All products
Accessories
Accessories APP
Accessories APP 2
All
Ballnose (45 HRC)
Ballnose (55 HRC)
Ballnose (60 HRC)
Ballnose (65 HRC)
Ballnose (65 HRC)
Ballnose (Inserted)
Ballnose - 45 HRC
Ballnose - 55 HRC
Ballnose - 55 HRC 1
Ballnose - 60 HRC
Ballnose - 60 HRC 1
Ballnose 4 Flute (55HRC)
BBT40 Holders
Boring Heads
BPT
BT-30 Type
BT-40 BCA
BT-40 Type
Carbide Cutters
Carbide Cutters
Carbide Drills
CARBIDE15
CBN Inserts
Ceramic
Ceratizit
Cermet
Chamfer Cutter
Chamfering
Collet Chucks
Collet Chuks
Collet ER Types
Collets - ER Type
Corner Radius Endmill
Cutters High Feed
Cylindrical Chuks
Cylndrical Chuck
Dasqua
Deal of the Day
Deskar
Dijet
Drill Chuck - Keyless
Drilling Insert
Duracarb
Edge Finders
Endmill (3 Flute) DLC
Endmill (45 HRC)
Endmill (55 HRC) 1
Endmill (60 HRC)
Endmill (65 HRC)
Endmill (Inserted)
Endmill - 45 HRC
Endmill - 55 HRC
Endmill - 55 HRC 1
Endmill - 60 HRC
Endmill - 60 HRC 1
Endmill 2 Flute
Endmill Ballnose - Micro
ER Collets
ER Nuts
ER Spanners
ER Tap Collets
Find the Edge
Gauges
Grooving Inserts
Grooving Work
Heads - Boring
High Feed
Hitachi
Indexable Cutters
Inserted Ballnose
Inserted Cutters
Inserted Endmill
Inserts
INSERTS15
ISO40 Holders
Jaibros
JXD
Keyless Drill Chuck
Knob - Pull Studs
Knob- Pull Studs
Korloy
Korloy
Kyocera
Life
Locking Device
Long Neck Cutters
Mars-Tech
Measurings
Metrology
Micro Endmill Ballnose
Milling Inserts
Milling Opertations
Miscellaneous
Mitsubishi
Multifunction Tools
Non Standard Endmills
Non-Ferrous
Nuts - ER
Nuts ER
PCD Inserts
Promo Inserts
Pull Studs
Rougher Endmills
Single Flute Endmill
SK-40 Type
Spanner - ER
Spanners - ER
Straight Shank Chucks
Tabikut
Tabikut Inserts
TaeguTec
Threading Application
Threading Inserts
Tool Boy
Tools Boy
Torx Keys
Torx Screws
TURNING
Turning Holders
Turning Inserts
Turning Usage
U Drill
Uncoated End & Ball
Widia
Yuzuki
Z Setter
ZCCCT
Zero Pre Setter
Zero Setter
Mars-Tech
BT40 JT6 Adaptor Holder For...
₹ 1,505.00
BT40 JT6 holders are mainly used to hold JT6 Female Taper , This holder have JT6 Male taper if anything like drill chuck have internal taper of JT6 so it can hold it easily with rigidity.
Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundRear thread for pull stud is M16 X 2.0
Mars-Tech
BT40 fmb 40 mm Face millin...
from ₹ 1,505.00
BT40 facemill holder also called facemill arbour and facemill adaptor
BT40 FMA40 Is mainly used to hold Modular Indexable Cutter with Internal hole of 16 mm any cutter can come with a 40 mm Internal thread but normally 160mm AND 200 mm Cutters are common in this range.
Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundGage length is 70MM,100MM,150MM,Rear thread for pull stud is M16 X 2.0
Jaibros
SK40 Er16 Collet Chuck Sk40...
from ₹ 1,685.00
SK40 Tool Holder accepts all ER16 collets
ER16 Collets range from 1 mm to 12 mm Thread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundCoolant through capabilityGage length is 70mm,100MM,150MM,200MM
Rear thread for pull stud is M16 X 2.0
All holders have capability to become through coolant by simply removing screw in the center by allen key
Mars-Tech
BT30 FMB 22 mm Face Milling...
₹ 1,505.00
BT30 FMB 22 mm Face Milling Holder ArbourBT30 facemill holder also called facemill arbour and facemill adaptor
BT30 FMA22 Is mainly used to hold Modular Indexable Cutter with Internal hole of 16 mm any cutter can come with a 22 mm Internal thread but normally 50 mm AND 63 mm Cutters are common in this range.
Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundGage length is 45MM,90MMRear thread for pull stud is M12 X 1.75
Mars-Tech
BT30ER16A-70L,100L, ER Coll...
₹ 1,505.00
BT30ER16A-70L,100L, ER Collet ChuckBT30 Tool Holder accepts all ER16 collets
ER16 Collets range from 1 mm to 12 mm Thread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundCoolant through capabilityGage length is 70mm,100MM
Rear thread for pull stud is M12 X1.75
All holders have capability to become through coolant by simply removing screw in the center by allen key
Mars-Tech
BT40 CBK 6- 65/95/125/155/1...
from ₹ 2,166.00
BT40 CBK 6- 65/95/125/155/185 Long pack of 1LBK also Called CBK is used for holding of SDJ EWN RBH kind of boring holders
it has diffrent lengths to choose from variation
balanced upto 12000 RPM
Mars-Tech
BT40 CBK 4- 95/125/155/185 ...
from ₹ 2,166.00
BT40 CBK 4- 95/125/155/185 Long pack of 1LBK also Called CBK is used for holding SDJ EWN RBH kind of boring holders
it has different lengths to choose from variation
balanced upto 12000 RPM
Mars-Tech
ABT40 side lock holder 16/2...
₹ 3,128.00
ABT40 side lock holder 16/20/25/32/40ABT40 HOLDER CAN FIT INTO BBT40 CALIBARATED SPINDLE ONLY.
ABT40 Holder Taper and Both Face Are in Contact With Spindle Due to Which Spindle and Holder Act as Single Unit This Allows a Higher "Radial Rigidity" Hence We Get Good Surface Finish and Dimensional Accuracy While Machining Also Low Vibration at Higher Speed Which Increases Tool Life
Collet Chuck Holder Is Balanced to G6.3-12000 Rpm
GRIP
Micro Boring Bars Bca 23-29...
₹ 4,657.00
Micro Boring Bars Are Used for Finishing Purpose .Please Check Boring Bar Range and Suitable Length for Your JobCartridge and Insert Not Included Order It Seprately
GRIP
Micro Boring Bars Bca 19-23...
₹ 4,621.00
Micro Boring Bars Are Used for Finishing Purpose .Please Check Boring Bar Range and Suitable Length for Your JobCartridge and Insert Not Included Order It Seprately
Jaibros
SK40 Er 25 Collet Chuck Sk4...
from ₹ 1,685.00
SK40 Tool Holder accepts all ER25 collets
ER25 Collets range from 1 mm to 16 mm Thread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundCoolant through capabilityGage length is 70mm,100MM,150MM,200MMRear thread for pull stud is M16 X 2.0
All holders have capability to become through coolant by simply removing screw in the center by allen key
Mars-Tech
ABT40 ER16A collet chuck 70...
from ₹ 3,128.00
ABT40 ER16A collet chuck 70/100/150LABT40 HOLDER CAN FIT INTO BBT40 CALIBRATED SPINDLE ONLY.
ABT40 Holder Taper and Both Faces Are in Contact With Spindle Due to Which Spindle and Holder Act as Single Unit This Allows a Higher "Radial Rigidity" Hence We Get Good Surface Finish and Dimensional Accuracy While Machining Also Low Vibration at Higher Speed Which Increases Tool Life
Collet Chuck Holder Is Balanced to G6.3-12000 Rpm
Mars-Tech
ISO 40 Holder face mill arb...
from ₹ 2,076.00
Facemill Adaptors are used or Modular style of facemill cutters.
General Guidance for choosing facemill size is
16 mm facemill arbor is used in 40 mm Cutter
22 mm facemill arbor is used in 50 AND 63 mm Cutter
27 mm facemill arbor is used in 80 mm Cutter
32 mm facemill arbor is used in 100 & 125 mm Cutter
40 mm facemill arbor is used in 160 mm Cutter
GRIP
Micro Boring Bars Bca 29-38...
₹ 4,801.00
Micro Boring Bars Are Used for Finishing Purpose .Please Check Boring Bar Range and Suitable Length for Your JobCartridge and Insert Not Included Order It Seprately
Mars-Tech
BT40 BST HOLDER for big siz...
from ₹ 5,607.00
BST adaptors are only used for rough and finish boring head which require BST type of holders , screws to fix into bst holder comes with boring head not with holder
comes in different length please choose length from variations
BST boring adapter for roughing and finishing boring tools
Mars-Tech
ABT40 ER40um collet chuck 7...
₹ 3,128.00
ABT40 ER40um collet chuck 70/100ABT40 HOLDER CAN FIT INTO BBT40 CALIBRATED SPINDLE ONLY.
ABT40 Holder Taper and Both Faces Are in Contact With Spindle Due to Which Spindle and Holder Act as Single Unit This Allows a Higher "Radial Rigidity" Hence We Get a Good Surface Finish and Dimensional Accuracy While Machining Also Low Vibration at Higher Speed Which Increases the Tool Life
Collet Chuck Holder Is Balanced to G6.3-12000 Rpm
Mars-Tech
ISO 40 Holder ER collet chu...
₹ 2,347.00
ISO40 Collet adaptor are used in Milling machine ( tool room machine ) ,
GRIP
Micro Boring Bars Bca 38- 4...
₹ 5,091.00
Micro Boring Bars Are Used for Finishing Purpose.Please Check Boring Bar Range and Suitable Length for Your JobCartridge and Insert Not Included Order It Seprately
Jaibros
Sk40 Er40 Collet Chuck Sk40...
from ₹ 1,685.00
SK40 Tool Holder accepts all ER40 collets
ER40 Collets range from 3 mm to 26 mm Thread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundCoolant through capabilityGage length is 70mm,100mm,150mm,200mmRear thread for pull stud is M16 X 2.0
All holders have capability to become through coolant by simply removing screw in the center by allen key
Mars-Tech
BT30 ER25UM-70L,100L ER Col...
₹ 1,505.00
BT30 ER25UM-70L,100L ER Collet Chuck
BT30 Tool Holder accepts all ER25 collets
ER25 Collets range from 1 mm to 16 mm The thread inside the internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundCoolant through capabilityThe gage length is 70mm,100MMThe rear thread for the pull stud is M12 X 1.75
All holders have the capability to become through coolant by simply removing the screw in the center with allen key