SDMT120512 PH T20 High Feed insert pack of 10 Tabikut
Related Products
![50mm sdmt1205 feed cutter](http://jaibros.com/cdn/shop/products/Untitleddesign_5_375x.png?v=1680068632 375w,//jaibros.com/cdn/shop/products/Untitleddesign_5_410x.png?v=1680068632 410w,//jaibros.com/cdn/shop/products/Untitleddesign_5_520x.png?v=1680068632 520w,//jaibros.com/cdn/shop/products/Untitleddesign_5_576x.png?v=1680068632 576w,//jaibros.com/cdn/shop/products/Untitleddesign_5_768x.png?v=1680068632 768w,//jaibros.com/cdn/shop/products/Untitleddesign_5_992x.png?v=1680068632 992w,//jaibros.com/cdn/shop/products/Untitleddesign_5_1024x.png?v=1680068632 1024w,//jaibros.com/cdn/shop/products/Untitleddesign_5_1280x.png?v=1680068632 1280w)
Mars-Tech
50 mm sdmt1205 High feed cu...
₹ 2,166.00
50 mm sdmt1205 High feed cutter suitable to tabikut Deskar Gesac brandASRF12-50-22-4T , ASRF12-63-22-4T
This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use SDMT1205 Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check descriptions of sizes from other brands to fix this insert.
![high feed cutter](http://jaibros.com/cdn/shop/products/Untitleddesign_4_375x.png?v=1680069095 375w,//jaibros.com/cdn/shop/products/Untitleddesign_4_410x.png?v=1680069095 410w,//jaibros.com/cdn/shop/products/Untitleddesign_4_520x.png?v=1680069095 520w,//jaibros.com/cdn/shop/products/Untitleddesign_4_576x.png?v=1680069095 576w,//jaibros.com/cdn/shop/products/Untitleddesign_4_768x.png?v=1680069095 768w,//jaibros.com/cdn/shop/products/Untitleddesign_4_992x.png?v=1680069095 992w,//jaibros.com/cdn/shop/products/Untitleddesign_4_1024x.png?v=1680069095 1024w,//jaibros.com/cdn/shop/products/Untitleddesign_4_1280x.png?v=1680069095 1280w)
Mars-Tech
63 Mm For SDMT1205 High Fee...
₹ 2,347.00
63 Mm For SDMT1205 High Feed Cutter Dia Insert Suitable To Deskar Gesac BrandASRF12-50-22-4T , ASRF12-63-22-4T
This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use SDMT1205 Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making same inserts so you can just check descriptions of size from other brands to fix this insert.
![High Feed Cutter Dia 80 Mm For SDMT1205 Insert Suitable To Deskar, Gesac Brand](http://jaibros.com/cdn/shop/products/DSC_0500_1_375x.jpg?v=1671627525 375w,//jaibros.com/cdn/shop/products/DSC_0500_1_410x.jpg?v=1671627525 410w,//jaibros.com/cdn/shop/products/DSC_0500_1_520x.jpg?v=1671627525 520w,//jaibros.com/cdn/shop/products/DSC_0500_1_576x.jpg?v=1671627525 576w,//jaibros.com/cdn/shop/products/DSC_0500_1_768x.jpg?v=1671627525 768w,//jaibros.com/cdn/shop/products/DSC_0500_1_992x.jpg?v=1671627525 992w,//jaibros.com/cdn/shop/products/DSC_0500_1_1024x.jpg?v=1671627525 1024w,//jaibros.com/cdn/shop/products/DSC_0500_1_1280x.jpg?v=1671627525 1280w)
Mars-Tech
High Feed Cutter Dia 80 Mm ...
₹ 5,416.00
ASRF12-80-27-6T , ASRF12-63-22-4T
This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use SDMT1205 Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.
They are must-haves
Check out these awesome collections!
Turning Inserts
VIEW ALL![](http://jaibros.com/cdn/shop/files/jbrs1210_80x.png?v=1701328627)
TCMT16T304/08 t20 Tabikut insert PACK OF 10
₹ 1,345.00
![](http://jaibros.com/cdn/shop/products/DSC_0846-_1_80x.jpg?v=1689246644)
VNMG160404/08 TM 4509 pack of 10
₹ 1,593.00