Tabikut

Sold out

Tabikut CNGA120408 FBS700 CBN Inser... ₹ 885.00

CBN inserts for Hardened steel This is with 6 corners smooth and interrupted cut

TCMT16T304/08 MT CT1500 Cermet insert pack of 10

Tabikut TCMT16T304/08 MT CT1500 Cer... ₹ 1,888.00

CT1500 UNCOATED Cermet grade for turning, grooving & parting of alloy steels & stainless steels with high surface quality and long tool life due to high wear resistance and low coefficient of frictionISO Range - P/M/K (P10-P20)(M10-M20)(K10-K20)IGrade or Coating Type CERMETCoating Layers CermetGrade Color METAL

Sold out

Taper ballnose 2 mm with 6 mm shank pack of 1

Tabikut Taper ballnose 2 mm with 6 ... ₹ 885.00

Taper ballnose 2 mm Dia 1 mm Radius with taper flute length of 20 mmused for steel and stainless steel grade

tpgx060102/04L x25 TABIKUT carbide grade pack of 10

Tabikut tpgx060102/04L x25 TABIKUT ... ₹ 1,770.00

boring insert for small sizes THIS INSERT IS SMALL TRAINGULAR INSERTS TCGT,TPGH also internchanageable with this

Sold out

Tabikut 3.5 mm Carbide Endmill 65 H... ₹ 584.00

3.5 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1check 2nd image for dimensions 65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size. Helix Angel of 35 degrees, Suitable material grades to use on STEEL, STAINLESS STEEL , CAST IRON, AND TITANIUM 4 FLUTES , ALCR TIN COATING, tolerance of diameter is below 30 microns

SPMG050204 DG2615 grade Carbide drilling Insert for Indexable U drill copper pack of 10

Tabikut SPMG050204 DG2615 grade Car... ₹ 1,593.00

SPMG 050204 suitable to Indexable U drills 13MM,13.5MM,14MM,14.5MM,15 mm mostly Cutting speed Vc 150-220 m/min , feed 0.05-0.12 copper coated for Stainless steel

WNMG080404 HA N01 aluminum machining insert pack of 10

Tabikut WNMG080404 HA N01 aluminum ... ₹ 1,534.00

This insert is suitable to non ferrous material only like Aluminum , brass , gold , silver select the radius as per the requirment.

Tabikut 13 mm Carbide Endmill 55 HR... ₹ 2,893.00

13 mm Carbide Endmill 55 HRC 4 Flutes Total Length 100mm pack of 113 MM in 14 mm shank 100 mm total length Solid Carbide Cutter are used to machine Hard and tough Material , Steel , Alloy Steel , Cast iron , stainless steel and many other material grades. Bronze TiSiN Coating , Endmill for Better Life and wear resistance.35 Degree Helix Angel , Grain Size 0.5μmUsed for Face Mill , Shoulder mill , side mill etc ,Plastic Packaging for non breakable packing

WNMG080408 CQ 4509 Chipbreaker Insert Steel Grade Of Tabikut Pack Of 10

Tabikut WNMG080408 CQ 4509 Chipbrea... ₹ 1,322.00

WNMG080404/08/12 CQ4509 Carbide Insert with 0.8 mm Radius used on Steel , Mild Steel General Parameters are mentioned on box 1 Box contain 10 inserts. This is Steel Grade not cast iron

cnmg120404/08/12 cx for Steel & Stainless Steel TABIKUT Mild Steel Pack Of 10

Tabikut cnmg120404/08/12 cx for Ste... ₹ 1,711.00

This Turning insert is for steel and stainless steel and its performance is amazing for finishing and roughing both purpose just try once and beat your current insert performance

Micro Endmill 0.9 Mm 4mm Shank 2 Flutes (60 HRC)

Tabikut Micro Endmill 0.9 Mm 4mm Sh... ₹ 561.00

Micro Endmill 0.9 mm with 2 Flutes and 4 mm Shank 1.8 mm Flute Length HRC60

TABIKUT R5 Carbide Insert RPGT10T3 TABIKUT pack of 10

Tabikut TABIKUT R5 Carbide Insert R... ₹ 1,711.00

Carbide insert for Aluminum Brass , Non ferrous material , used in any suitable cutter for EMRW5R and this is used in milling machine mainly. Suitable cutter any cutter which suits RPMT10T3 insert. Not For steel and hard materialR5 for EMRW5R-CutterSUITABLE TO ALL MILLING CUTTER FOR R5 -10T3

Sold out

Tabikut 6mm Shank 2mm Ballnose in ... ₹ 425.00

6mm Shank 2mm Ballnose in 2 flutes (45HRC)Carbide BALLNOSE 2 FLUTES 45 HRC Solid Carbide Cutter is used to machining Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Black Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable packing

Tabikut 6 mm Uncoated endmill pack ... from ₹ 311.00

2/3/4 Flute uncoated Carbide Endmills are used for non-ferrous materials and soft materials like aluminum, brass, copper, silver, and gold. A uncoated endmill is for longer life on aluminum or sticky material machining. The large core diameter is more stable A negative rake angle design enhances the rigidity of the tool TF25 carbide rod for soft material.

Tabikut 4 mm 4 flute Ballnose 55 hr... from ₹ 236.00

4 Flutes Ballnose. Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable packing Size of Carbide Ballnose 55 Hrc: 4mm The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes if the total length increase flute length remains the same double diameter

Corner Radius Endmill 2 mm in 0.5 mm radius pack of 1

Tabikut Corner Radius Endmill 2 mm ... ₹ 295.00

A Corner radius endmill End Mill is usually used to add a specific radius to a workpiece, operation to remove a sharp edge or burr or using in some finishing operation most cutters comes with 0.5 mm , 1 mm 1.5 mm even 2 or 3 mm radius please choose as per the requirment.

8 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1

Tabikut 8 mm Carbide ballnose 65 HR... from ₹ 1,566.00

8 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1check 2nd image for dimensions 65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size. Helix Angel of 35 degree, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM 2 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns

2.5 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1

Tabikut 2.5 mm Carbide ballnose 65 ... ₹ 584.00

2.5 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1check 2nd image for dimensions 65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size. Helix Angel of 35 degree, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM 2 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns

Sold out

1 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1

Tabikut 1 mm Carbide ballnose 65 HR... ₹ 584.00

1 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1check 2nd image for dimensions 65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size. Helix Angel of 35 degree, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM 2 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns

DCMT070204 HQ TN30 Cermet insert pack of 10

Tabikut DCMT070204 HQ TN30 Cermet i... ₹ 1,416.00

TN30 Cermet grade for Steel & Stainless Steel MachiningGeneral purpose cermet with superior wear resistance and toughness for steel and stainless steel finishing.Tabikut is known as a leading manufacturer of cermets. Cermet is a composite material combining Ceramic and Metal. Typical materials used in cermets are TiC, TiN, TiCN and NbC. Designed to provide long tool life and excellent surface finishes, cermets combine toughness with superior wear resistance."Great for finishing applications ISO Range - P/M/K (P10-P20)(M10-M20)(K10-K20)IGrade or Coating Type CERMETCoating Layers CermetGrade Color METAL