.

1.5 Mm Carbide Ballnose 55 HRC PACK OF 2

Tabikut 1.5 Mm Carbide Ballnose 55 ... ₹ 434.00

1.5 mm Carbide Ballnose 55 HRC PACK OF 2Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing Size of Carbide Ballnose: 1.5 mm The flute Length of Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes if the total length increase flute length remains the same double diameter.

Tabikut Micro Endmill 0.5 Mm 4mm Sh... ₹ 502.00

Micro Endmill 0.5 mm with 2 Flutes and 4 mm Shank 0.6 mm Flute Length

Tabikut 12mm Carbide Endmill 60 HRC... from ₹ 2,006.00

12mm Carbide Endmill 60 HRC 4 FlutesSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non breakable packing

Tabikut 3mm Carbide Ballnose 60 HRC... ₹ 531.00

3mm Carbide Ballnose 60 HRC Shank 3 mm and 4 mm pack of 2UPTO 6 MM 50 mm Length price is for 2 Nos. If you order 1 quantity you will get 2 pcs 460 rs. price is for 2 nos. 1 will cost 230 rs. only. Ballnose are 2 flutes and Endmills are 4 flutes Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing 55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS DIFFRENCE IN QUALITY AND MATERIAL , 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL

12 Mm Carbide Ballnose 55 HRC 2 Flutes ,Shank 12 MM Flute Length 24 Mm Total Length Is 75/100/150/200 Mm

Tabikut 12 Mm Carbide Ballnose 55 H... from ₹ 1,291.00

12 Mm Carbide Ballnose 55 HRC 2 Flutes, Shank 12 MM Flute Length 24 Mm Total Length Is 75/100/150/200 MmSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill , Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing Flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes, if the total length increase flute length remains same of double of diameter.

Sold out

Tabikut 2 Mm Carbide Endmill 60 HRC... ₹ 543.00

UPTO 6 MM 50 mm Length price is for 2 Nos. If you order 1 quantity you will get 2 pcs 460 rs. price is for 2 nos. 1 will cost 230 rs. only. Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc. Plastic Packaging for non-breakable packing 55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS A DIFFERENCE IN QUALITY AND MATERIAL, 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL.

Tabikut 1 mm Carbide Endmill 60 HRC... ₹ 543.00

UPTO 6 MM 50 mm Length price is for 2 Nos. you order 1 quantity you will get 2 pcs 440 rs. price is for 2 nos. 1 will cost 220 rs. only. 1 mm Carbide Endmill 60 HRC 4 Flutes, PACK OF 2 Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for nonbreakable packing Size of Carbide Endmill 60 HRC: 1mm 55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS A DIFFERENCE IN QUALITY AND MATERIAL, 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL.

Tabikut 5 ENDMILL IN 6 mm Shank 50 ... ₹ 250.00

5 Carbide Endmill 55 HRC,6 mm Shank 50,75 and 100 long55 HRC Carbide Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle , Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing

Tabikut 1.5 Mm Carbide Endmill 60 H... ₹ 543.00

1.5 Mm Carbide Endmill 60 HRC 4 Flutes , PACK OF 2UPTO 6 MM 50 mm Length price is for 2 Nos. If you order 1 quantity you will get 2 pcs 460 rs. price is for 2 nos. 1 will cost 230 rs. only. 1.5 Mm Carbide Endmill 60 HRC 4 Flutes, PACK OF 2 Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for nonbreakable packing Size of Carbide Endmill 60 HRC: 1.5 mm 55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS A DIFFERENCE IN QUALITY AND MATERIAL, 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL.

Tabikut Micro Endmill 0.3 Mm 4mm Sh... ₹ 525.00

Micro Endmill 0.3 mm with 2 Flutes and 4 mm Shank 0.6 mm Flute Length

Tabikut 5mm 50/75 long Carbide Endm... from ₹ 584.00

5mm 50/75 long Carbide Endmill 60 HRC 4 Flutes pack of 1Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing Size of Solid Carbide Cutter 60 HRC: 5 mm

Tabikut 1 mm Carbide Ballnose 60 Hr... ₹ 531.00

UPTO 6 MM 50 mm Length price is for 2 Nos. If you order 1 quantity you will get 2 pcs 460 rs. price is for 2 nos. 1 will cost 230 rs. only. Ballnose are 2 flutes and Endmills are 4 flutes 1 mm Carbide Ballnose 60 Hrc Pack Of 2 Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing Size of Carbide Ballnose 60 Hrc: 1mm 55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS DIFFERENCE IN QUALITY AND MATERIAL, 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL

Sold out

4 mm Carbide Ballnose 2 Flutes | TABIKUT

Tabikut 4 mm Carbide Ballnose 2 Flu... ₹ 637.00

4 mm Carbide Ballnose 2 Flutes TABIKUT 60 HRC pack of 2Ballnose are 2 flutes and Endmills are 4 flutes Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing 55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS DIFFERENCE IN QUALITY AND MATERIAL, 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL

Sold out

Tabikut 6 mm Carbide Ballnose 60 HR... ₹ 1,274.00

6 mm Carbide Ballnose 60 HRC PACK OF 2UPTO 6 MM 50 mm Length price is for 2 Nos. If you order 1 quantity you will get 2 pcs Ballnose are 2 flutes and Endmills are 4 flutes Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle , Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing 55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS DIFFERENCE IN QUALITY AND MATERIAL , 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL

5 mm Carbide Ballnose 55 Hrc 6 mm Shank | ballnose

5 mm Carbide Ballnose 55 Hrc 6 mm Shank size 50,75 and 100 mm long

Tabikut 5 mm Carbide Ballnose 55 Hr... from ₹ 354.00

5 mm Carbide Ballnose 55 Hrc 6 mm Shank size 50,75 and 100 mm longBronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing