Mars-Tech
All products Accessories All Ballnose (45 HRC) Ballnose (55 HRC) Ballnose (60 HRC) Ballnose (65 HRC) Ballnose (Inserted) Ballnose - 45 HRC Ballnose - 55 HRC Ballnose - 55 HRC 1 Ballnose - 60 HRC Ballnose - 60 HRC 1 BBT40 Holders Boring Heads BPT BT-30 Type BT-40 BCA BT-40 Type Carbide Cutters Carbide Cutters CBN Inserts Ceratizit Chamfer Cutter Chamfering Collet Chucks Collet Chuks Collet ER Type -1 Collets - ER Type Cutters High Feed Cylindrical Chuks Cylndrical Chuck 1 Dasqua Deal of the Day Dijet Drill Chuck - Keyless Duracarb Edge Finders Endmill (45 HRC) Endmill (55 HRC) 1 Endmill (60 HRC) Endmill (Inserted) Endmill - 45 HRC Endmill - 55 HRC Endmill - 55 HRC 1 Endmill - 60 HRC Endmill - 60 HRC 1 Endmill Ballnose - Micro ER Collets ER Nuts ER Spanners ER Tap Collets Find the Edge Find the Edge 1 Gauges Grooving Inserts Grooving Work Grooving Work 1 Heads - Boring High Feed Hitachi Indexable Cutters Inserted Ballnose Inserted Cutters Inserted Endmill Inserts ISO40 Holders Jaibros JXD Keyless Drill Chuck Knob- Pull Studs Knob- Pull Studs 1 Korloy Korloy Kyocera Life Locking Device Mars-Tech Measurings Metrology Micro Endmill Ballnose Milling Inserts Milling Opertations Milling Opertations 1 Miscellaneous Mitsubishi Non-Ferrous Nuts - ER Nuts ER 1 PCD Inserts Pull Studs Single Flute Endmill SK-40 Type Spanners - ER Spanners - ER 1 Straight Shank Chucks Tabikut TaeguTec Threading Application Threading Application 1 Threading Inserts Tool Boy Tool Boy 1 Torx Keys Torx Screws Turning Holders Turning Inserts Turning Usage Turning Usage 1 U Drill Widia Yuzuki Z Setter ZCCCT Zero Setter Zero Setter 1
Mars-Tech 50 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPmt1204 R6 Of Mostly Brand from ₹ 1,100.00
EMRW-6R-50-22-4T suitable to R6 insert This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this , Recommended Suitable insert for this cutter is TABIKUT Carbide Insert 
Mars-Tech EMRW-C25-6R25-150L 25 Mm Bullnose Suitable To RPMT1204 Insert from ₹ 1,000.00
This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT1204/RDKW1204,R6 OF mostly brand into this , Suggested insert RPMT1204 OF Tabikut Brand.
Mars-Tech 80 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT1204 R6 Of Mostly Brand ₹ 1,750.00
EMRW-6R-80-27-6T suitable to R6 insert This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this , Recommended Suitable insert for this cutter is TABIKUT Carbide Insert 
Mars-Tech 16mm inseted ballnose for R4 insert 08T2/0803 pack of 1 ₹ 1,000.00
EMRT-C16-4R16-200L THERE ARE 2 TYPES IF YOU NEED 0803 PLEASE CHECK THICKNESS OF INSERT  08T2 HAS THICKNESS OF 2.78 MM ( CHIP BREAKER SURFACE) 0803 HAS THICKNESS OF 3.18 MM ( PLAIN SURFACE) This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMW08T2/RDKW08T2/0803/R4 OF mostly brand into this ,
Mars-Tech EMR-C25-5R25- 25 Mm Bullnose Suitable To RPMT10T3 Insert from ₹ 800.00
EMRT-C25-5R25-150/200/250 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMW10T3/RPKT103/R5 OF mostly brand into this ,   please note this is not for 1003 , 10T3 Thickness is 3.87 mm and RPMW1003 thickness is 3.18 mm and 10T3 have design on it. 
Mars-Tech 63 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT1204 R6 Of Mostly Brand from ₹ 1,280.00
EMRW-6R-63-22-4T suitable to R6 insert This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this , Recommended Suitable insert for this cutter is TABIKUT Carbide Insert 
Mars-Tech 52 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT1204 R6 Of Mostly Brand ₹ 1,250.00
EMRW-6R-52-22-4T suitable to R6 1204 insert This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts RPMT1204/RDKW1204/R6 OF mostly brand into this ,zccct,korloy,taegutec,dijet,kyocera,mitsubishi,
Mars-Tech 32 MM Bull Nose In 32 Mm Shank - 2 Pocket Suitable To RPMT1204 /R6 from ₹ 1,500.00
EMRW-C32-6R32-200L-2T , EMRW-C32-6R32-250L-2T This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT1204/RDKW1204,R6 OF mostly brand into this , Suggested insert RPMT1204 OF Tabikut Brand.
Mars-Tech 100 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT1204 R6 Of Mostly Brand ₹ 2,750.00
EMRW-6R-100-32-6T suitable to R6 insert This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this , Recommended Suitable insert for this cutter is TABIKUT Carbide Insert 
Mars-Tech 50 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RDMT1204MOTN HITACHI brand ₹ 1,200.00
TRS-6R-50-22-4T suitable to hitachi R6 insert This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of Hitachi Brand Insert RDMT1204 MOTN Recommended Suitable insert for this cutter is TABIKUT Carbide Insert 
Mars-Tech 160 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT1204 R6 Of Mostly Brand ₹ 6,000.00
EMRW-6R-160-40-8T suitable to R6 insert 6 INCH cutter This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this , Recommended Suitable insert for this cutter is TABIKUT Carbide Insert 
Mars-Tech 32 MM Bull Nose in 25 mm Shank - 2 pocket suitable to RPMT1204 /R6 from ₹ 1,200.00
EMRW-25-6R32-200L-2T , EMRW-C25-6R32-250L-2T This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT1204/RDKW1204,R6 OF mostly brand into this , Suggested insert RPMT1204 OF Tabikut Brand.
Mars-Tech 25 mm Bullnose reduce shank 20 mm suitable to RPMW1003 insert from ₹ 800.00
EMRW-C20-5R25-150L EMRW-C20-5R25-200L This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMW1003/RDKW103/R5 OF mostly brand into this ,   please note this is not for RPMT10T3 , 10T3 Thickness is 3.87 mm and RPMW1003 thickness is 3.18 mm and 10T3 have design on it. 
Mars-Tech 125 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT1204 R6 Of Mostly Brand ₹ 3,750.00
EMRW-6R-125-40-7T suitable to R6 insert 5 INCH FACING CUTTER This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this , Recommended Suitable insert for this cutter is TABIKUT Carbide Insert 
Mars-Tech 20 MM bull cutter suitable to RPMW1003 insert in 150 and 200 length ₹ 750.00
EMRW-C20-5R20-150L EMRW-C20-5R20-200L This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMW1003/RDKW103/R5 OF mostly brand into this ,   please note this is not for RPMT10T3 , 10T3 Thickness is 3.87 mm and RPMW1003 thickness is 3.18 mm and 10T3 have design on it. 
Mars-Tech 50 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT12T3 R6 Of Mostly Brand from ₹ 1,000.00
EMRW-6R-50-22-4T suitable to R6 12T3 insert This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts Or DIJETof RDMT12T3 RPMT12T3/RDKW12T2/R6 OF mostly brand into this , Recommended Suitable insert for this cutter is TABIKUT Carbide Insert 
Sold out
Mars-Tech 20 MM Bull Cutter Suitable To RPMW0802 R4 Insert In 150 And 200 Length from ₹ 800.00
EMRW-C20-4R20-150L EMRW-C20-4R20-200L This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMW0802/RDKW0802/R4 OF mostly brand into this ,
Mars-Tech 50 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT10T3 R5 Of Mostly Brand ₹ 1,250.00
FOR TECHNICAL DETAILS GO TO SECOND IMAGE OF PRODUCT EMRT-5R-50-22-4T SUITABLE TO R5 RPMT10T3  This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT10T3/RPKT10T3/R5 OF mostly brand into this ,   please note this  10T3 Thickness is 3.87 mm and RPMW1003 thickness is 3.18 mm and 10T3 have design on it. also a picture to check both types. 
Mars-Tech 63MM Bull Cutter In 5 Pockets EMRW6R-63-22-5T ₹ 1,550.00
EMRW6R-63-22-5T Cutter is suitable to ISO insert of R6 RPMT1204 of mostly brands this is 5 pocket cutter for finishing purpose     
Sold out
Mars-Tech 50 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To R6 of Sandvik Brand only. ₹ 900.00
R200-6R-50-22-4T suitable to Sandvik Insert R6 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of R6 of Sandvik Brand only

GST Input Credit

Get Business Invoice and get 100% GST Input Credit for your Order.

7-Day Return

If you dont like the Product, Return it within 7 Days and get 100% refund.

Lowest Prices

We are offering Products at Lowest Prices in the Industry*.

Highest Quality

We strive to provide best quality product .