Thumbnail for 3.5mm Carbide End mill Ballnose

Thumbnail for 3.5 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1

3.5 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1

Brand - Tabikut

₹ 584.00

SKU: JBRS2407

NONE LEFT IN STOCK

Get Rs.50 Off on Prepaid Orders above Rs.500 via Razorpay Gateway. (Discount will be applied During Checkout at Payment Gateway) (No Code Required)

Product description

3.5 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1

check 2nd image for dimensions

65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size.

Helix Angel of 35 degrees, Suitable material grades to use on STEEL, STAINLESS STEEL , CAST IRON, AND TITANIUM

4 FLUTES , ALCR TIN COATING, tolerance of diameter is below 30 microns

Products are usually delivered in 3-7 days depending upon your location.

0 have this item in their cart.

Related Product

Tabikut 3.5 mm Carbide Endmill 55 H... ₹ 295.00

3.5 mm Carbide Endmill 55 HRC 4 mm Shank Length 50 MmSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill , side mill etc, Plastic Packaging for non-breakable packing

Tabikut 3.5 Mm Carbide Ballnose 55 ... ₹ 434.00

3.5 Mm Carbide Ballnose 55 HRC PACK OF 2Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes, if the total length increase flute length remains same as double of diameter.

Sign up for restock notifications!

Notify Me when this Product get back in Stock

Related Products

Tabikut 3.5 mm Carbide Endmill 55 H... ₹ 295.00

3.5 mm Carbide Endmill 55 HRC 4 mm Shank Length 50 MmSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill , side mill etc, Plastic Packaging for non-breakable packing

Tabikut 3.5 Mm Carbide Ballnose 55 ... ₹ 434.00

3.5 Mm Carbide Ballnose 55 HRC PACK OF 2Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes, if the total length increase flute length remains same as double of diameter.

They are must-haves