Gauges

Jaibros Fillet Welding GAGE 1/8 to ... ₹ 943.00

➢Measure Fillet Weld Leg Length ➢Measure Fillet Weld Throat Thickness ➢Use for Inspection of Concave and Convex Fillet weld ➢ Sturdy as this Gauge made of Steel ➢All Numerical Values Indication Size are Clear and Can Easily Read Out ➢Most of reading are in Metric(mm) Features: ➢Measure Fillet Weld Leg Length ➢Measure Fillet Weld Throat Thickness ➢Use for Inspection of Concave and Convex Fillet weld ➢ Sturdy as this Gauge made of Stainless Steel ➢All Numerical Values Indication Size are Clear and Can Easily Read Out ➢Most of reading are in Metric(mm)

Jaibros Center Gauge 55 degree Cent... ₹ 235.00

Used to check thread angle and pitch of thread cutting tools. / Use to grind and position thread cutting tool on a lathe 55 degree angle, tempered with a satin-chrome finish Extremely handy for use in grinding and setting screw cutting tools / Hardened with lapped edges and notches Very useful for finding number of threads per inch through graduations in 1/14" and 1/20" of an inch on center gauge Ground gauging surfaces. Center gauge with inch graduations

Sold out

Dasqua radius gauge choose from (1 to 7 mm ) pack of 1

Dasqua Dasqua radius gauge choose ... ₹ 682.00

Radius gauge is used to measure die pattern tools etc to check the radius even a round shanks , Radius of Leaves Included(mm) : 1 mm, 1.25 mm, 1.5 mm, 1.75 mm, 2 mm, 2.25 mm, 2.5 mm, 2.75 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm, 6 mm, 6.5 mm,7 mm Quantity of Leaves : 34.0 The radius measurement is usually in metric form and measured in mm(millimeter). The material used is entirely made up of steel, but a layer or finish of satin chrome can be added since it keeps the radius gauge corrosion free and gives them more rust resistance. The blades used are of the concave and convex shape. It may be swung out of the holder case when necessary readings need to be taken as per the requirement. High quality material and precision machining process ensure product quality.• A traceable QC system is worthy of your trust.• Efficient warehouse and logistics management ensure your delivery time.• A two-year warranty makes you without the worries behind.

Sold out

Dasqua radius gauge choose from (7.5 to 15 mm ) pack of 1

Dasqua Dasqua radius gauge choose ... ₹ 705.00

Radius gauge is used to measure die pattern tools etc to check the radius even a round shanks , Radius of Leaves Included(mm) : 1 mm, 1.25 mm, 1.5 mm, 1.75 mm, 2 mm, 2.25 mm, 2.5 mm, 2.75 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm, 6 mm, 6.5 mm,7 mm Quantity of Leaves : 34.0 The radius measurement is usually in metric form and measured in mm(millimeter). The material used is entirely made up of steel, but a layer or finish of satin chrome can be added since it keeps the radius gauge corrosion free and gives them more rust resistance. The blades used are of the concave and convex shape. It may be swung out of the holder case when necessary readings need to be taken as per the requirement. High quality material and precision machining process ensure product quality.• A traceable QC system is worthy of your trust.• Efficient warehouse and logistics management ensure your delivery time.• A two-year warranty makes you without the worries behind.

Sold out

Jaibros Lathe Alignment Test Bar Ma... ₹ 1,180.00

Product description Shank Size : Morse Taper 2 Overall length : xxxxxx Best Quality , Lowest price , Make in India product. Shank Size – MT 2 Re-align the tail-stock on your lathe to eliminate that slight taper when turning over a long distance. Manufactured from EN31 Alloy Selected Steel. Useful for alignment test between centers as well as in Morse Taper Spindles. Accuracy within 1 to 2 micron. Max.run-out : 0.0001″. Shank Size : Morse Taper 2 Overall length : Overall length : xx x/xx" (xxxmm) EN31 Alloy Selected Steel, Hardened and Ground

DASQUA High Accuracy MINI Dial Indicator

Dasqua DASQUA High Accuracy MINI D... ₹ 2,538.00

Specifications Product Name: Dial IndicatorItem Number: 5121-1202Measuring Range: 0~5 mm Graduation: ±0.01 mm / 0.0005’’Accuracy: 0.017 mm / 0.0005’’Warranty: Two Years Features • Used to measure surface flatness as well as axial runout and also used to check tool set up and squareness• Limit indicator clips included• Strictly made in accordance with DIN878• Jeweled bearings providing the lowest possible bearing friction• With narrowed range and higher accuracy Application Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Dial and dial test indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation. Advantage Of DASQUA • High quality material and precision machining process ensure product quality；• A traceable QC system is worthy of your trust；• Efficient warehouse and logistics management ensure your delivery time；• A two-year warranty makes you without the worries behind； Tips Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement. Package Content 1 x Dial Indicator1 x Protective Case1 x Warranty Letter

Sold out

Jaibros Lathe Alignment Test Bar Ma... ₹ 3,422.00

Shank Size MT5 Overall length : 442mm (17-1/2") Best Quality , Lowest price , Make in India product. Shank Size – MT 5 Re-align the tail-stock on your lathe to eliminate that slight taper when turning over a long distance. Manufactured from EN31 Alloy Selected Steel. Useful for alignment test between centers as well as in Morse Taper Spindles. Accuracy within 1 to 2 micron. Max.run-out : 0.0001″.

Sold out

Jaibros Lathe test bar mandrel MT4 ... ₹ 1,758.00

Shank Size : Morse Taper 4 Overall length : 15-1/4"( 385mm ) Best Quality , Lowest price , Make in India product.

Sold out

Jaibros unigrip vice 5 inches 125 m... ₹ 3,009.00

Compact and Indispensable vice for drilling machines. Hardened and ground steel jaws provided with horizontal and vertical notches for holding round, square and irregular jobs. Available in cast iron Compact and Indispensable vice for drilling machines. Hardened and ground steel jaws provided with horizontal and vertical notches for holding round, square and irregular jobs. Available in cast iron Width of jaws in mm125 Depth of jaws in mm25

Lathe Knurling Tool holder scissor type 5 Inch BLACK

Jaibros Lathe Knurling Tool holder ... ₹ 1,416.00

Scissor type 5 inch shank 1/2 inch can fit into lathe easily Hardened Steel Knurls for longer life comes fitted in Knurling holders. Make in India product. QUICK ACTING SCISSOR TYPE LATHE KNURLING TOOL HOLDER Shank: 1/2" x 1/2" Length: 5" comes fitted in Knurling holders. Knurling pressure is absorbed between two knurls. Depth of knurling impression can be pre-set for production work before start of operation.

Sold out

Jaibros Firm Joint Caliper 16 inch/... from ₹ 614.00

Firm Joint Caliper Steel 16 inch 400mm Made of Stainless Steel Make in India

Sold out

Unigrip vice 3 inches 75 mm for drill machines blue color pack of 1

Jaibros Unigrip vice 3 inches 75 mm... ₹ 2,891.00

Compact and Indispensable vice for drilling machines. Hardened and ground steel jaws provided with horizontal and vertical notches for holding round, square and irregular jobs. Available in cast iron Compact and Indispensable vice for drilling machines. Hardened and ground steel jaws provided with horizontal and vertical notches for holding round, square and irregular jobs. Available in cast iron Width of jaws in mm100 Depth of jaws in mm25 Opening of jaws in mm(Lower portion)115 Opening of jaws in mm(Upper portion)120 Length overall in mm320 Height overall in mm55 Width overall in mm175 Weight (Approx) in kgs.4

Dasqua DASQUA Professional 300mm /... ₹ 12,000.00

Specifications Product Name: Height GaugeItem Number: 3110-6105Measuring Range: 0-300 / 0-12″Graduation: 0.02 / 0.001″Accuracy: 0.03 mm / 0.0012’’Warranty: Two Years Features • Magnifier for easier reading• Adjustable main beam to set the zero reference point• Made of stainless steel, widened and thickened• Carbide tipped scriber for sharp, clean lines• With fine adjustment• Satin chrome-finished scales• Base hardened, ground and lapped for maximum flatness• Dustproof shield optional Application The height gauge is an instrument for dimensional measurement of all kinds of mechanical parts. It is mainly used in the workshop to provide a quick and easy measurement of parts in production. Advantage Of DASQUA • High quality material and precision machining process ensure product quality；• A traceable QC system is worthy of your trust；• Efficient warehouse and logistics management ensure your delivery time；• A two-year warranty makes you without the worries behind； Package Content 1 x Height Gauge1 x Warranty Letter

Get Extra 1% Discount on Jaibros App only

Find anything you need

GST Input Credit

7-Day Return

Lowest Prices

Highest Quality