Endmill (55 HRC) 1

Tabikut 3.5 mm Carbide Endmill 55 H... ₹ 295.00

3.5 mm Carbide Endmill 55 HRC 4 mm Shank Length 50 MmSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill , side mill etc, Plastic Packaging for non-breakable packing

5 Carbide Endmill 55 HRC 5 mm Shank | endmill

Tabikut 5 Carbide Endmill 55 HRC 5 ... from ₹ 302.00

5 Carbide Endmill 55 HRC 5 mm Shank 4 Flutes Total Length Is 50/75/100 MMSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle , Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing

Tabikut 3mm Carbide Endmill tabikut... from ₹ 321.00

3mm Carbide Endmill tabikut 55 HRC50 mm Length price is for 2 Nos. If you order 1 quantity you will get 2 pcs 220 rs. price is for 2 nos. 1 will cost 110 rs. only. Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing

Tabikut 4 mm Carbide Endmill 55 HRC... from ₹ 321.00

4 mm Carbide Endmill 55 HRC 4 Flutes 50/75/100 long.50 mm Length price is for 2 Nos. you order 1 quantity you will get 2 pcs 330 rs. price is for 2 nos. 1 will cost 165 rs. only. Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable packing

Tabikut 1 mm Carbide Endmill 55 HRC... ₹ 342.00

1 mm Carbide Endmill 55 HRC PACK OF 2Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing Size of Carbide Endmill 55 HRC: 1mm

Tabikut 1.5 mm Carbide Endmill 55 H... ₹ 342.00

1.5 mm Carbide Endmill 55 HRC PACK OF 2Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc. Plastic Packaging for non-breakable packing Size of Carbide Endmill 55 HRC: 1.5mm

Tabikut 2 mm Carbide Endmill 55 HRC... ₹ 342.00

Solid Carbide Cutter are used to machine Hard and tough Material , Steel , Alloy Steel , Cast iron , stainless steel and many other material grades. Bronze TiSiN Coating , Endmill for Better Life and wear resistance.35 Degree Helix Angel , Grain Size 0.5μmUsed for Face Mill , Shoulder mill , side mill etc ,Plastic Packaging for non breakable packing

Tabikut 2.5 mm Carbide Endmill 55 H... ₹ 342.00

Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing

Sold out

Tabikut 6 mm Shank 1 mm Endmill 55 ... ₹ 443.00

6 mm Shank 1 mm Endmill 55 HRC Tabikut pack of 1Carbide Endmill-55 HRC SPECIAL SIZE OF 1MM CUTTING DIA 6 MM SHANK Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Black Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing

Tabikut 6 mm Shank 2 mm Endmill 55 ... ₹ 443.00

6 mm Shank 2 mm Endmill 55 HRC Tabikut pack of 1Carbide Endmill-55 HRC SPECIAL SIZE OF 2 MM CUTTING DIA 6 MM SHANK Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Black Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing

Tabikut 6 mm Shank 3 mm Endmill 55 ... ₹ 443.00

6 mm Shank 3 mm Endmill 55 HRC Tabikut pack of 1Carbide Endmill-55 HRC SPECIAL SIZE OF 3 MM CUTTING DIA 6 MM SHANK Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Black Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle , Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing

Tabikut 6 mm Shank 4 mm Endmill 55 ... ₹ 443.00

6 mm Shank 4 mm Endmill 55 HRC Tabikut pack of 1Carbide Endmill-55 HRC SPECIAL SIZE OF 4 MM CUTTING DIA 6 MM SHANK Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Black Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing

Tabikut 6 mm Shank 2 mm ballnose 55... ₹ 443.00

6 mm Shank 2 mm ballnose 55 HRC Tabikut pack of 1Carbide Ballnose-55 HRC SPECIAL SIZE OF 2 MM CUTTING DIA 6 MM SHANK Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Black Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle , Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing

Tabikut 6 mm Shank 2.5 mm ballnose ... ₹ 443.00

6 mm Shank 2.5 mm ballnose 55 HRC Tabikut pack of 1Carbide Ballnose-55 HRC SPECIAL SIZE OF 2 MM CUTTING DIA 6 MM SHANK Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Black Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing

Tabikut 6 mm Shank 3 mm ballnose 55... ₹ 443.00

6 mm Shank 3 mm ballnose 55 HRC Tabikut pack of 1Carbide Ballnose-55 HRC SPECIAL SIZE OF 3 MM CUTTING DIA 6 MM SHANK Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Black Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing

Tabikut 6mm Carbide Endmill 55 HRC ... from ₹ 511.00

6mm Carbide Endmill 55 HRC 4 Flutes Total Length Is 50/75/100/150 MMSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing

Tabikut 8mm Carbide Endmill 55 HRC ... from ₹ 551.00

8mm Carbide Endmill 55 HRC 4 Flutes Total Length Is 60/75/100/150/200 MMSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable packing

Tabikut 10 mm Carbide Endmill 55 HR... from ₹ 865.00

10 mm Carbide Endmill 55 HRCSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing

Tabikut 7 mm tabikut Carbide Endmil... ₹ 1,003.00

7 mm tabikut Carbide Endmill 55 HRC 4 Flutes Total Length Is 60 MM pack of 17 mm with 8 mm shank 60 mm overall length Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing

Tabikut 12 mm Carbide Endmill 55 HR... from ₹ 1,278.00

12 mm Carbide Endmill 55 HRC 4 Flutes Total Length Is 75/100/150/200 MMSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill , Shoulder mill, side mill etc, Plastic Packaging for non breakable packing