Inserted Endmill

APKT11T3 Indexable Milling Cutter For Dia 20

Mars-Tech APKT11T3 Cutter For Dia 20 ... ₹ 1,805.00

APKT11T3 Cutter For Dia 20 In 20 Mm Shank Size 200 Length Suitable To ZCCCT Brand InsertsThis is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use APKT11T3 For ZCCCT Brand Insert into this, If any other brand have same insert can also fix to this cutter body Kindly Take Care it's not for APMT1135 it's only for APKT11T3

XOMX1804 Inserted Endmill Cutter Dia 25 And 32 Mm

Mars-Tech XOMX1804 Inserted Endmill C... from ₹ 2,227.00

R217.69-2525.0-XO18-2AN,R217.69-3232.0-XO18-3AN This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use XOMX1804 For SECO Brand Insert into this , If any other brand have same insert it can also fixed to this.

32 mm AOMT18 cutter Indexable Inserted Endmill

Mars-Tech 32 mm AOMT18 cutter Indexab... ₹ 2,467.00

32 mm AOMT18 cutter Indexable Inserted Endmill Dia 32 Mm 3 Pocket Suitable For Mitsubishi InsertThis is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC not to wear out, Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use AOMT184808 For Mitsubishi Brand Insert into this If any other brand has same insert it can also fixed to this.

SDMT1204 Milling Cutter DIA 50,63,80,100 suitable to Widia Insert M690 series pack of 1

Mars-Tech SDMT1204 Milling Cutter DIA... from ₹ 3,100.00

CUTTER WITH THROUGH COOLANT HOLES This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use SDMT1204 Of WIDIA and Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check descriptions of sizes from other brands to fix this insert.

TPKN16 Milling cutter 50/63/80 mm pack of 1

Mars-Tech TPKN16 Milling cutter 50/63... from ₹ 3,776.00

TPKN16 insert cutter

Mars-Tech EPNW0603 suitable Dia 16mm ... ₹ 1,444.00

ASR-EPNW06-C16-16-200L-2T This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use EPNW0603 FOR hitachi Brand Insert into this , If any other brand have same insert it can also fixed to this.

Mars-Tech 25 mm ZCMT10 Insert cutter ... ₹ 2,166.00

25 mm ZCMT10 Insert cutter 200 mm long pack of 1Note: 25 MM body has 3 Pockets. Product Description SICL 1610S16-2N-150L SICL 2010S20-2N-200L SICL 2510S25-3N-200L This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC not to wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides,this cutter is suitable to ZCMT1003 from DIJET brand. If any other brand have same insert you can use for this cutter.

XOMX1204 Inserted Endmill Cutter Dia 25 and 32 mm

Mars-Tech XOMX1204 Inserted Endmill C... from ₹ 1,745.00

R217.79-2525.0-XO12-2AN,R217.79-3232.0-XO12-3AN This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use XOMX1204 For SECO Brand Insert into this , If any other brand have same insert it can also fixed to this.